Nissan Juke F15. Manual — part 1341
TM-554
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
TCM
TCM
Exploded View
INFOID:0000000012201246
Removal and Installation
INFOID:0000000012201247
CAUTION:
• Never impact on TCM when removing or installing TCM.
• When replacing TCM, note the “CVTF DETERIORATION DATE” value displayed on CONSULT “CON-
FORM CVTF DETERIORTN” in MAINTENANCE BOOKLET, before start the operation.
• When replacing TCM and transaxle assembly simultaneously, replace transaxle assembly first and
then replace TCM.
• Before replacing TCM, perform “ADDITIONAL SERVICE WHEN REPLACING TCM”. Refer to
REMOVAL
1. Remove the battery. Refer to
PG-105, "Removal and Installation"
.
2. Remove air duct (inlet) and air cleaner case. Refer to
EM-192, "Removal and Installation"
.
3. Disconnect the TCM connector.
4. Remove the TCM.
5. Remove the bracket.
INSTALLATION
Installation is in the reverse order of removal.
Adjustment
INFOID:0000000012201248
ADJUSTMENT AFTER INSTALLATION
When replaced TCM, perform "ADDITIONAL SERVICE WHEN REPLACING TCM". Refer to
.
1.
Bracket
2.
TCM
:Vehicle front
: N·m (kg-m, in-lb)
JSDIA7186GB
AIR BREATHER HOSE
TM-555
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
AIR BREATHER HOSE
Exploded View
INFOID:0000000012201249
Removal and Installation
INFOID:0000000012201250
REMOVAL
1. Remove air cleaner case. Refer to
EM-192, "Removal and Installation"
.
2. Remove clip of air breather hose from harness bracket.
3. Remove air breather hose from transaxle assembly.
INSTALLATION
Note the followings and installation is in the reverse order of removal.
CAUTION:
• Never bend the air breather hose to prevent damage to the hose.
• Insert air breather hose (1) to air breather tube (A) all the way
to the curve of the tube.
• Insert air breather hose to air breather tube so that the paint
mark (B) is facing upward.
1.
Air breather hose
2.
Clip
3.
Transaxle assembly
4.
Air breather tube
5.
Harness bracket
: Vehicle front
: Always replace after every disassembly.
JSDIA6058ZZ
JSDIA2399ZZ
TM-556
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
AIR BREATHER HOSE
• Never reuse clip (A).
• Securely install the clip to the harness bracket.
JSDIA2458ZZ
OIL PAN
TM-557
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
OIL PAN
Exploded View
INFOID:0000000012201251
Removal and Installation
INFOID:0000000012201252
REMOVAL
1. Remove drain plug from oil pan and then drain the CVT fluid.
Transaxle assembly
Oil pan gasket
Magnet
Oil pan
Drain plug
Drain plug gasket
Overflow plug
O-ring
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Apply CVT fluid
JSDIA7928GB
JSDIA5205ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст