Nissan Sentra. Manual — part 715
DOOR SWITCH
PWC-57
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
3. Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness between BCM and door switch.
3.
CHECK DOOR SWITCH
PWC-57, "WITHOUT INTELLIGENT KEY : Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Replace malfunctioning door switch.
4.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
.
>> Inspection End.
WITHOUT INTELLIGENT KEY : Component Inspection
INFOID:0000000009757274
1.
CHECK DOOR SWITCH
1. Turn ignition switch OFF.
2. Disconnect door switch connector.
3. Check door switch.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace malfunctioning door switch.
BCM connector
Terminal
Door switch
connector
Terminal
Continuity
B57
45
B28 (Front RH)
3
Yes
48
B41 (Rear RH)
46
B21 (Front LH)
47
B26 (Rear LH)
BCM connector
Terminal
Ground
Continuity
B57
45
No
48
46
47
Terminal
Door switch condition
Continuity
Door switch
3
Ground part of
door switch
Pressed
No
Released
Yes
PWC-58
< DTC/CIRCUIT DIAGNOSIS >
POWER WINDOW LOCK SWITCH
POWER WINDOW LOCK SWITCH
Description
INFOID:0000000009757275
Ground circuit of main power window and door lock/unlock switch shuts off if power window lock switch of
main power window and door lock/unlock switch is operated. This inhibits all operation, except for the main
switch.
Component Function Check
INFOID:0000000009757276
1.
CHECK POWER WINDOW LOCK SIGNAL
Exchange for a normal main power window and door lock/unlock switch, and check operation.
Is the inspection result normal?
YES
>> Replace main power window and door lock/unlock switch. Refer to
. After that, refer to
NO
>> Check condition of harness and connector.
Special Repair Requirement
INFOID:0000000009757277
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Is the inspection result normal?
YES
>> Inspection end.
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
POWER WINDOWS DO NOT OPERATE WITH POWER WINDOW MAIN SWITCH
PWC-59
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
SYMPTOM DIAGNOSIS
POWER WINDOWS DO NOT OPERATE WITH POWER WINDOW MAIN
SWITCH
Diagnosis Procedure
INFOID:0000000009757278
1.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
(with Intelligent Key) or
BCS-120, "Diagnosis Procedure"
Intelligent Key).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch power supply and ground circuit.
PWC-33, "POWER WINDOW MAIN SWITCH : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE POWER WINDOW MAIN SWITCH
• Replace power window main switch.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
PWC-60
< SYMPTOM DIAGNOSIS >
DRIVER SIDE POWER WINDOW DOES NOT OPERATE
DRIVER SIDE POWER WINDOW DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009757279
1.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
Check front power window motor (driver side).
PWC-43, "DRIVER SIDE : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE POWER WINDOW MAIN SWITCH
• Replace power window main switch.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст