Nissan Juke (2016 year). Service Repair Manual — part 582
SRS AIR BAG SYSTEM
SRC-23
< WIRING DIAGRAM >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
JRHWC4694GB
Revision: November 2015
2016 JUKE
SRC-24
< WIRING DIAGRAM >
SRS AIR BAG SYSTEM
JRHWC4695GB
Revision: November 2015
2016 JUKE
SRS AIR BAG SYSTEM
SRC-25
< WIRING DIAGRAM >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
JRHWC4696GB
Revision: November 2015
2016 JUKE
SRC-26
< WIRING DIAGRAM >
SRS AIR BAG SYSTEM
JRHWC4697GB
Revision: November 2015
2016 JUKE
SRS AIR BAG SYSTEM
SRC-27
< WIRING DIAGRAM >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
JRHWC4698GB
Revision: November 2015
2016 JUKE
SRC-28
< WIRING DIAGRAM >
SRS AIR BAG SYSTEM
JRHWC4699GB
Revision: November 2015
2016 JUKE
DIAGNOSIS AND REPAIR WORK FLOW
SRC-29
< BASIC INSPECTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000012199581
OVERALL SEQUENCE
DETAILED FLOW
JMHIA2620GB
Revision: November 2015
2016 JUKE
SRC-30
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
1.
GET INFORMATION FOR SYMPTOM
1. Get detailed information from the customer about the symptom (the condition and the environment when
the incident/malfunction occurs).
2. Check operation condition of the function that is malfunctioning.
>> GO TO 2.
2.
CHECK DTC
1. Check DTC.
2. Perform the following procedure if DTC is detected.
-
Record DTC (Print them out using CONSULT).
-
Erase DTC.
-
Study the relationship between the cause detected by DTC and the symptom described by the customer.
3. Check related service bulletins for information.
Are any symptoms described and any DTC detected?
Symptom is described, DTC is detected>>GO TO 3.
Symptom is described, DTC is not detected>>GO TO 4.
Symptom is not described, DTC is detected>>GO TO 5.
3.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
Verify relation between the symptom and the condition when the symptom is detected.
>> GO TO 5.
4.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
Verify relation between the symptom and the condition when the symptom is detected.
>> GO TO 6.
5.
PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC CONFIRMATION PROCEDURE for the detected DTC, and then check that DTC is detected
again.
Is DTC detected?
YES
>> GO TO 7.
NO
>> Check according to
GI-45, "Intermittent Incident"
.
6.
DETECT MALFUNCTIONING SYSTEM BY SYMPTOM DIAGNOSIS
Detect malfunctioning system according to SYMPTOM DIAGNOSIS based on the confirmed symptom in step
4, and determine the trouble diagnosis order based on possible causes and symptom.
>> GO TO 7.
7.
DETECT MALFUNCTIONING PART BY DIAGNOSIS PROCEDURE
Inspect according to Diagnosis Procedure of the system.
Is malfunctioning part detected?
YES
>> GO TO 8.
NO
>> Check according to
GI-45, "Intermittent Incident"
.
8.
REPAIR OR REPLACE THE MALFUNCTIONING PART
1. Repair or replace the malfunctioning part.
2. Reconnect parts or connectors disconnected during Diagnosis Procedure again after repair and replace-
ment.
3. Check DTC. If DTC is detected, erase it.
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст