Nissan Juke F15. Manual — part 993
SQUEAK AND RATTLE TROUBLE DIAGNOSES
MIR-15
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
PIIB8742E
MIR-16
< REMOVAL AND INSTALLATION >
INSIDE MIRROR
REMOVAL AND INSTALLATION
INSIDE MIRROR
Exploded View
INFOID:0000000012201507
Removal and Installation
INFOID:0000000012201508
CAUTION:
Never reuse the inside mirror assembly disassembled from mirror base.
REMOVAL
Slide the inside mirror assembly upward to remove.
NOTE:
Insert flat-bladed screwdriver (A) under the inside mirror (1).
Slide the inside mirror to the upper side while pushing the pawl
downward.
CAUTION:
Never use excessive force to remove the inside mirror because
it is inserted tightly into the mirror base.
INSTALLATION
Install in the reverse order of removal.
1.
Windshield glass
2.
Mirror base
3.
Inside mirror assembly
: Always replace after every disassembly.
JMLIA0400ZZ
: Always replace after every disassembly.
JMLIA0055ZZ
OUTSIDE MIRROR
MIR-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
OUTSIDE MIRROR
Exploded View
INFOID:0000000012201509
DOOR MIRROR ASSEMBLY
DOOR MIRROR ASSEMBLY : Removal and Installation
INFOID:0000000012201510
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1.
Door mirror cover
2.
Side turn signal lamp
3.
Door mirror finisher
(without around view monitor sys-
tem)
4.
Door mirror actuator
5.
Glass mirror
6.
Door mirror corner cover
7.
Door mirror housing
8.
Side camera assembly
(with around view monitor system)
9.
Side camera finisher
(with around view monitor system)
: Clip
: Pawl
N·m (kg-m, in-lb)
JMLIA6142GB
MIR-18
< REMOVAL AND INSTALLATION >
OUTSIDE MIRROR
1. Disengage door mirror corner cover fixing clips using a remover
tool (A), and then remove door mirror corner cover.
2. Remove front door finisher. Refer to
INT-13, "Removal and Installation"
3. Disconnect door mirror harness connector.
4. Remove door mirror mounting nuts, and then remove door mirror assembly.
INSTALLATION
Install in the reverse order of removal.
DOOR MIRROR ASSEMBLY : Disassembly and Assembly
INFOID:0000000012201511
DISASSEMBLY
1. Remove door mirror assembly. Refer to
MIR-17, "DOOR MIRROR ASSEMBLY : Removal and Installa-
2. Remove glass mirror. Refer to
MIR-19, "GLASS MIRROR : Removal and Installation"
.
3. Remove door mirror actuator mounting bolts (A), and disconnect
harness connector (B), and then remove door mirror actuator.
4. Disengage door mirror cover and door mirror finisher (without around view monitor system) or side cam-
era finisher (with around view monitor system). Refer to
MIR-20, "DOOR MIRROR COVER : Removal and
.
5. Disconnect side camera harness connector (with around view monitor system).
6. Remove side camera bracket fixing screws (A), and then
remove side camera assembly from door mirror finisher. (with
around view monitor system)
7. Remove side turn signal lamp. Refer to the following.
• Xenon type: Refer to
EXL-104, "Removal and Installation"
• Halogen type: Refer to
EXL-215, "Removal and Installation"
ASSEMBLY
Note the following item, and then assemble in the reverse order of disassembly.
: Clip
JMLIA1391ZZ
JMLIA5685ZZ
JMLIA5689ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст