Nissan Cube. Manual — part 507
FOREWORD
This manual contains maintenance and repair procedure for the 2014
NISSAN CUBE.
In order to assure your safety and the efficient functioning of the vehicle,
this manual should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.
PLEASE HELP MAKE THIS SERVICE MANUAL BETTER!
Your comments are important to NISSAN and will help us to improve our Service Manuals.
Use this form to report any issues or comments you may have regarding our Service Manuals.
Please print this form and type or write your comments below. Mail or fax to:
Nissan North America, Inc.
Technical Service Information
39001 Sunrise Drive, P.O. Box 9200
Farmington Hills, MI USA 48331
FAX: (248) 488-3880
SERVICE MANUAL: Model:
Year:
PUBLICATION NO. (Refer to Quick Reference Index ):
Please describe any Service Manual issues or problems in detail:
Page number(s)
Note: Please include a copy of each page, marked with your comments.
Are the trouble diagnosis procedures logical and easy to use? (circle your answer)
YES
NO
If no, what page number(s)?
Note: Please include a copy of each page, marked with your comments.
Please describe the issue or problem in detail:
Is the organization of the manual clear and easy to follow? (circle your answer)
YES
NO
Please comment:
What information should be included in NISSAN Service Manuals to better support you in servicing or
repairing customer vehicles?
DATE:
YOUR NAME:
POSITION:
DEALER:
DEALER NO.:
ADDRESS:
CITY:
STATE/PROV./COUNTRY:
ZIP/POSTAL CODE:
QUICK REFERENCE CHART CUBE
QUICK REFERENCE CHART CUBE
PFP:00000
ENGINE TUNE-UP DATA (MR18DE)
ELS0003W
Engine model
MR18DE
Firing order
1-3-4-2
Idle speed
CVT (In “P or N” position)
M/T (In Neutral position)
rpm
700
±
50
Ignition timing
(BTDC at idle speed)
13
°
±
5
°
Tensions of drive belt
Belt tension is not necessary, as it is automatically adjusted
by drive belt auto-tensioner.
Radiater cap relief pressure
kPa (kg/cm
2
, psi)
Standard
78 - 98 (0.8 - 1.0, 11 - 14)
Limit
59 (0.6, 9)
Cooling system leakage testing pressure
kPa (kg/cm
2
, psi)
98 (1.0, 14)
Compression pressure
kPa (kg/cm
2
, psi)/250 rpm
Standard
1,500 (15.3, 217.5)
Minimum
1,200 (12.2, 174)
Differential limit between cylinders
100 (1.0, 14.5)
Spark plug
(Iridium-tipped type)
Make
DENSO
Standard type
FXE20HR11
Gap (Nominal) mm (in)
Standard
1.1 (0.043)
Limit
1.4 (0.055)
2014
QUICK REFERENCE CHART CUBE
FRONT WHEEL ALIGNMENT
ELS0003X
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
REAR WHEEL ALIGNMENT
ELS0003Y
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
BRAKE PEDAL
Unit: mm (in.)
Camber
Degree minute (Decimal degree)
Minimum
–0
°
55
′
(–0.92
°
)
Nominal
–0
°
10
′
(–0.17
°
)
Maximum
0
°
35
′
(0.58
°
)
Left and right difference
0
°
45
′
(0.75
°
)
Caster
Degree minute (Decimal degree)
Minimum
3
°
55
′
(3.92
°
)
Nominal
4
°
40
′
(4.67
°
)
Maximum
5
°
25
′
(5.41
°
)
Left and right difference
0
°
45
′
(0.75
°
)
Kingpin inclination
Degree minute (Decimal degree)
Minimum 9
°
10
′
(9.17
°
)
Nominal
9
°
55
′
(9.92
°
)
Maximum
10
°
40
′
(10.66
°
)
Toe-in
Total toe-in
Distance
Minimum
Out 1.0 mm (Out 0.03 in)
Nominal
In 1.0 mm (0.04 in)
Maximum
In 3.0 mm (0.11 in)
Total toe-angle
Degree minute (Decimal degree)
Minimum
Out 0
°
06
′
(Out 0.10
°
)
Nominal
In 0
°
06
′
(In 0.10
°
)
Maximum
In 0
°
17
′
(In 0.28
°
)
Camber
Degree minute (Decimal degree)
Minimum
–2
°
00
′
(–2.01
°
)
Nominal
–1
°
31
′
(–1.51
°
)
Maximum
–1
°
01
′
(–1.01
°
)
Toe-in
Total toe-in
Distance
Minimum
Out 1.0 mm (Out 0.039 in)
Nominal
In 3.0 mm (In 0.118 in)
Maximum
In 7.0 mm (In 0.275 in)
Total toe-angle
Degree minute (Decimal degree)
Minimum
Out 0
°
06
′
(Out 0.10
°
)
Nominal
In 0
°
17
′
(In 0.28
°
)
Maximum
In 0
°
39
′
(In 0.65
°
)
Brake pedal height
M/T
162.3 - 172.3 (6.39 - 6.78)
CVT
172.4 - 182.4 (6.79 - 7.18)
Depressed brake pedal height
[Depressing 490 N (50 kg, 110 lb) while turning the engine ON]
M/T
80 (3.15) or more
CVT
85 (3.35) or more
2014
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст