Nissan Primera P12. Manual — part 99
MULTI-REMOTE CONTROL SYSTEM
BL-105
C
D
E
F
G
H
J
K
L
M
A
B
BL
REMOTE CONTROLLER ID SET UP WITHOUT CONSULT- II
SEL497X
BL-106
MULTI-REMOTE CONTROL SYSTEM
Remote Controller Battery Replacement
EIS005I4
SEL241X
FRONT DOOR LOCK
BL-107
C
D
E
F
G
H
J
K
L
M
A
B
BL
FRONT DOOR LOCK
PFP:80502
Component Parts
EIS005I5
Removal and Installation
EIS005I6
REMOVAL
1.
Remove door finisher. Refer to EI section in P12 ESM (SM2E00-1P12E0E).
2.
Remove front door glass. Refer to
GW-64, "FRONT DOOR GLASS AND REGULATOR"
.
3.
Remove front door module assembly. Refer to
GW-64, "FRONT DOOR GLASS AND REGULATOR"
.
4.
Disconnect inside release cable at the joint.
5.
Remove front door lock key cylinder assembly mount screw.
6.
Remove front door lock key cylinder cap (driver side).
1
: Fixing bracket
2
: Key cylinder (Driver side)
3
: Door outside handle grip
4
: Door outside handle bracket
5
: Door lock assembly
6
: Inside handle release cable
7
: Outside handle release cable
PIIA0823E
PIIA0825E
PIIA0828E
BL-108
FRONT DOOR LOCK
7.
Working through the access hole, disconnect outside handle
release cable (on the handle) at the joint.
8.
Remove outside handle grip.
9.
Remove outside handle bracket and front door lock key cylinder.
10. Disconnect door lock actuator connector.
11. Remove mount screw and remove door lock assembly through
the access hole.
INSTALLATION
Install in the reverse order of removal.
NOTE:
●
Install the outside handle by pressing it forward and downward while tightening the bolts.
PIIA0824E
PIIA0826E
PIIA0829E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст