Nissan Juke (2016 year). Service Repair Manual — part 20
AV-148
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
U1258 SATELLITE RADIO ANTENNA
U1258 SATELLITE RADIO ANTENNA
DTC Logic
INFOID:0000000012202554
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000012202555
Regarding Wiring Diagram information, refer to
1.
SATELLITE ANTENNA INSPECTION
Visually inspect the satellite antenna and antenna feeder. Refer to
.
Is inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace malfunctioning components.
2.
CHECK NAVI CONTROL UNIT VOLTAGE
1. Turn ignition switch ON.
2. Disconnect NAVI control unit harness connector.
3. Check voltage between NAVI control unit connector and ground.
Is inspection result normal?
YES
>> Replace satellite radio antenna. Refer to
AV-187, "Removal and Installation"
NO
>> Replace NAVI control unit. Refer to
AV-182, "Removal and Installation"
CONSULT Display
DTC Detection Condition
Possible Cause
SXM ANTENNA CONN
[U1258]
Open or short to ground is detected in satellite
antenna connection.
• Satellite antenna disconnection.
• Open or short to ground in satellite antenna
signal circuit.
NAVI control unit
Ground
Voltage
Terminal
73
—
5.0 V
Revision: November 2015
2016 JUKE
AV
U1263 USB
AV-149
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U1263 USB
DTC Logic
INFOID:0000000012202556
Diagnosis Procedure
INFOID:0000000012202557
1.
CHECK USB HARNESS
Visually check USB harness.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace USB harness.
2.
CHECK USB CONNECTOR.
Visually check USB connector.
Is the inspection result normal?
YES
>> Replace NAVI control unit. Refer to
AV-182, "Removal and Installation"
NO
>> Replace USB connector and AUX jack. Refer to
AV-196, "Removal and Installation"
.
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible cause
U1263
USB OVERCURRENT
(USB over current error)
Detection of overcurrent in USB connector.
• USB harness between the NAVI con-
trol unit
• USB connector
Revision: November 2015
2016 JUKE
AV-150
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
U1264 AMP.
U1264 AMP.
DTC Logic
INFOID:0000000012202558
Diagnosis Procedure
INFOID:0000000012202559
1.
CHECK CONTINUITY BETWEEN NAVI CONTROL UNIT AND ANTENNA BASE
1. Turn ignition switch OFF.
2. Disconnect antenna base connector and NAVI control unit connector.
3. Check continuity between NAVI control unit harness connector and antenna base harness connector.
4. Check continuity between NAVI control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK VOLTAGE NAVI CONTROL UNIT
1. Connect NAVI control unit connector.
2. Turn ignition switch ON.
3. Check voltage between NAVI control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace antenna base. Refer to
AV-187, "Removal and Installation"
.
NO
>> Replace NAVI control unit. Refer to
AV-182, "Removal and Installation"
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible cause
U1264
• ANTENNA AMP TERMI-
NAL OPEN
(Antenna amp terminal
Open)
• ANTENNA AMP TERMI-
NAL SHORT
(Antenna amp terminal
Short)
Antenna amp. ON circuit is open or shorted.
Check antenna amp. ON signal circuit
between the NAVI control unit and an-
tenna base.
NAVI control unit
Antenna base
Continuity
Connector
Terminals
Connector
Terminals
M316
70
M310
1
Existed
NAVI control unit
Ground
Continuity
Connector
Terminals
M316
70
Not existed
NAVI control unit
(–)
Voltage
(Approx.)
Connector
Terminals
M316
70
Ground
12.0 V
Revision: November 2015
2016 JUKE
AV
U12AA CONFIGURATION ERROR
AV-151
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U12AA CONFIGURATION ERROR
DTC Logic
INFOID:0000000012202560
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible cause
U12AA
CONFIGURATION ERROR
(Configuration Error)
NAVI control unit is not properly configured or
configuration is not recognized.
Perform configuration of NAVI control
unit with CONSULT.
Revision: November 2015
2016 JUKE
AV-152
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
U12AB ANTENNA
U12AB ANTENNA
DTC Logic
INFOID:0000000012202561
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000012202562
1.
WINDOW ANTENNA INSPECTION
Visually inspect the window antenna and antenna feeder. Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace malfunctioning part.
2.
CHECK CONTINUITY BETWEEN NAVI CONTROL UNIT AND ANTENNA BASE
1. Turn ignition switch OFF.
2. Disconnect antenna base connector and NAVI control unit connector.
3. Check continuity between NAVI control unit harness connector and antenna base harness connector.
4. Check continuity between NAVI control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace NAVI control unit. Refer to
AV-182, "Removal and Installation"
NO
>> Repair harness or connector.
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible cause
U12AB
FM ANTENNA ERROR
(Frequency modulation an-
tenna error)
FM antenna connection error is detected.
• FM antenna feeder connection
• FM antenna feeder
NAVI control unit
Antenna base
Continuity
Connector
Terminals
Connector
Terminals
M316
71
M310
2
Existed
NAVI control unit
Ground
Continuity
Connector
Terminals
M316
71
Not existed
Revision: November 2015
2016 JUKE
AV
U12AC NAVI CONTROL UNIT
AV-153
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U12AC NAVI CONTROL UNIT
DTC Logic
INFOID:0000000012202563
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible cause
U12AC
DISPLAY TEMPERATURE
TOO HIGH
(Display temperature too
high)
Excessive display circuit temperature is detect-
ed.
Replace the NAVI control unit if the mal-
function occurs constantly.
Refer to
AV-182, "Removal and Installa-
.
Revision: November 2015
2016 JUKE
AV-154
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
U12AD NAVI CONTROL UNIT
U12AD NAVI CONTROL UNIT
DTC Logic
INFOID:0000000012202564
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible cause
U12AD
ECU TEMPERATURE TOO
HIGH
(Electronic control unit tem-
perature too High)
Excessive internal ECU circuit temperature is
detected.
Replace the NAVI control unit if the mal-
function occurs constantly.
Refer to
AV-182, "Removal and Installa-
.
Revision: November 2015
2016 JUKE
AV
U12AE NAVI CONTROL UNIT
AV-155
< DTC/CIRCUIT DIAGNOSIS >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U12AE NAVI CONTROL UNIT
DTC Logic
INFOID:0000000012202565
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible cause
U12AE
INTERNAL AMP TEMP
WARNING
(Internal amplifier tempera-
ture warning)
Excessive internal amplifier circuit temperature
is detected.
Replace the NAVI control unit if the mal-
function occurs constantly.
Refer to
AV-182, "Removal and Installa-
.
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст