Nissan Juke F15. Manual — part 1085
RF-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000012196955
Component Description
INFOID:0000000012196956
JMKIA5998ZZ
1.
Sunroof motor assembly
2.
Sunroof switch
3.
Combination meter
4.
SYSTEM : Component Parts Loca-
tion"
5.
Front door switch
A.
View with headlining removed
Component
Function
BCM
Supplies the power supply to sunroof motor assembly.
Combination meter
Transmits vehicle speed signal to sunroof motor assembly.
Front door switch
Detects door open/close condition and transmits to BCM.
Sunroof motor assembly
It is sunroof motor and CPU integrated type that enables tilt up/down & slide open/close by sun-
roof switch operation.
Sunroof switch
Transmits tilt up/down & slides open/close operation signal to sunroof motor assembly.
SYSTEM
RF-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
SYSTEM
System Diagram
INFOID:0000000012196957
SUNROOF
System Description
INFOID:0000000012196958
SUNROOF SYSTEM
• Sunroof motor assembly operates with the power supply that is output from BCM while ignition switch is ON
or retained power is operating.
• Tilt up/down & slide open/close signals from sunroof switch enables operate sunroof motor to move arbi-
trarily.
• Sunroof motor assembly receives a vehicle speed signal from combination meter and controls the sunroof
motor operation.
OPERATION DESCRIPTION
The sunroof operate to the following condition by the sunroof switch operation.
JMKIA5324GB
Sunroof position before operation
Switch operation
Sunroof action
Sunroof position after operation
Tilt up
A: Glass lid
B: Roof panel
Close
Not action
—
Open
Close
Fully-closed
JMKIA5777ZZ
JMKIA5869ZZ
RF-8
< SYSTEM DESCRIPTION >
SYSTEM
Tilt halfway-open
A: Glass lid
B: Roof panel
Close
Tilt up
Tilt up
Open
Close
Fully-closed
Fully-closed
A: Glass lid
B: Roof panel
Close
Tilt up
Tilt up
Open
Open
Fully-open
Halfway-open
A: Glass lid
B: Roof panel
Close
Close
Fully-closed
Open
Open
Fully-open
Fully-open
A: Glass lid
B: Roof panel
Close
Close
Fully-closed
Open
Not action
—
Sunroof position before operation
Switch operation
Sunroof action
Sunroof position after operation
JMKIA5778ZZ
JMKIA5870ZZ
JMKIA5869ZZ
JMKIA5779ZZ
JMKIA5870ZZ
JMKIA5871ZZ
JMKIA5780ZZ
JMKIA5872ZZ
JMKIA5871ZZ
JMKIA5781ZZ
JMKIA5872ZZ
SYSTEM
RF-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
AUTO OPERATION
Sunroof AUTO feature makes it possible to slide open and slide close or tilt up and tilt down the sunroof with-
out holding the sunroof switch in the slide open/tilt down or slide close/tilt up position.
RETAINED POWER OPERATION
Retained power operation is an additional power supply function that enables sunroof system to operate dur-
ing 45 seconds even when ignition switch is turned OFF.
RETAINED POWER FUNCTION CANCEL CONDITIONS
• Front door CLOSE (door switch OFF)
→OPEN (door switch ON).
• When ignition switch is ON again.
• When timer time passes. (45 seconds)
ANTI-PINCH FUNCTION
The CPU of sunroof motor assembly monitors the sunroof motor operation and the sunroof position (fully-
closed or other) by the signals from sunroof motor.
When sunroof motor detects an interruption during the following slide close and tilt down operation, sunroof
switch controls the motor for open and the sunroof will operate until full up position (when tilt down operate) or
150 mm (5.91 in) or more in an open direction (when slide close operate).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст