Nissan Juke (2016 year). Service Repair Manual — part 35
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-37
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
RETAIND PWR : CONSULT Function (BCM - RETAINED PWR)
INFOID:0000000012965019
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)
INFOID:0000000012200716
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
ACTIVE TEST
AIR PRESSURE MONITOR
AIR PRESSURE MONITOR : CONSULT Function (BCM - AIR PRESSURE MONI-
TOR)
INFOID:0000000012965037
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SELF DIAGNOSTIC RESULT
DATA MONITOR MODE
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor Item
Description
DOOR SW-DR
Indicates [ON/OFF] condition of driver side door switch.
DOOR SW-AS
Indicates [ON/OFF] condition of passenger side door switch.
Monitor item [UNIT]
Description
PUSH SW
[Off/On]
Displays the status of the push-button ignition switch (push switch) judged by BCM.
Test item
Opera-
tion
Description
OIL PRESSURE SW
Off
NOTE:
This item is indicated, but not tested.
On
Diagnosis mode
Function Description
Self Diagnostic Result
Displays the diagnosis results judged by BCM.
Data Monitor
The BCM input/output signals are displayed.
Active Test
The signals used to activate each device are forcibly supplied from BCM.
Work Support
Components can be quickly and accurately adjusted.
Revision: November 2015
2016 JUKE
BCS-38
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST MODE
NOTE:
After completing the work below, perform an active test.
1. Check ID registration state and perform self-diagnosis.
2. Erase the self-diagnosis result history.
WORK SUPPORT
Monitor item (Unit)
Remarks
AIR PRESS FL
(kPa, kg/cm2 or Psi)
Tire pressure
AIR PRESS FR
(kPa, kg/cm2 or Psi)
AIR PRESS RR
(kPa, kg/cm2 or Psi)
AIR PRESS RL
(kPa, kg/cm2 or Psi)
ID REGST FL1
(Yet, Done)
Registration ID
ID REGST FR1
(Yet, Done)
ID REGST RR1
(Yet, Done)
ID REGST RL1
(Yet, Done)
WARNING LAMP
(On/Off)
Low tire pressure warning lamp
BUZZER
(On/Off)
NOTE:
This item is displayed, but cannot be use this item.
Item
Description
WARNING LAMP
Low tire pressure warning lamp can be turned ON arbitrarily.
ID REGIST WARNING
NOTE:
Displayed but not used in TPMS.
RUN FLAT TIRE W/L
NOTE:
Displayed but not used in TPMS.
RUN FLAT/T WARN BUZZER
NOTE:
Displayed but not used in TPMS.
FLASHER
Turn signal lamps can be turned ON arbitrarily.
HORN
This test is able to check to check that the horn sounds.
Item
Description
ID READ
Registered tire pressure sensor ID can be displayed.
ID REGIST
Tire pressure sensor ID can be registered.
Revision: November 2015
2016 JUKE
BCS
BCM
BCS-39
< ECU DIAGNOSIS INFORMATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ECU DIAGNOSIS INFORMATION
BCM
Reference Value
INFOID:0000000012200718
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
CONSULT MONITOR ITEM
Monitor Item
Condition
Value/Status
FR WIPER HI
Other than front wiper switch HI
Off
Front wiper switch HI
On
FR WIPER LOW
Other than front wiper switch LO
Off
Front wiper switch LO
On
FR WASHER SW
Front washer switch OFF
Off
Front washer switch ON
On
FR WIPER INT
Other than front wiper switch INT
Off
Front wiper switch INT
On
FR WIPER STOP
Front wiper is not in STOP position
Off
Front wiper is in STOP position
On
INT VOLUME
Wiper intermittent dial is in a dial position 1 - 7
Wiper intermittent dial
position
RR WIPER ON
Other than rear wiper switch ON
Off
Rear wiper switch ON
On
RR WIPER INT
Other than rear wiper switch INT
Off
Rear wiper switch INT
On
RR WASHER SW
Rear washer switch OFF
Off
Rear washer switch ON
On
RR WIPER STOP
Rear wiper is in STOP position
Off
Rear wiper is not in STOP position
On
TURN SIGNAL R
Other than turn signal switch RH
Off
Turn signal switch RH
On
TURN SIGNAL L
Other than turn signal switch LH
Off
Turn signal switch LH
On
TAIL LAMP SW
Other than lighting switch 1ST and 2ND
Off
Lighting switch 1ST or 2ND
On
HI BEAM SW
Other than lighting switch HI
Off
Lighting switch HI
On
HEAD LAMP SW 1
Other than lighting switch 2ND
Off
Lighting switch 2ND
On
HEAD LAMP SW 2
Other than lighting switch 2ND
Off
Lighting switch 2ND
On
PASSING SW
Other than lighting switch PASS
Off
Lighting switch PASS
On
AUTO LIGHT SW
Other than lighting switch AUTO
Off
Lighting switch AUTO
On
Revision: November 2015
2016 JUKE
BCS-40
< ECU DIAGNOSIS INFORMATION >
[WITH INTELLIGENT KEY SYSTEM]
BCM
FR FOG SW
Front fog lamp switch OFF
Off
Front fog lamp switch ON
On
DOOR SW-DR
Driver door closed
Off
Driver door opened
On
DOOR SW-AS
Passenger door closed
Off
Passenger door opened
On
DOOR SW-RR
Rear RH door closed
Off
Rear RH door opened
On
DOOR SW-RL
Rear LH door closed
Off
Rear LH door opened
On
DOOR SW-BK
Back door closed
Off
Back door opened
On
CDL LOCK SW
Other than power door lock switch LOCK
Off
Power door lock switch LOCK
On
CDL UNLOCK SW
Other than power door lock switch UNLOCK
Off
Power door lock switch UNLOCK
On
KEY CYL LK-SW
Other than driver door key cylinder LOCK position
Off
Driver door key cylinder LOCK position
On
KEY CYL UN-SW
Other than driver door key cylinder UNLOCK position
Off
Driver door key cylinder UNLOCK position
On
HAZARD SW
Hazard switch is OFF
Off
Hazard switch is ON
On
REAR DEF SW
Rear window defogger switch OFF
Off
Rear window defogger switch ON
On
TR/BD OPEN SW
Back door opener switch OFF
Off
While the back door opener switch is turned ON
On
TRNK/HAT MNTR
NOTE:
The item is indicated, but not monitored.
Off
FAN ON SIG
Blower fan OFF
Off
Blower fan ON
On
AIR COND SW
Air conditioner OFF (A/C switch indicator OFF)
Off
Air conditioner ON (A/C switch indicator ON)
On
RKE-LOCK
LOCK button of the key is not pressed
Off
LOCK button of the key is pressed
On
RKE-UNLOCK
UNLOCK button of the key is not pressed
Off
UNLOCK button of the key is pressed
On
RKE-TR/BD
NOTE:
The item is indicated, but not monitored.
Off
RKE-PANIC
PANIC button of the key is not pressed
Off
PANIC button of the key is pressed
On
RKE-MODE CHG
LOCK/UNLOCK button of the key is not pressed and held simultaneously
Off
LOCK/UNLOCK button of the key is pressed and held simultaneously
On
OPTI SEN (DTCT)
Bright outside of the vehicle
Close to 5 V
Dark outside of the vehicle
Close to 0 V
Monitor Item
Condition
Value/Status
Revision: November 2015
2016 JUKE
BCS
BCM
BCS-41
< ECU DIAGNOSIS INFORMATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
OPTI SEN (FILT)
Bright outside of the vehicle (Lighting switch AUTO)
Close to 5 V
Dark outside of the vehicle (Lighting switch AUTO)
Close to 1.50 V
OPTICAL SENSOR
NOTE:
The item is indicated, but not monitored.
Off
RAIN SENSOR
NOTE:
The item is indicated, but not monitored.
Off
REQ SW -DR
Driver door request switch is not pressed
Off
Driver door request switch is pressed
On
REQ SW -AS
Passenger door request switch is not pressed
Off
Passenger door request switch is pressed
On
REQ SW -RR
NOTE:
The item is indicated, but not monitored.
Off
REQ SW -RL
NOTE:
The item is indicated, but not monitored.
Off
REQ SW -BD/TR
Back door request switch is not pressed
Off
Back door request switch is pressed
On
PUSH SW
Push-button ignition switch (push switch) is not pressed
Off
Push-button ignition switch (push switch) is pressed
On
CLUCH SW
The clutch pedal is not depressed.
Off
The clutch pedal is depressed
On
BRAKE SW 1
The brake pedal is not depressed
Off
The brake pedal is depressed
On
BRAKE SW 2
The brake pedal is depressed when No. 38 fuse is blown
Off
The brake pedal is not depressed when No. 38 fuse is blown, or No. 38
fuse is normal
On
DETE/CANCL SW
NOTE:
For M/T models this item is not
used.
Selector lever in P position
Release selector button
Off
Push selector button
On
Selector lever in any position other than P
SFT PN/N SW
• Selector lever in any position other than P and N (CVT models)
• Control lever in any position other than neutral (M/T models)
Off
• Selector lever in P or N position (CVT models)
• Control lever in neutral position (M/T models)
On
S/L -LOCK
NOTE:
The item is indicated, but not monitored.
Off
S/L -UNLOCK
NOTE:
The item is indicated, but not monitored.
Off
S/L RELAY-F/B
NOTE:
The item is indicated, but not monitored.
Off
UNLK SEN -DR
Driver door is locked
Off
Driver door is unlocked
On
PUSH SW -IPDM
Push-button ignition switch (push-switch) is not pressed
Off
Push-button ignition switch (push-switch) is pressed
On
IGN RLY1 -F/B
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
DETE SW -IPDM
NOTE:
For M/T models this item is not
used.
Selector lever in any position other than P
Off
Selector lever in P position
Push selector button
Release selector button
On
Monitor Item
Condition
Value/Status
Revision: November 2015
2016 JUKE
BCS-42
< ECU DIAGNOSIS INFORMATION >
[WITH INTELLIGENT KEY SYSTEM]
BCM
SFT PN -IPDM
NOTE:
For M/T models this item is not
used.
Selector lever in any position other than P and N
Off
Selector lever in P or N position
On
SFT P -MET
NOTE:
For M/T models this item is not
used.
Selector lever in any position other than P
Off
Selector lever in P position
On
SFT N -MET
NOTE:
For M/T models this item is not
used.
Selector lever in any position other than N
Off
Selector lever in N position
On
ENGINE STATE
Engine stopped
Stop
While the engine stalls
Stall
At engine cranking
Crank
Engine running
Run
S/L LOCK-IPDM
NOTE:
The item is indicated, but not monitored.
Off
S/L UNLK-IPDM
NOTE:
The item is indicated, but not monitored.
Off
S/L RELAY-REQ
NOTE:
The item is indicated, but not monitored.
Off
VEH SPEED 1
While driving
Equivalent to speed-
ometer reading
VEH SPEED 2
While driving
Equivalent to speed-
ometer reading
DOOR STAT-DR
Driver door is locked
LOCK
Wait with selective unlock operation (60 seconds)
READY
Driver door is unlocked
UNLOCK
DOOR STAT-AS
Passenger door is locked
LOCK
Wait with selective unlock operation (60 seconds)
READY
Passenger door is unlocked
UNLOCK
ID OK FLAG
Driver side door is open after ignition switch is turned OFF
(Shift position is in the P position)
Reset
Ignition switch ON
Set
PRMT ENG STRT
The engine start is prohibited
Reset
The engine start is permitted
Set
PRMT RKE STRT
NOTE:
The item is indicated, but not monitored.
Reset
RKE OPE COUN1
During the operation of the key
Operation frequency
of the key
RKE OPE COUN2
NOTE:
The item is indicated, but not monitored.
—
CONFRM ID ALL
The key ID that the key slot receives is not recognized by any key ID reg-
istered to BCM.
Yet
The key ID that the key slot receives is recognized by any key ID regis-
tered to BCM.
Done
CONFIRM ID4
The key ID that the key slot receives is not recognized by the fourth key ID
registered to BCM.
Yet
The key ID that the key slot receives is recognized by the fourth key ID reg-
istered to BCM.
Done
Monitor Item
Condition
Value/Status
Revision: November 2015
2016 JUKE
BCS
BCM
BCS-43
< ECU DIAGNOSIS INFORMATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
CONFIRM ID3
The key ID that the key slot receives is not recognized by the third key ID
registered to BCM.
Yet
The key ID that the key slot receives is recognized by the third key ID reg-
istered to BCM.
Done
CONFIRM ID2
The key ID that the key slot receives is not recognized by the second key
ID registered to BCM.
Yet
The key ID that the key slot receives is recognized by the second key ID
registered to BCM.
Done
CONFIRM ID1
The key ID that the key slot receives is not recognized by the first key ID
registered to BCM.
Yet
The key ID that the key slot receives is recognized by the first key ID reg-
istered to BCM.
Done
NOT REGISTERED
BCM detects registered key ID, or BCM does not detect key ID.
ID OK
BCM detects non-registration key ID.
ID NG
TP 4
The ID of fourth key is not registered to BCM
Yet
The ID of fourth key is registered to BCM
Done
TP 3
The ID of third key is not registered to BCM
Yet
The ID of third key is registered to BCM
Done
TP 2
The ID of second key is not registered to BCM
Yet
The ID of second key is registered to BCM
Done
TP 1
The ID of first key is not registered to BCM
Yet
The ID of first key is registered to BCM
Done
AIR PRESS FL
Ignition switch ON (Only when the signal from the transmitter is received)
Air pressure of front
LH tire
AIR PRESS FR
Ignition switch ON (Only when the signal from the transmitter is received)
Air pressure of front
RH tire
AIR PRESS RR
Ignition switch ON (Only when the signal from the transmitter is received)
Air pressure of rear
RH tire
AIR PRESS RL
Ignition switch ON (Only when the signal from the transmitter is received)
Air pressure of rear
LH tire
ID REGST FL1
ID of front LH tire transmitter is registered
Done
ID of front LH tire transmitter is not registered
Yet
ID REGST FR1
ID of front RH tire transmitter is registered
Done
ID of front RH tire transmitter is not registered
Yet
ID REGST RR1
ID of rear RH tire transmitter is registered
Done
ID of rear RH tire transmitter is not registered
Yet
ID REGST RL1
ID of rear LH tire transmitter is registered
Done
ID of rear LH tire transmitter is not registered
Yet
WARNING LAMP
Tire pressure indicator OFF
Off
Tire pressure indicator ON
On
BUZZER
Tire pressure warning alarm is not sounding
Off
Tire pressure warning alarm is sounding
On
Monitor Item
Condition
Value/Status
Revision: November 2015
2016 JUKE
BCS-44
< ECU DIAGNOSIS INFORMATION >
[WITH INTELLIGENT KEY SYSTEM]
BCM
TERMINAL LAYOUT
PHYSICAL VALUES
JMMIA0323ZZ
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст