Nissan Juke (2016 year). Service Repair Manual — part 27
AV-204
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
SYSTEM
Input signal
SYSTEM DESCRIPTION
• The multi display unit receives necessary information for controlling the following functions from the respec-
tive units via CAN communication.
- D-MODE function
- Information display/setting
- Air conditioner adjustment function. Refer to
• The multi display unit transmits the status of user-selected D-MODE (NORMAL, SPORT, or ECO) to the
TCM (CVT models), ECM (M/T models), EPS control unit and A/C auto amp. For the D-MODE functions,
refer to
.
• TCM transmits to ECM the D-MODE status (NORMAL, SPORT, or ECO) received from the multi display unit
(CVT models).
• ECM (M/T models) and EPS control unit receives the D-MODE status (NORMAL, SPORT, or ECO) from the
multi display unit.
• The A/C auto amp. receives the air conditioner switch operation signal, ECO mode signal, and ECO mode
switch signal from the multi display unit.
• The multi display unit integrates a diagnosis function that allows a diagnosis by CONSULT.
Nissan Dynamic Control System Display/Setting Functions
EPS control unit
ECO mode signal
Transmits the “D-MODE” ECO switch status of the multi display unit.
NORMAL mode signal
Transmits the “D-MODE” NORMAL switch status of the multi display
unit.
SPORT mode signal
Transmits the “D-MODE” SPORT switch status of the multi display unit.
Transmit unit
Signal name
Description
A/C auto amp.
A/C display signal
Receives a display signal according to the air conditioner status from
the A/C auto amp.
ECM
Engine speed signal
Receives the engine speed signal.
Engine torque signal
Receives the engine torque signal calculated by ECM.
Fuel consumption monitor signal
Receives the consumption monitor signal calculated by ECM.
Boost pressure signal
Receives the boost pressure signal calculated by ECM.
Engine status signal
Receives the engine status signal.
BCM
Position light request signal
Receives a position light request signal according to the light switch
status.
ABS actuator and
electric unit (control
unit)
Decel G sensor signal
Receives the decel. G sensor signal calculated by the ABS actuator
and electric unit (control unit).
Side G sensor signal
Receives the side G sensor signal calculated by the ABS actuator and
electric unit (control unit).
Combination meter
Vehicle speed signal
Receives the vehicle speed signal.
Odometer signal
Receives the odometer signal.
Reception unit
Signal name
Description
Category
Display function
Display content
CLIMATE
CLIMATE CONTROL
DRIVE MODE
NORMAL
ENGINE TORQUE GAUGE
Displays the engine torque in 5 grades when NORMAL is selected
with the D-MODE switch.
VOLTMETER
Displays the voltage input to the multi display unit in 5 grades along
with engine torque gauge when NORMAL is selected with the D-
MODE switch.
SPORT
BOOST GAUGE
Displays the boost gauge reading in 5 grades when SPORT is select-
ed with the D-MODE switch.
ECO
INSTANTANEOUS FUEL
CONSUMPTION GAUGE
Displays the instantaneous fuel consumption in 5 grades when ECO
is selected with the D-MODE switch.
Revision: November 2015
2016 JUKE
AV
SYSTEM
AV-205
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Engine Torque Gauge
The engine torque gauge displays the engine torque level in 5
grades based on the engine torque signal received from ECM via
CAN communication.
Engine torque gauge display characteristic
Voltmeter
The voltmeter reads the input voltage of the multi display unit and
displays the voltage level in 5 grades according to the reading.
Drive Information
G-FORCE
Displays the status of side G and decel. G.
Drive Infor-
mation
Travel time
• Displays the total time of key switch ON from a reset to a next re-
set.
• If the total time exceeds 100 hours, the display is reset to
"00:00:00" and the time calculation restarts.
Average speed
Displays the average speed during key switch ON from a reset to a
next reset.
Travel distance
Displays the mileage during key switch ON from a reset to a next re-
set.
ECO Information
Fuel consumption history
Displays the fuel consumption history data on the basis of daily,
weekly, drive interval and reset interval.
Category
Display function
Display content
AVA1251
JSNIA3466GB
AVA1251
Revision: November 2015
2016 JUKE
AV-206
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
SYSTEM
Voltmeter display characteristic
Boost Gauge
The boost gauge displays the boost level in 5 grades based on the
boost pressure signal received from ECM via CAN communication.
Boost gauge display characteristic
Instantaneous Fuel Consumption
The instantaneous fuel consumption gauge displays the instanta-
neous fuel consumption in 5 grades, which is calculated from the
fuel consumption monitor signal received from ECM via CAN com-
munication and the vehicle speed signal received from the combina-
tion meter via CAN communication.
JSNIA3467GB
AVA1257
JSNIA3469GB
AVA1305
Revision: November 2015
2016 JUKE
AV
SYSTEM
AV-207
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Fuel ECO display characteristic
G-Force
The G-FORCE gauge displays the decel G level and side G level in
3 grades respectively, which are calculated based on the decel G
sensor signal and side G sensor signal received from the ABS actu-
ator and electric unit (control unit) via CAN communication.
Drive Information
The travel time, average speed, and mileage are displayed as fol-
lows.
• Travel time: Displays the time calculated by the multi display unit.
• Average speed: Calculated from the odometer signal and vehicle
speed signal received from the combination meter via CAN com-
munication.
• Mileage: Calculated from the odometer signal and vehicle speed
signal received from the combination meter via CAN communica-
tion.
ECO Information
The fuel economy record is calculated from the fuel consumption
monitor signal received from ECM via CAN communication and the
vehicle speed signal received from the combination meter via CAN
communication.
Set Up
JSNIA3470GB
AVA1255
AVA1256
AVA1306
Revision: November 2015
2016 JUKE
AV-208
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
SYSTEM
The following items can be set.
• Display Brightness
• Button Brightness
• Select Language
• Select Units
• Clock Time Setting
• CLIMATE ECO
• Auto Interior Illumination
• Selective Door Unlock
• Auto Headlight Sensitivity
Display/operation restrictions
• To secure safety, some functions are not allowed for user operation during driving.
• The functions subject to the display/operation restriction are as follows.
Driving status judgment criterion
• The driving status is judged from the vehicle speed signal received from the combination meter via CAN
communication. The driving status is displayed on the multi display unit and operation restrictions are
applied as necessary.
AVA1263
Function
Condition
Control content
ECO information
(Fuel Economy Record)
Daily Reset, Weekly Reset, Re-
set at Start, and Manual Reset
Driving
Cannot be operated
(Reset, page scroll)
Daily Reset, and Weekly Reset
When no time is set
Fuel consumption history is not
displayed
(Warning message appears)
SET UP
Driving
• Item selection and setting are
not available
• No display
JSNIA3472GB
Revision: November 2015
2016 JUKE
AV
HANDLING PRECAUTION
AV-209
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
HANDLING PRECAUTION
Integrated Control System
INFOID:0000000012202616
• The engine torque, engine power, boost, and instantaneous fuel consumption are provided for information
purposes only. They are not intended to prompt the driver to adjust driving style. The readings may be
slightly delayed relative to the actual vehicle behaviors. This is not a malfunction.
• The voltmeter reading cannot be used as an indicator for battery replacement because it indicates the input
voltage to the multi display unit, not the battery voltage.
• The SET UP screen are viewable and operable only while the vehicle is stopped.
• The ECO information screen is operable only while the vehicle is stopped.
• If no time setting is performed, the daily and weekly fuel consumption history data are not displayed.
• The readings may differ from the actual values depending on driving conditions.
Revision: November 2015
2016 JUKE
AV-210
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)
DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)
CONSULT Function
INFOID:0000000012202617
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with multi display unit.
SELF DIAGNOSTIC RESULT
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Diagnosis mode
Description
Self Diagnostic Results
Displays malfunctioning systems stored in the multi display unit.
Data Monitor
Displays the multi display unit input/output data in real time.
Active Test
The multi display unit sends a drive signal to electronic components to check their operation.
CAN Diag Support Monitor
Displays CAN communication status.
Monitor item
Unit
Description
ECO SW
On / Off
Displays the ECO switch signal status sent via CAN communication.
NORMAL SW
On / Off
Displays the NORMAL switch signal status sent via CAN communication.
SPORTS SW
On / Off
Displays the SPORTS switch signal status sent via CAN communication.
BOOST PRESSURE
kPa
Displays the boost pressure signal value received from ECM via CAN com-
munication.
ENGINE SPEED
Tr/min
Displays the engine speed signal value received from ECM via CAN com-
munication.
ENGINE TORQUE
Nm
Displays the engine torque signal value received from ECM via CAN com-
munication.
BATTERY VOLTAGE
V
Displays the input voltage value.
FUEL CONSUMPTION
mm
3
Displays the fuel consumption signal value received from ECM via CAN
communication.
VEHICLE SPEED
km/h
Displays the vehicle speed signal value received from the combination
meter via CAN communication.
LONG ACC
G
Displays the decel G signal received from ABS actuator and electric unit
(control unit) via CAN communication.
TRANCE ACC
G
Displays the side G signal received from ABS actuator and electric unit
(control unit) via CAN communication.
DIST TOTAL
km
Displays the mileage signal value received from the combination meter via
CAN communication.
POSI LIGHT REQ
On / Off
Displays the parking lamp signal value received from BCM via CAN com-
munication.
CLUSTER ILL REQ
On / Off
Displays the dimming signal value received from BCM via CAN communi-
cation.
ENGINE STATUS
STOP / STALL /
RUN / CRA
Displays the engine status signal value received from ECM via CAN com-
munication.
A/C SW
*
On / Off
Displays the A/C switch signal status sent via CAN communication.
AUTO SW
*
On / Off
Displays the AUTO switch signal status sent via CAN communication.
RR DEF SW
*
On / Off
Displays the RR DEF switch signal status sent via CAN communication.
FR DEF SW
*
On / Off
Displays the FR DEF switch signal status sent via CAN communication.
Revision: November 2015
2016 JUKE
AV
DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)
AV-211
< SYSTEM DESCRIPTION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
*: This is not used to determine ON/OFF of the indicator lamp.
ACTIVE TEST
Indicator
VENT SW1
*
On / Off
Displays the air outlet switch signal status sent via CAN communication.
VENT SW2
*
VENT / B/L / FOOT
/ D/F
Displays the air outlet switch signal status sent via CAN communication.
INTAKE SW
*
On / Off
Displays the air intake switch signal status sent via CAN communication.
INTAKE SW LONG PUSH
*
On / Off
Displays the air intake switch hold signal status sent via CAN communica-
tion.
OFF SW
*
On / Off
Displays the OFF switch signal status sent via CAN communication.
TEMP SW1
*
On / Off
Displays the temperature control dial signal status sent via CAN communi-
cation.
FAN SW1
*
On / Off
Displays the fan control dial signal status sent via CAN communication.
A/C SW IND
On / Off
Displays the A/C switch indicator signal value received from the A/C auto
amp. via CAN communication.
A/C INDICATOR
On / Off
Displays the A/C display signal value received from the A/C auto amp. via
CAN communication.
OFF INDICATOR
On / Off
Displays the OFF display signal value received from the A/C auto amp. via
CAN communication.
AIR VENT IND
Non-display / VENT
/
B/L / FOOT /
D/F / DEF
Displays the air outlet indicator signal value received from the A/C auto
amp. via CAN communication.
FR DEF SW IND
On / Off
Displays the RF DEF indicator signal value received from the A/C auto
amp. via CAN communication.
FRE SW IND
On / Off
Displays the FRE indicator signal value received from the A/C auto amp.
via CAN communication.
REC SW IND
On / Off
Displays the REC indicator signal value received from the A/C auto amp.
via CAN communication.
RR DEF SW IND
On / Off
Displays the RR DEF indicator signal value received from the IPDM E/R
via CAN communication.
AUTO IND
Off / Auto
Displays the AUTO indicator signal value received from the A/C auto amp.
via CAN communication.
TEMP IND
°
C
Displays the temperature setting unit signal value received from the A/C
auto amp. via CAN communication.
FAN IND
Off / speed
Displays the fan setting signal value received from the A/C auto amp. via
CAN communication.
Monitor item
Unit
Description
Test Item
Description
INDICATOR
The test activates the switch illuminations, display illuminations, and switch LEDs in the AIR CON
mode and D-MODES to see if they are functioning normally.
Test Item
Function
INDICATOR
The sequence below is repeated.
• All indicators remain ON for 5 seconds in AIR CON mode
⇔
All indicators remain ON for 5 seconds
in D-MODE.
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст