Nissan Juke (2016 year). Service Repair Manual — part 498
MWI-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
METER SYSTEM
METER SYSTEM : System Diagram
INFOID:0000000012201295
METER SYSTEM : System Description
INFOID:0000000012201296
COMBINATION METER
• The combination meter receives necessary signals from each unit, switch, and sensor to control the follow-
ing functions.
- Measuring instruments
- Shift position indicator
- Warning lamps
- Indicator lamps
- Meter illumination control
- Meter effect function
- Information display
• The combination meter incorporates a buzzer function that sounds an audible alarm with the integrated
buzzer device. Refer to
for further details.
• The combination meter includes an on board diagnosis function.
• The combination meter can be diagnosed with CONSULT.
METER CONTROL FUNCTION LIST
JSNIA6876GB
System
Description
Reference
Measuring in-
struments
Speedometer
Indicates vehicle speed.
MWI-11,
"SPEEDOME-
TER : System De-
scription"
Tachometer
Indicates engine speed.
MWI-12, "TA-
CHOMETER :
System Descrip-
tion"
Revision: November 2015
2016 JUKE
MWI
SYSTEM
MWI-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ARRANGEMENT OF COMBINATION METER
Shift position indicator (CVT models)
Display shift position. (CVT models)
MWI-13, "SHIFT
POSITION INDI-
CATOR : System
Description"
Warning lamp/
indicator lamp
Oil pressure warning lamp
The warning lamp turns ON or turns OFF,
according to engine hydraulic pressure.
MWI-13, "OIL
PRESSURE
WARNING LAMP
: System Descrip-
tion"
Meter illumi-
nation control
Meter illumination control function
Switches back and forth between daytime
mode and nighttime mode, according to a
light switch position.
MWI-14, "METER
ILLUMINATION
CONTROL : Sys-
tem Description"
Meter illumination on/off control function
The meter illumination turns ON/OFF, ac-
cording to the status of ignition switch and a
cranking condition.
Buck light illumination control function
The operation of the illumination control
switch allows the brightness adjustment of
meter illumination.
Meter effect
function
Engine-start effect function
Controls pointers of combination meter and
meter illumination at engine start to produce
illumination effects.
MWI-15, "METER
EFFECT FUNC-
TION : System
Description"
Information
display
Fuel gauge
Indicates fuel level.
MWI-16, "INFOR-
MATION DIS-
PLAY : System
Description"
Odo/trip meter
Displays mileage.
Ambient temperature
Displays ambient temperature.
Trip computer
Current fuel consumption
Displays current fuel consumption.
Average fuel consumption
Displays average fuel consumption.
Distance to empty
Displays distance to empty.
Torque distribution indicator
Display torque distribution.
Interrupt indi-
cation
Meter illumination level
Indicates the brightness of the meter illumi-
nation in stages.
Distance to empty
Displays distance to empty when a low fuel
warning.
Warning
Fuel filler cap
warning
Warns, according to the tightening condition
of fuel filler cap.
EC-62, "FUEL
FILLER CAP
WARNING SYS-
TEM : System
Description"
for NISMO RS
models) or
652, "FUEL FILL-
ER CAP WARN-
ING SYSTEM :
System Descrip-
tion"
(MR except
for NISMO RS
models)
Low tire pres-
sure warning
Warns, according to tire inflation pressure.
MWI-16, "INFOR-
MATION DIS-
PLAY : System
Description"
System
Description
Reference
Revision: November 2015
2016 JUKE
MWI-10
< SYSTEM DESCRIPTION >
SYSTEM
METER SYSTEM : Fail-Safe
INFOID:0000000012839331
FAIL-SAFE
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
A.
For U.S.A.
B.
For Canada
JSNIA8950ZZ
Function
Specifications
Speedometer
Reset to zero by suspending communication.
Tachometer
Illumination control
When suspending communication, changes to nighttime mode.
Shift position indicator
When suspending communication, not indicate.
Information display
Instantaneous fuel consumption
• When reception time of an abnormal signal is 2 seconds or
less, the last received datum is used for calculation to indi-
cate the result.
• When reception time of an abnormal signal is more than two
seconds, the last result calculated during normal condition is
indicated.
Average fuel consumption
Possible driving distance
Torque distribution indicator
Low tire pressure warning
The display turns OFF by suspending communication.
Buzzer
The buzzer turns OFF by suspending communication.
Revision: November 2015
2016 JUKE
MWI
SYSTEM
MWI-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPEEDOMETER
SPEEDOMETER : System Diagram
INFOID:0000000012201298
SPEEDOMETER : System Description
INFOID:0000000012201299
• The ABS actuator and electric unit (control unit) converts the rectangular wave signal provided by the wheel
sensor to a vehicle speed signal and transmits it to the combination meter via CAN communication.
• The combination meter indicates the vehicle speed to the speedometer according to the vehicle speed sig-
nal received via CAN communication.
TACHOMETER
Warning lamp/indicator lamp
ABS warning lamp
The lamp turns ON by suspending communication.
Malfunction indicator lamp
VDC warning lamp
EPS warning lamp
AWD warning lamp
Brake warning lamp
VDC OFF indicator lamp
The lamp turns OFF by suspending communication.
High beam indicator lamp
Turn signal indicator lamp
Door warning lamp
Tail lamp indicator lamp
Engine start operation indicator lamp
Shift P warning lamp
Front fog lamp indicator lamp
Oil pressure warning lamp
CRUISE indicator lamp
AWD mode indicator lamp (AWD)
AWD mode indicator lamp (AWD-V)
Key warning lamp
CVT indicator lamp
Low tire pressure warning lamp
After blinking for 1 minute, the lamp remains ON.
High coolant temperature indicator
lamp
When reception time of an abnormal signal is more than 60
seconds, the lamp turns OFF.
Function
Specifications
JSNIA2973GB
Revision: November 2015
2016 JUKE
MWI-12
< SYSTEM DESCRIPTION >
SYSTEM
TACHOMETER : System Diagram
INFOID:0000000012201300
CVT models
M/T models
TACHOMETER : System Description
INFOID:0000000012201301
CVT models
• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and
transmits it to the TCM via CAN communication.
• TCM transmits the engine speed signal received from ECM via CAN communication to the combination
meter via CAN communication.
• The combination meter indicates the engine speed to the tachometer according to the engine speed signal
received via CAN communication.
M/T models
• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and
transmits it to the combination meter via CAN communication.
• The combination meter indicates the engine speed to the tachometer according to the engine speed signal
received via CAN communication.
SHIFT POSITION INDICATOR
SHIFT POSITION INDICATOR : System Diagram
INFOID:0000000012201302
JSNIA7198GB
JSNIA2974GB
JSNIA6671GB
Revision: November 2015
2016 JUKE
MWI
SYSTEM
MWI-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SHIFT POSITION INDICATOR : System Description
INFOID:0000000012201303
The combination meter receives the shift position signal from TCM via CAN communication, and displays the
shift position to the shift position indicator.
MANUAL MODE
When operated with CVT shift selector
• The combination meter receives the manual mode signal, non-manual mode signal, manual mode shift up
signal, and manual mode shift down signal from CVT shift selector and transmits them to TCM via CAN com-
munication.
• TCM recognizes the manual mode operation status according to the manual mode signal, non-manual mode
signal, manual mode shift up signal, and manual mode shift down signal received via CAN communication
and transmits the manual mode indicator signal to the combination meter via CAN communication.
• The combination meter indicates shift position according to the shift position signal received via CAN com-
munication.
When operated with paddle shifter
• The combination meter receives the manual mode signal from CVT shift selector, paddle shifter up signal
and paddle shifter down signal from paddle shifter and transmits them to TCM via CAN communication.
• TCM recognizes the manual mode operation status according to the manual mode signal, manual mode
shift up signal, and manual mode shift down signal received via CAN communication and transmits the shift
position signal to the combination meter via CAN communication.
• The combination meter indicates shift position according to the shift position signal via CAN communication.
NON-MANUAL MODE
• TCM transmits the shift position signal to the combination meter via CAN communication.
• The combination meter indicates shift position according to the shift position signal received via CAN com-
munication.
SHIFT REFUSAL WARNING AND ALARM
• TCM sends a manual mode shift refusal signal to the combination meter via CAN communication when shift-
up and shift-down can not be operated in manual mode.
• The combination meter blinks the shift position indicator and sounds a buzzer according to a manual mode
shift refusal signal received via CAN communication.
OIL PRESSURE WARNING LAMP
OIL PRESSURE WARNING LAMP : System Diagram
INFOID:0000000012201304
OIL PRESSURE WARNING LAMP : System Description
INFOID:0000000012201305
The combination meter turns the oil pressure warning lamp ON when receiving ECM to the oil pressure warn-
ing lamp signal via CAN communication. For details, refer to
EC-45, "Oil Pressure Warning Lamp"
NISMO RS models) or
EC-619, "Oil Pressure Warning Lamp"
(MR except for NISMO RS models).
METER ILLUMINATION CONTROL
JSNIA3115GB
Revision: November 2015
2016 JUKE
MWI-14
< SYSTEM DESCRIPTION >
SYSTEM
METER ILLUMINATION CONTROL : System Diagram
INFOID:0000000012201306
METER ILLUMINATION CONTROL : System Description
INFOID:0000000012201307
METER ILLUMINATION CONTROL FUNCTION
• Combination meter controls meter illumination, based on the following signal.
- Position light request signal
• The combination meter switches mode between Daytime mode and Nighttime mode, according to the fol-
lowing conditions.
*: For further information, refer to
INL-9, "ILLUMINATION CONTROL SYSTEM : System Description"
.
BUCK LIGHT ILLUMINATION CONTROL FUNCTION
The operation of the illumination control switch allows the brightness adjustment of meter illumination.
METER ILLUMINATION ON/OFF CONTROL FUNCTION
• Combination meter turns ON meter illumination when the following condition is satisfied:
- Ignition switch ON
• Combination meter turns OFF meter illumination when any of the following condition is satisfied:
- During a crank with vehicle speed less than 1 km/h (0.6 MPH) and ACC power supply OFF
- Ignition switch OFF or ACC power supply OFF
• The combination meter receives the following signals to control meter illumination.
METER EFFECT FUNCTION
JSNIA3378GB
Condition
Meter illumination
Combination switch
(lighting switch)
1ST or 2ND position
Nighttime mode
AUTO POSITION
Outdoor: Bright*
Daytime mode
Outdoor: Dark*
Nighttime mode
Off
Daytime mode
Meter illumination
The number of adjustable
steps
Daytime
12 step
Nighttime
12 step
Signal name
Signal path
Ignition signal
—
Engine status signal
ECM
Combination meter
Vehicle speed signal
ABS actuator and control unit (control unit)
Combination meter
Revision: November 2015
2016 JUKE
MWI
SYSTEM
MWI-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
METER EFFECT FUNCTION : System Diagram
INFOID:0000000012201308
CVT models
M/T models
METER EFFECT FUNCTION : System Description
INFOID:0000000012201309
ENGINE-START EFFECT FUNCTION
When recognizing an engine start, the combination meter controls the following items for producing the effect.
• Speedometer
• Tachometer
• Each meter pointer illumination
• Meter illumination
• Information display illumination
• Shift position indicator (CVT models)
• Start-up illumination (M/T models)
Meter and Illumination Operations During Engine-start Effect
The combination meter controls the following items during the engine-start effect.
NOTE:
The pointers are stopped and illumination is turned off while cranking the engine.
Engine Start Judgement
The combination meter judges “engine-start” and activates the engine-start effect only once when the follow-
ing operational conditions are all satisfied.
JSNIA7939GB
JSNIA7636GB
Control item
Operation
Speedometer
Sweeps the pointer.
Tachometer
Sweeps the pointer.
Each meter pointer illumination
Turns on the illumination at the effect level.
Meter illumination
Increases the brightness to the effect level in stages.
Information display illumination
Turns on the illumination at the normal brightness level.
Shift position indicator (CVT models)
Turns ON at effect level brightness after staying OFF for 2
seconds.
Start-up illumination (M/T models)
Turns ON/OFF in stages between OFF and the effect level
brightness.
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст