Nissan Juke (2016 year). Service Repair Manual — part 690
DIAGNOSIS SYSTEM (IPDM E/R)
WW-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
ACTIVE TEST
Test item
IGN RLY
[Off/On]
×
Displays the status of the ignition relay judged by IPDM E/R.
PUSH SW
[Off/On]
Displays the status of the push-button ignition switch judged by IPDM E/R.
INTER/NP SW
[Off/On]
Displays the status of the ignition power supply (M/T models) or shift position (CVT
models) judged by IPDM E/R.
ST RLY CONT
[Off/On]
Displays the status of the starter relay status signal received from BCM via CAN com-
munication.
IHBT RLY -REQ
[Off/On]
Displays the status of the starter control relay signal received from BCM via CAN com-
munication.
ST/INHI RLY
[Off/ ST ON/INHI ON/UNKWN]
Displays the status of the starter relay and starter control relay judged by IPDM E/R.
DETENT SW
[Off/On]
Displays the status of the CVT shift selector (detention switch) judged by IPDM E/R.
S/L RLY -REQ
[Off/On]
NOTE:
This item is indicated, but not monitored.
S/L STATE
[LOCK/UNLK/UNKWN]
NOTE:
This item is indicated, but not monitored.
DTRL REQ
[Off/On]
Displays the status of the daytime running light request signal received from BCM via
CAN communication.
NOTE:
This item is monitored only for the except for NISMO models.
OIL P SW
[Open/Close]
NOTE:
This item is indicated, but not monitored.
HOOD SW
[Off/On]
NOTE:
This item is indicated, but not monitored.
HL WASHER REQ
[Off/On]
NOTE:
This item is indicated, but not monitored.
THFT HRN REQ
[Off/On]
Displays the status of the theft warning horn request signal received from BCM via
CAN communication.
HORN CHIRP
[Off/On]
Displays the status of the horn reminder request signal received from BCM via CAN
communication.
Monitor Item
[Unit]
MAIN
SIGNALS
Description
Test item
Operation
Description
HORN
On
Operates horn relay for 20 ms.
REAR DEFOGGER
Off
OFF
On
Operates the rear window defogger relay.
FRONT WIPER
Off
OFF
Lo
Operates the front wiper relay.
Hi
Operates the front wiper relay and front wiper high relay.
MOTOR FAN
1
OFF
2
Transmits 50% pulse duty signal (PWM signal) to the cooling fan control module.
3
Transmits 75% pulse duty signal (PWM signal) to the cooling fan control module.
4
Transmits 100% pulse duty signal (PWM signal) to the cooling fan control module.
HEAD LAMP WASHER
On
NOTE:
This item is indicated, but cannot be tested.
Revision: November 2015
2016 JUKE
WW-20
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (IPDM E/R)
EXTERNAL LAMPS
Off
OFF
TAIL
Operates the tail lamp relay.
Lo
Operates the headlamp low relay.
Hi
Operates the headlamp low relay and ON/OFF the headlamp high relay at 1 second
intervals.
Fog
Operates the front fog lamp relay.
Test item
Operation
Description
Revision: November 2015
2016 JUKE
BCM, IPDM E/R
WW-21
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
ECU DIAGNOSIS INFORMATION
BCM, IPDM E/R
List of ECU Reference
INFOID:0000000012197049
ECU
Reference
BCM
BCS-61, "DTC Inspection Priority Chart"
IPDM E/R
Revision: November 2015
2016 JUKE
WW-22
< WIRING DIAGRAM >
WIPER AND WASHER SYSTEM
WIRING DIAGRAM
WIPER AND WASHER SYSTEM
Wiring Diagram - WIPER AND WASHER SYSTEM -
INFOID:0000000012197050
JRLWF5345GB
Revision: November 2015
2016 JUKE
WIPER AND WASHER SYSTEM
WW-23
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
JRLWF5346GB
Revision: November 2015
2016 JUKE
WW-24
< WIRING DIAGRAM >
WIPER AND WASHER SYSTEM
JRLWF5347GB
Revision: November 2015
2016 JUKE
WIPER AND WASHER SYSTEM
WW-25
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
JRLWF5348GB
Revision: November 2015
2016 JUKE
WW-26
< WIRING DIAGRAM >
WIPER AND WASHER SYSTEM
JRLWF5349GB
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст