Nissan Cube. Manual — part 796
SE-16
< REMOVAL AND INSTALLATION >
FRONT SEAT
5.
Remove the metal clip and pawls, and then pull out seat cushion
inner finisher.
6.
Remove the seat belt buckle. Refer to
SB-8, "SEAT BELT BUCKLE : Removal and Installation"
.
7.
Remove the seat cushion assembly.
• Remove the seat cushion trim retainer.
• Remove the seat cushion assembly from the seat cushion frame.
8.
Remove the seat cushion silencer.
9.
Remove the reclining device cover.
• Remove the screws, and then reclining device outer cover (front, rear).
• Remove the screws, and then reclining device inner cover (front, rear).
10. Remove the mounting bolt, and then remove seatback frame.
11. Remove the following parts after removing seatback frame.
• Remove the seat cushion mat.
• Remove occupant detection system control unit. Refer to
SR-29, "Removal and Installation"
.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat trim in position, and then securely connect the trim or trim cord with the
pad side wire.
: Metal clip
: Pawl
JMJIA2937ZZ
REAR SEAT
SE-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT
Exploded View
INFOID:0000000009950076
1.
Headrest
2.
Seatback trim
3.
Seatback pad
4.
Seatback silencer
5.
Seat cushion silencer
6.
Seat cushion trim
7.
Seat cushion pad
8.
Seat slide cover
9.
Seat cushion frame
10. Outer hinge finisher
11.
Seat belt buckle (side)
12. Seat belt buckle (center)
13. Reclining strap
14. Rivet A
15. Rivet B
16. Inner finisher
17. Reclining device cover
18. Headrest holder (locked)
19. Headrest holder (free)
20. Seatback frame
21. Seatback bush
JMJIA3103GB
SE-18
< REMOVAL AND INSTALLATION >
REAR SEAT
Removal and Installation
INFOID:0000000009950077
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the headrest.
2.
Remove the pawls, and then remove seat slide cover.
3.
Remove the rear right side mounting bolt.
4.
Remove the rear left side mounting bolt.
5.
Remove the front right side mounting bolt.
6.
Remove the front left side mounting bolt.
7.
Remove the rear seat assembly from back door.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
Disassembly and Assembly
INFOID:0000000009950078
SEATBACK
Disassembly
1.
Remove the armrest assembly.
• Remove the seatback retainers (1), and then open the fasten-
ers (2).
• Remove the armrest hinge bracket mounting nuts.
22. Cup holder
23. Armrest hinge finisher
24. Armrest hinge bracket
25. Armrest hinge bush B
26. Armrest hinge bush A
27. Armrest assembly
28. Armrest hinge inner bush
Refer to
for symbols in the figure.
: Pawl
JMJIA2939ZZ
JMJIA2940ZZ
REAR SEAT
SE-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• Remove the pawl of armrest hinge inner bush, and then slide
armrest assembly.
2.
Remove the seatback trim and seatback pad.
• Remove the seatback retainers (1), and then open the fasten-
ers (2).
• Remove the headrest holder.
CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
• Remove the seatback trim and seatback pad from seatback frame.
• Remove the hog rings to separate the seatback trim and seatback pad.
3.
Remove the seatback silencer.
4.
Remove the seatback frame.
• Remove the pawls, and then remove outer hinge finisher.
• Remove the mounting bolts (inside, outside), and then remove seatback frame.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
JMJIA3133ZZ
JMJIA2940ZZ
PIIB4084J
: Pawl
JMJIA2942ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст