Nissan Cube. Manual — part 36
AV
ANTENNA BASE
AV-137
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ANTENNA BASE
Exploded View
INFOID:0000000009949645
Removal and Installation
INFOID:0000000009949646
REMOVAL
1.
Remove luggage side upper finisher. Refer to
2.
Remove assist grip and headlining clips. Refer to
3.
Pull headlining (rear). Obtain a service area.
4.
Remove antenna base mounting nut.
5.
Remove antenna base.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
If the antenna base mounting nut is tightened looser than the specified torque, then this will lower the
sensitivity of the antenna. On the other hand, if the nut is tightened tighter than the specified torque,
then this will deform the roof panel.
JPNIA1699GB
1.
Antenna rod
2.
Antenna base
for symbols in the figure.
AV-138
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
GPS ANTENNA
GPS ANTENNA
Removal and Installation
INFOID:0000000009949647
REMOVAL
1.
Remove instrument panel. Refer to
2.
Remove GPS antenna screw to remove GPS antenna.
INSTALLATION
Install in the reverse order of removal.
AV
TEL ADAPTER UNIT
AV-139
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TEL ADAPTER UNIT
Exploded View
INFOID:0000000009949648
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000009949649
REMOVAL
1.
Remove front floor spacer RH. Refer to
2.
Disconnect TEL adapter unit connector.
3.
Remove TEL adapter unit screws, then remove TEL adapter unit.
4.
Remove bracket screws, and then remove TEL adapter unit.
INSTALLATION
Install in the reverse order of removal.
JPNIA1702ZZ
1.
TEL adapter unit
JPNIA1703ZZ
1.
TEL adapter unit
2.
Bracket
AV-140
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
MICROPHONE
MICROPHONE
Exploded View
INFOID:0000000009949650
Removal and Installation
INFOID:0000000009949651
REMOVAL
1.
Remove front pillar garnish LH and center pillar upper garnish LH. Refer to
.
2.
Remove sunvisor assy, map lamp assy, assist grip LH, and inside mirror cover. Refer to
3.
Pull headlining (left front). Obtain a service area.
4.
Remove microphone connector and pawl to remove microphone.
INSTALLATION
Install in the reverse order of removal.
JPNIA1704ZZ
1.
Microphone
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст