Nissan Juke (2016 year). Service Repair Manual — part 502
MWI-40
< WIRING DIAGRAM >
METER SYSTEM
JRNWF0715GB
Revision: November 2015
2016 JUKE
MWI
METER SYSTEM
MWI-41
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
JRNWF0716GB
Revision: November 2015
2016 JUKE
MWI-42
< WIRING DIAGRAM >
METER SYSTEM
JRNWF0717GB
Revision: November 2015
2016 JUKE
MWI
METER SYSTEM
MWI-43
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
JRNWF0718GB
Revision: November 2015
2016 JUKE
MWI-44
< WIRING DIAGRAM >
METER SYSTEM
JRNWF0719GB
Revision: November 2015
2016 JUKE
MWI
METER SYSTEM
MWI-45
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
JRNWF0720GB
Revision: November 2015
2016 JUKE
MWI-46
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW (METER SYSTEM)
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW (METER SYSTEM)
Work flow
INFOID:0000000012201320
OVERALL SEQUENCE
• Reference 1···
MWI-21, "On Board Diagnosis Function"
• Reference 2···
.
• Reference 3···
MWI-53, "COMBINATION METER : Diagnosis Procedure"
.
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurred.
>> GO TO 2.
2.
CHECK SYMPTOM
JSNIA4491GB
Revision: November 2015
2016 JUKE
MWI
DIAGNOSIS AND REPAIR WORKFLOW (METER SYSTEM)
MWI-47
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• Check the symptom based on the information obtained from the customer.
• Check that any other malfunctions are present.
>> GO TO 3.
3.
CHECK ON BOARD DIAGNOSIS OPERATION
Check that the on board diagnosis function operates. Refer to
MWI-21, "On Board Diagnosis Function"
.
Does the on board diagnosis function operate normally?
YES
>> GO TO 4.
NO
>> GO TO 6.
4.
CHECK CONSULT SELF-DIAGNOSIS RESULTS
1. Connect CONSULT and perform self-diagnosis. Refer to
2. When DTC is detected, follow the instructions below:
-
Record DTC and Freeze Frame Data.
Are self-diagnosis results normal?
YES
>> GO TO 5.
NO
>> GO TO 8.
5.
NARROW DOWN THE MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis and narrow down the malfunctioning parts.
>> GO TO 8.
6.
CHECK COMBINATION METER POWER SUPPLY AND GROUND CIRCUITS
Check combination meter power supply and ground circuits. Refer to
.
Is inspection result OK?
YES
>> GO TO 7.
NO
>> GO TO 8.
7.
REPLACE COMBINATION METER
Replace combination meter.
>> GO TO 9.
8.
REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace the malfunctioning parts.
NOTE:
If DTC is displayed, erase DTC after repair or replace malfunctioning parts.
>> GO TO 9.
9.
FINAL CHECK
Check that the combination meter operates normally.
Do they operate normally?
YES
>> INSPECTION END
NO
>> GO TO 1.
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст