Nissan Cube. Manual — part 66
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-113
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
AIR CONDITIONER
AIR CONDITIONER : CONSULT Function (BCM - AIR CONDITIONER) (Manual A/C)
INFOID:0000000010249127
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Display Item List
ACTIVE TEST
COMB SW
COMB SW : CONSULT Function (BCM - COMB SW)
INFOID:0000000009949775
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor item
[Unit]
Description
IGN ON SW
[On/Off]
Indicated [On/Off] condition of ignition switch in ON position
HAZARD SW
[On/Off]
The switch status input from the hazard switch
TURN SIGNAL R
[On/Off]
Each switch status that BCM detects from the combination switch reading function
TURN SIGNAL L
[On/Off]
Test item
Operation
Description
FLASHER
RH
Outputs the voltage to turn the right side turn signal lamps ON.
LH
Outputs the voltage to turn the left side turn signal lamps ON.
Off
Stops the voltage to turn the turn signal lamps OFF.
Monitor Item [Unit]
Contents
IGN SW
[On/Off]
Displays ignition switch position status as judged from ignition switch signal.
FAN ON SIG
[On/Off]
Displays the blower fan status as judged from fan switch signal.
AIR COND SW
[On/Off]
Displays [COMP (On)/COMP (Off)] status as judged from air conditioner switch signal.
THERMO AMP
[On/Off]
Displays the thermo control amp. status as judged from thermo control amp. signal.
FR DEF SW
[On/Off]
Displays the DEF status as judged from defroster position switch (mode switch) signal.
Test item
Operation
Description
A/C INDICATOR
On
A/C indicator is turned ON.
Off
A/C indicator is turned OFF.
BCS-114
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
BCM
BCM : CONSULT Function (BCM - BCM)
INFOID:0000000009949776
WORK SUPPORT
IMMU
IMMU : CONSULT Function (BCM - IMMU)
INFOID:0000000010249173
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor item [UNIT]
Description
TURN SIGNAL R
[Off/On]
Displays the status of TURN RH switch in combination switch judged by the combination switch reading func-
tion.
TURN SIGNAL L
[Off/On]
Displays the status of the TURN LH switch in combination switch judged by the combination switch reading
function.
HI BEAM SW
[Off/On]
Displays the status of HI BEAM switch in combination switch judged by the combination switch reading func-
tion.
HEAD LAMP SW 1
[Off/On]
Displays the status of HEADLAMP 1 switch in combination switch judged by the combination switch reading
function.
HEAD LAMP SW 2
[Off/On]
Displays the status of HEADLAMP 2 switch in combination switch judged by the combination switch reading
function.
TAIL LAMP SW
[Off/On]
Displays the status of TAIL LAMP switch in combination switch judged by the combination switch reading
function.
PASSING SW
[Off/On]
Displays the status of PASSING switch in combination switch judged by the combination switch reading func-
tion.
AUTO LIGHT SW
[Off/On]
NOTE:
The item is indicated, but not monitored.
FR FOG SW
[Off/On]
NOTE:
The item is indicated, but not monitored.
RR FOG SW
[Off/On]
NOTE:
The item is indicated, but not monitored.
FR WIPER HI
[Off/On]
Displays the status of FR WIPER HI switch in combination switch judged by the combination switch reading
function.
FR WIPER LOW
[Off/On]
Displays the status of FR WIPER LOW switch in combination switch judged by the combination switch read-
ing function.
FR WIPER INT
[Off/On]
Displays the status of FR WIPER INT switch in combination switch judged by the combination switch reading
function.
FR WASHER SW
[Off/On]
Displays the status of FR WASHER switch in combination switch judged by the combination switch reading
function.
INT VOLUME
[1 - 7]
Displays the status of wiper intermittent dial position judged by the combination switch reading function.
RR WIPER ON
[Off/On]
Displays the status of RR WIPER switch in combination switch judged by the combination switch reading
function.
RR WIPER INT
[Off/On]
Displays the status of RR WIPER INT switch in combination switch judged by the combination switch reading
function.
RR WASHER SW
[Off/On]
Displays the status of RR WASHER switch in combination switch judged by the combination switch reading
function.
Item
Description
RESET SETTING VALUE
Return a value set with WORK SUPPORT of each system to a default value in factory shipment.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-115
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
BATTERY SAVER
BATTERY SAVER : CONSULT Function (BCM - BATTERY SAVER)
INFOID:0000000010249182
WORK SUPPORT
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor item
Content
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
Test item
Description
THEFT IND
This test is able to check security indicator lamp operation [ON/OFF].
Service item
Setting item
Setting
ROOM LAMP TIMER SET
MODE 1
30 min.
Sets the interior room lamp battery saver timer operating
time.
NOTE:
The factor setting is 10 minutes. The setting cannot be re-
turned to the factory setting, when the setting is changed
once.
MODE 2
60 min.
MODE 3
15 min.
Monitor item
[Unit]
Description
IGN ON SW
[On/Off]
Indicated [On/Off] condition of ignition switch in ON position
ACC ON SW
[On/Off]
Indicated [On/Off] condition of ignition switch in ACC position
KEY ON SW
[On/Off]
Indicated [On/Off] condition of key switch
DOOR SW-DR
[On/Off]
Indicated [On/Off] condition of front door switch (driver side)
DOOR SW-AS
[On/Off]
Indicated [On/Off] condition of front door switch (passenger side)
DOOR SW-RR
[On/Off]
Indicated [On/Off] condition of rear door switch RH
DOOR SW- RL
[On/Off]
Indicated [On/Off] condition of rear door switch LH
BACK DOOR SW
[On/Off]
Indicated [On/Off] condition of back door switch
LOCK STATUS
[On/Off]
Indicated [On/Off] condition of driver side door
CDL LOCK SW
[On/Off]
Indicated [On/Off] condition of lock signal from door lock unlock switch
CDL UNLOCK SW
[On/Off]
Indicated [On/Off] condition of unlock signal from door lock unlock switch
KEYLESS LOCK
[On/Off]
Indicates [On/Off] condition of lock signal from keyfob
KEYLESS UNLOCK
[On/Off]
Indicates [On/Off] condition of unlock signal from keyfob
BCS-116
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
INFOID:0000000010249172
BCM CONSULT FUNCTION
CONSULT performs the following functions via CAN communication with BCM.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
THEFT ALM
THEFT ALM : CONSULT Function (BCM - THEFT ALM)
INFOID:0000000010249174
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
KEY CYL LK-SW
[On/Off]
Indicated [On/Off] condition of lock signal from door key cylinder
KEY CYL UN-SW
[On/Off]
Indicated [On/Off] condition of unlock signal from door key cylinder
TRNK/HAT MNTR
[On/Off]
NOTE:
This item is displayed, but cannot be tested
Monitor item
[Unit]
Description
Test item
Operation
Description
BATTERY SAVER
Off
Cuts the interior room lamp power supply.
On
Outputs the interior room lamp power supply.
Diagnosis mode
Function Description
DATA MONITOR
The BCM input/output signals are displayed.
Monitor Item
Contents
KEY ON SW
Indicates [On/Off] condition of key switch.
LOCK STATUS
NOTE:
This item is displayed, but cannot be monitored.
VEHICLE SPEED
Indicates [Km/h] condition of vehicle speed signal from combination meter.
IGN ON SW
Indicates [On/Off] condition of ignition switch.
TRNK OPNR SW
NOTE:
This item is displayed, but cannot be monitored.
KYLS TRNK/HAT
NOTE:
This item is displayed, but cannot be monitored.
Monitor Item
Condition
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
KEYLESS LOCK
Indicates [ON/OFF] condition of lock signal from keyfob.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст