Nissan Juke (2016 year). Service Repair Manual — part 500
MWI-24
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
• *1: CVT models
• *2: M/T models
NOTE:
Some items are not available according to vehicle specification.
Warning History
O/D OFF SW
[Off]
This item is displayed, but cannot be monitored.
M RANGE SW
[On/Off]
Status of manual mode switch.
NM RANGE SW
[On/Off]
Status of non-manual mode switch.
AT SFT UP SW
[On/Off]
Status of manual mode shift up switch.
AT SFT DWN SW
[On/Off]
Status of manual mode shift down switch.
ST SFT UP SW
[On/Off]
Status of paddle shifter up switch.
ST SFT DWN SW
[On/Off]
Status of paddle shifter down switch.
PKB SW
[On/Off]
Status of parking brake switch.
BUCKLE SW
[On/Off]
Status of seat belt buckle switch (driver side).
BRAKE SW
[Off]
This item is displayed, but cannot be monitored.
BRAKE OIL SW
[On/Off]
Status of brake fluid level switch.
A/C AMP CONN
[On/Off]
Status of A/C auto amp. connection recognition signal.
PASS BUCKLE SW
[Off]
This item is displayed, but cannot be monitored.
DISTANCE
[km]
Value of distance to empty calculated by combination meter.
OUTSIDE TEMP
[
°
C or
°
F]
Ambient temperature value converted from ambient sensor signal received from
ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information dis-
play. (Because the information display value is a corrected value from the ambient
sensor input value.)
FUEL LOW SIG
[On/Off]
Status of fuel level low warning signal to output to AV control unit via CAN com-
munication.
BUZZER
[On/Off]
X
Buzzer status (in the combination meter) is detected from the buzzer output signal
received from each unit via CAN communication and the warning output condition
of the combination meter.
ASCD SPD BLNK
[On/Off]
Blinking status of ASCD or speed limiter set vehicle speed that is judged by the
ASCD status signal received from ECM via CAN communication.
ASCD STATUS
[Off, ASCD, CRUISE, SL ON, SL
SET]
Display status of ASCD and speed limiter status display judged by the ASCD sta-
tus signal received from ECM via CAN communication.
ASCD REQ SPD
[km/h/Off]
ASCD or speed limiter set vehicle speed value that is judged by the ASCD status
signal received from ECM via CAN communication.
TPMS PRESS L
[On/Off]
Status of low tire pressure warning judged from low tire pressure warning lamp
signal received from BCM with CAN communication line.
Display item [Unit]
MAIN
SIGNALS
Description
Revision: November 2015
2016 JUKE
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-25
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• Stores histories when warning/indicator lamp is turned on.
• “Warning History” indicates the “TIME” when the warning/indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO Warning History: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• Warning History is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
Display Item
NOTE:
In items displayed on the CONSULT screen, only those listed in the above table are used.
Display item
Description
ABS W/L
Lighting history of ABS warning lamp.
VDC/TCS IND
Lighting history of VDC OFF indicator lamp.
SLIP IND
Lighting history of VDC warning lamp.
BRAKE W/L
Lighting history of brake warning lamp.
DOOR W/L
Lighting history of door open warning.
OIL W/L
Lighting history of oil pressure warning lamp.
C-ENG W/L
Lighting history of malfunction indicator lamp.
CRUISE IND
Lighting history of CRUISE indicator lamp.
CVT IND
Lighting history of CVT indicator lamp.
4WD W/L
Lighting history of AWD warning lamp.
FUEL W/L
Lighting history of low fuel level warning lamp.
AIR PRES W/L
Lighting history of low tire pressure warning lamp.
KEY G/Y W/L
Lighting history of KEY warning lamp (G/Y).
KEY KNOB W/L
Lighting history of Shift P warning lamp.
EPS W/L
Lighting history of EPS warning lamp.
Revision: November 2015
2016 JUKE
MWI-26
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000012201315
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor Item
Condition
Value/Status
SPEED METER
[km/h]
Ignition switch
ON
While driving
Input value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
SPEED OUTPUT
[km/h]
Ignition switch
ON
While driving
Output value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
ODO OUTPUT
[km/h or mph]
Ignition switch
ON
—
Output value of odometer signal (CAN
communication signal)
TACHO METER
[rpm]
Ignition switch
ON
Engine running
Input value of engine speed signal
(CAN communication signal)
NOTE:
8191.875 is displayed when the mal-
function signal is received
FUEL METER
[L]
Ignition switch
ON
—
Input value of fuel level sensor signal
W TEMP METER
[
°
C]
Ignition switch
ON
—
Input value of engine coolant tempera-
ture signal (CAN communication sig-
nal)
NOTE:
215 is displayed when the malfunction
signal is input
FUEL CAP W/L
Ignition switch
ON
Fuel filler cap warning display ON
On
Fuel filler cap warning display OFF
Off
ABS W/L
Ignition switch
ON
ABS warning lamp ON
On
ABS warning lamp OFF
Off
VDC/TCS IND
Ignition switch
ON
VDC OFF indicator lamp ON
On
VDC OFF indicator lamp OFF
Off
SLIP IND
Ignition switch
ON
VDC warning lamp ON
On
VDC warning lamp OFF
Off
BRAKE W/L
Ignition switch
ON
Brake warning lamp ON
On
Brake warning lamp OFF
Off
DOOR W/L
Ignition switch
ON
Door open warning lamp ON
On
Door open warning lamp OFF
Off
HI-BEAM IND
Ignition switch
ON
High-beam indicator lamp ON
On
High-beam indicator lamp OFF
Off
TURN IND
Ignition switch
ON
Turn signal indicator lamp ON
On
Turn signal indicator lamp OFF
Off
Revision: November 2015
2016 JUKE
MWI
COMBINATION METER
MWI-27
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FR FOG IND
Ignition switch
ON
Front fog lamp indicator lamp ON
On
Front fog lamp indicator lamp OFF
Off
LIGHT IND
Ignition switch
ON
Tail lamp indicator lamp ON
On
Tail lamp indicator lamp OFF
Off
OIL W/L
Ignition switch
ON
Oil pressure warning lamp ON
On
Oil pressure warning lamp OFF
Off
MIL
Ignition switch
ON
Malfunction indicator lamp ON
On
Malfunction indicator lamp OFF
Off
GLOW IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
C-ENG2 W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
CRUISE IND
Ignition switch
ON
CRUISE indicator lamp ON
On
CRUISE indicator lamp OFF
Off
SET IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
CVT IND
Ignition switch
ON
CVT indicator ON
On
CVT indicator OFF
Off
4WD W/L
Ignition switch
ON
AWD warning lamp ON
On
AWD warning lamp OFF
Off
4WD LOCK IND
Ignition switch
ON
AWD mode indicator lamp (AWD-V) ON
On
AWD mode indicator lamp (AWD-V) OFF
Off
FUEL W/L
Ignition switch
ON
During low fuel warning indication
On
Other than the above
Off
AIR PRES W/L
Ignition switch
ON
Low tire pressure warning lamp ON
On
Other than the above
Off
KEY G/Y W/L
Ignition switch
ON
During Intelligent Key system malfunction
indication
On
Other than the above
Off
KEY KNOB W/L
Ignition switch
ON
SHIFT P warning lamp ON
On
SHIFT P warning lamp OFF
Off
EPS W/L
Ignition switch
ON
EPS warning lamp ON
On
EPS warning lamp OFF
Off
DPF W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
Monitor Item
Condition
Value/Status
Revision: November 2015
2016 JUKE
MWI-28
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
LCD
Ignition switch
LOCK or ACC
Engine start operation indicator lamp ON
(CVT models)
B&P N
Ignition switch
ON
Engine start operation indicator lamp ON
(CVT models)
B&P I
Ignition switch
LOCK or ACC
Engine start operation indicator lamp ON
(M/T models)
C&P N
Ignition switch
ON
Engine start operation indicator lamp ON
(M/T models)
C&P I
Ignition switch
LOCK
During P position warning indication
SFT P
Ignition switch
LOCK
During Intelligent Key low battery warning
indication
BATT
Ignition switch
ON
During take away warning indication
NO KY
Ignition switch
ON
During ACC warning indication
LK WN
SHIFT IND
Ignition switch
ON
Shift position indicator P display
P
Shift position indicator R display
R
Shift position indicator N display
N
Shift position indicator D display
D
Shift position indicator M1 display
M1
Shift position indicator M2 display
M2
Shift position indicator M3 display
M3
Shift position indicator M4 display
M4
Shift position indicator M5 display
M5
Shift position indicator M6 display
M6
Shift position indicator M7 display
M7
Shift position indicator M8 display
M8
O/D OFF SW
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
M RANGE SW
Ignition switch
ON
Selector lever in manual mode position
On
Other than the above
Off
NM RANGE SW
Ignition switch
ON
Selector lever in manual mode position
Off
Other than the above
On
AT SFT UP SW
Ignition switch
ON
Selector lever in + position
On
Other than the above
Off
AT SFT DWN SW
Ignition switch
ON
Selector lever in – position
On
Other than the above
Off
ST SFT UP SW
Ignition switch
ON
Paddle shifter switch up operation
On
Other than the above
Off
ST SFT DWN SW
Ignition switch
ON
Paddle shifter switch up operation
On
Other than the above
Off
PKB SW
Ignition switch
ON
Parking brake switch ON
On
Parking brake switch OFF
Off
BUCKLE SW
Ignition switch
ON
Driver seat belt not fastened
On
Driver seat belt fastened
Off
Monitor Item
Condition
Value/Status
Revision: November 2015
2016 JUKE
MWI
COMBINATION METER
MWI-29
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
Some items are not available according to vehicle specification.
TERMINAL LAYOUT
PHYSICAL VALUES
BRAKE SW
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
BRAKE OIL SW
Ignition switch
ON
Brake fluid level switch ON
On
Brake fluid level switch OFF
Off
A/C AMP CONN
Ignition switch
ON
Other than the following
On
Receives A/C auto amp. connection recog-
nition signal
Off
PASS BUCKLE SW
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
DISTANCE
[km]
Ignition switch
ON
—
Distance to empty calculated by com-
bination meter
OUTSIDE TEMP
[
°
C or
°
F]
Ignition switch
ON
—
Input value of ambient sensor signal
(CAN communication signal)
NOTE:
This may not match the indicated value
on the information display.
FUEL LOW SIG
Ignition switch
ON
During low fuel warning indication
On
Other than above
Off
BUZZER
Ignition switch
ON
Buzzer ON
On
Buzzer OFF
Off
ASCD SPD BLNK
Ignition switch
ON
Set vehicle speed indicator blinking
On
Set vehicle speed indicator not blinking
Off
ASCD STATUS
Ignition switch
ON
ASCD and speed limiter system OFF
Off
ASCD system ON
ASCD
ASCD set vehicle speed
CRUISE
ASCD REQ SPD
[km/h or Off]
Ignition switch
ON
While driving
Same value as ASCD or speed limiter
set vehicle speed
TPMS PRESS L
Ignition switch
ON
Low tire pressure warning display ON
On
Low tire pressure warning display OFF
Off
Monitor Item
Condition
Value/Status
JSNIA0623ZZ
Revision: November 2015
2016 JUKE
MWI-30
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
1
(L)
—
CAN-H
—
—
—
—
2
(P)
—
CAN-L
—
—
—
—
4
(Y)
Ground
Vehicle speed signal
(8-pulse)
Output
Ignition
switch
ON
Speedometer operated
[When vehicle speed is ap-
prox. 40 km/h (25 MPH)]
NOTE:
The maximum voltage varies de-
pending on the specification
(destination unit).
5
(G)
Ground
Paddle shifter up switch
signal
Input
Ignition
switch
ON
Paddle shifter up operated
0 V
Other than the above
12 V
6
(BR)
Ground Fuel level sensor signal
Input
Ignition
switch
ON
—
2WD
AWD
7
(R)
Ground
Air bag signal
Input
Ignition
switch
ON
Air bag warning lamp
ON
4 V
Air bag warning lamp
OFF
0 V
8
*1
(P)
—
—
—
—
—
—
9
(W)
Ground
Seat belt buckle switch sig-
nal (driver side)
Input
Engine
idling
When driver seat belt is fas-
tened.
12 V
When driver seat belt is un-
fastened.
0 V
10
(SB)
Ground
Parking brake switch signal
Input
Ignition
switch
ON
Parking brake applied.
0 V
Parking brake released.
5 V
11
(G)
Ground
Brake fluid level switch sig-
nal
Input
Ignition
switch
ON
Brake fluid level is normal
5 V
Brake fluid level is less than
LOW level
0 V
JSNIA0012GB
JSNIA3305ZZ
JSNIA3721ZZ
Revision: November 2015
2016 JUKE
MWI
COMBINATION METER
MWI-31
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
13
(GR)
Ground Illumination control signal
Output
Ignition
switch
ON
• Lighting switch 1ST
• When meter illumination
is maximum
• Lighting switch 1ST
• When meter illumination
is step 6
• Lighting switch 1ST
• When meter illumination
is minimum
12 V
14
(R)
Ground
Manual mode shift up sig-
nal
Input
Ignition
switch
ON
Selector lever UP operation
0 V
Other than the above
12 V
15
(L)
Ground
ACC power supply
Input
Ignition
switch
ACC
—
Battery voltage
16
(W)
Ground
Manual mode shift down
signal
Input
Ignition
switch
ON
Selector lever DOWN oper-
ation
0 V
Other than the above
12 V
17
(G)
Ground
Washer level switch signal
Input
Ignition
switch
ON
Low washer fluid warning
lamp ON
0 V
Low washer fluid warning
lamp OFF
12 V
18
(R)
Ground
Security signal
Input
Ignition
switch
ON
Security indicator lamp ON
0 V
Security indicator lamp
OFF
12 V
19
(GR)
Ground Ambient sensor signal
Input
Ignition
switch
ON
Changes depending to am-
bient temperature.
20
(R)
Ground Ambient sensor ground
—
Ignition
switch
ON
—
0 V
21
(B)
Ground Ground
—
Ignition
switch
ON
—
0 V
22
(B)
Ground Ground
—
Ignition
switch
ON
—
0 V
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
JPNIA1687GB
JPNIA1686GB
JSNIA0014GB
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст