Nissan Juke (2016 year). Service Repair Manual — part 25
AV-188
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
GPS ANTENNA
GPS ANTENNA
Removal and Installation
INFOID:0000000012202598
REMOVAL
1. Remove instrument panel. Refer to
IP-13, "Removal and Installation"
2. Remove antenna feeder clip, then remove GPS antenna screw and remove GPS antenna.
INSTALLATION
Install in the reverse order of removal.
Revision: November 2015
2016 JUKE
AV
MICROPHONE
AV-189
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
MICROPHONE
Removal and Installation
INFOID:0000000012202599
REMOVAL
1. Remove headlining. Refer to
INT-27, "NORMAL ROOF : Removal and Installation"
30, "SUNROOF : Removal and Installation"
2. Remove microphone connector and pawl to remove microphone.
INSTALLATION
Install in the reverse order of removal.
Revision: November 2015
2016 JUKE
AV-190
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
AROUND VIEW MONITOR CONTROL UNIT
AROUND VIEW MONITOR CONTROL UNIT
Removal and Installation
INFOID:0000000012202600
REMOVAL
CAUTION:
Before replacing around view monitor control unit, perform “Read/Write Configuration” to save or
print current vehicle specification. For details, refer to
AV-113, "ADDITIONAL SERVICE WHEN
REPLACING AROUND VIEW MONITOR CONTROL UNIT : Description"
.
1. Remove globe box assembly. Refer to
IP-13, "Removal and Installation"
.
2. Remove harness clip mounted to the bracket.
3. Remove the mounting screws (A) and pull the around view mon-
itor control unit (1) together with the bracket.
4. Disconnect connectors to remove around view monitor control unit and bracket from the vehicle as a sin-
gle unit.
5. Remove bracket screws to remove around view monitor control unit.
INSTALLATION
1. Install in the reverse order of removal.
2. Perform camera image calibration. Refer to
AV-116, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
CAUTION:
• Be sure to perform “Read/Write Configuration” when replacing around view monitor control unit. For
details, refer to
AV-113, "ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CON-
• Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.
JSNIA8056ZZ
Revision: November 2015
2016 JUKE
AV
FRONT CAMERA
AV-191
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT CAMERA
Removal and Installation
INFOID:0000000012202601
REMOVAL
1. Remove front grille. Refer to
EXT-26, "Removal and Installation"
2. Remove front camera mounting screws to remove front camera from front grille.
INSTALLATION
1. Install in the reverse order of removal.
2. Perform camera image calibration. Refer to
AV-116, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.
Revision: November 2015
2016 JUKE
AV-192
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
REAR CAMERA
REAR CAMERA
Removal and Installation
INFOID:0000000012202602
REMOVAL
1. Remove back door lower finisher. Refer to
INT-39, "BACK DOOR LOWER FINISHER : Removal and
.
2. Remove connector to remove rear view camera.
INSTALLATION
1. Install in the reverse order of removal.
2. Perform camera image calibration. Refer to
AV-116, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.
Revision: November 2015
2016 JUKE
AV
SIDE CAMERA
AV-193
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SIDE CAMERA
Removal and Installation
INFOID:0000000012202603
REMOVAL
1. Remove door mirror under cover from door mirror. Refer to
MIR-18, "DOOR MIRROR ASSEMBLY : Dis-
2. Remove screws to remove side camera from door mirror under cover.
INSTALLATION
1. Install in the reverse order of removal.
2. Perform camera image calibration. Refer to
AV-116, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.
Revision: November 2015
2016 JUKE
AV-194
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
STEERING ANGLE SENSOR
STEERING ANGLE SENSOR
Exploded View
INFOID:0000000012202604
DISASSEMBLY
Removal and Installation
INFOID:0000000012202605
REMOVAL
1. Remove spiral cable. Refer to
SR-15, "Removal and Installation"
.
2. Remove steering angle sensor from spiral cable.
INSTALLATION
1. Install in the reverse order of removal.
2. Perform steering angle sensor neutral position adjustment. Refer to
JSNIA0135ZZ
1.
Spiral cable
2.
Steering angle sensor
Revision: November 2015
2016 JUKE
AV
STEERING SWITCH
AV-195
< REMOVAL AND INSTALLATION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING SWITCH
Exploded View
INFOID:0000000012202606
.
Removal and Installation
INFOID:0000000012202607
REMOVAL
ST-9, "Removal and Installation"
.
INSTALLATION
Install in the reverse order of removal.
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст