Nissan Primera P12. Manual — part 592
LT-78
PARKING, LICENSE PLATE AND TAIL LAMPS
Bulb Replacement
EKS009NF
PARKING AND TAIL LAMPS
Refer to
LT-92, "REAR COMBINATION LAMP"
.
LICENSE PLATE LAMP
1.
Remove the lens using a clip driver or a suitable tool.
2.
Remove the bulb from its socket.
Removal and Installation
EKS009NG
PARKING AND TAIL LAMPS
Refer to
LT-92, "REAR COMBINATION LAMP"
.
LICENSE PLATE LAMP
Removal (Sedan and Hatchback)
1.
Remove the license lamp finisher. Refer to EI section in P12
ESM (SM2E00-1P12E0E) .
2.
Remove the harness from installation pawl for harness.
3.
Push license plate lamp mounting hook.
4.
Pull out license plate lamp from finisher.
Installation
●
Install license plate lamp in the reverse order of removal.
License plate lamp
: 12V - 5W
MKIB0123E
MKIA0052E
MKIA0051E
PARKING, LICENSE PLATE AND TAIL LAMPS
LT-79
C
D
E
F
G
H
I
J
L
M
A
B
LT
Removal (Wagon)
1.
Remove the license lamp finisher. Refer to EI section in P12
ESM (SM2E00-1P12E0E).
2.
Remove the harness from installation pawl for harness.
3.
Push license plate lamp mounting hook.
4.
Pull out license plate lamp from finisher.
Installation
●
Install license plate lamp in the reverse order of removal.
MKIA0053E
MKIA0051E
LT-80
FRONT FOG LAMP
FRONT FOG LAMP
PFP:00011
System Description
EKS009NH
DESCRIPTION
Power is supplied at all times to fog lamp relay terminal 3
●
through 15A fuse (No. 43, located in the fuse and fusible link box).
With the lighting switch in the 1ST or 2ND position and LOW (“B”) position, power is supplied
●
to lighting switch terminal 11
●
through 10A fuse (No. 32, located in the fuse and fusible link box).
●
to fog lamp switch terminal 32
●
through terminal 12 of the lighting switch.
●
to fog lamp relay terminal 2
●
through the fog lamp switch and body grounds E10 and E58.
FOG LAMP OPERATION
The fog lamp switch is built into the combination switch. The lighting switch must be in the 1st or 2nd position
and LOW (“B”) position for fog lamp operation.
With the fog lamp switch in the ON position,
Power is supplied
●
to front fog lamp relay terminal 2
●
through fog lamp switch terminal 31.
The fog lamp relay is energized and power is supplied
●
from fog lamp relay terminal 5
●
to terminal 1 of each fog lamp, and
●
to combination meter terminal 6 (LHD models) or 19 (RHD models) for the FRONT FOG indicator.
Ground is supplied to terminals 24, 25 and 45 (LHD models) or 11, 12 and 32 (RHD models) to the combina-
tion meter through body grounds M16, M50 and M70.
Ground is supplied to terminal 2 of each front fog lamp through body grounds E10 and E58.
With power and ground supplied, the front fog lamps and the front fog indicator illuminate.
FRONT FOG LAMP
LT-81
C
D
E
F
G
H
I
J
L
M
A
B
LT
Wiring Diagram — F/FOG —
EKS009NI
MKWA1112E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст