Nissan Juke F15. Manual — part 908
INT-36
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
CAUTION:
When installing luggage side lower finisher, check that clips are securely in body panel holes, and
press them in.
Removal and Installation of Shock Absorber Mask
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1. Disengage shock absorber mask fixing pawls with a remover
tool (A), and then remove shock absorber mask.
CAUTION:
Apply protective tape (B) on the parts to protect it from
damage.
INSTALLATION
Install in the reverse order of removal.
Removal and Installation of Luggage Side Lower Finisher Grille
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
Disengage luggage side lower finisher grille fixing pawls with a
remover tool (A), and then remove luggage side lower finisher grille.
CAUTION:
Apply protective tape (B) on the parts to protect it from damage.
INSTALLATION
Install in the reverse order of removal.
LUGGAGE SIDE UPPER FINISHER
LUGGAGE SIDE UPPER FINISHER : Removal and Installation
INFOID:0000000012199188
REMOVAL
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the body.
1. Remove luggage side lower finisher. Refer to
INT-35, "LUGGAGE SIDE LOWER FINISHER : Removal
2. Remove rear seat belt (floor) anchor bolt. Refer to
SB-13, "SEAT BELT RETRACTOR : Removal and
.
: Pawl
JMJIA4407ZZ
: Pawl
JMJIA4408ZZ
LUGGAGE FLOOR TRIM
INT-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
3. Disengage luggage side upper finisher fixing clips and metal
clips with a remover tool (A), and then remove luggage side
upper finisher.
INSTALATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing luggage side upper finisher, check that clips, and metal clips are securely in body
panel holes, and press them in.
: Clip
: Metal clip
JMJIA4406ZZ
INT-38
< REMOVAL AND INSTALLATION >
BACK DOOR TRIM
BACK DOOR TRIM
Exploded View
INFOID:0000000012199189
BACK DOOR PULL HANDLE
BACK DOOR PULL HANDLE : Removal and Installation
INFOID:0000000012199190
REMOVAL
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the back door panel.
1. Fully open back door.
1.
Back door side finisher RH
2.
Rear parcel shelf finisher
3.
Back door side finisher LH
4.
Back door lower finisher
5.
Emergency lid
6.
Back door pull handle
: Clip
: Pawl
JMJIA4537ZZ
BACK DOOR TRIM
INT-39
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
2. Disengage back door pull handle fixing pawls with a remover
tool (A), and then remove back door pull handle.
INSTALATION
Install in the reverse order of removal.
BACK DOOR LOWER FINISHER
BACK DOOR LOWER FINISHER : Removal and Installation
INFOID:0000000012199191
REMOVAL
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the back door panel.
1. Fully open back door.
2. Remove rear parcel shelf finisher. (Models with rear parcel shelf finisher)
3. Disengage back door lower finisher fixing clips with a remover
tool (A), and then remove back door lower finisher.
INATALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing back door lower finisher, check that clips are securely in back door panel holes, and
press them in.
BACK DOOR SIDE FINISHER
BACK DOOR SIDE FINISHER : Removal and Installation
INFOID:0000000012199192
REMOVAL
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the back door panel.
1. Fully open back door.
2. Remove back door lower finisher. Refer to
INT-39, "BACK DOOR LOWER FINISHER : Removal and
.
: Pawl
JMJIA4411ZZ
: Clip
JMJIA4409ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст