Nissan Pathfinder (2006 year). Manual — part 77
NAVIGATION SYSTEM
AV-107
C
D
E
F
G
H
I
J
L
M
A
B
AV
2006 Pathfinder
5.
Perform self-diagnosis by selecting the “Self-diagnosis (NAVI)”.
●
Self-diagnosis subdivision screen will be shown and the oper-
ation enters the self-diagnosis mode.
●
A bar graph will be shown on the screen to indicate progress
of the diagnosis.
6.
On the “SELF DIAGNOSIS” screen, each unit name will be col-
ored according to the diagnosis result, as follows.
●
If several malfunctions are present in a unit, color of its switch
on the screen will be either red, yellow, or gray, determined by
the malfunction of the highest priority.
7.
Select a switch on the “SELF DIAGNOSIS” screen and com-
ments for the diagnosis results will be shown.
●
When the switch is green, the following comment will be
shown. “Connection is normal. Please refer to the Confirma-
tion / Adjustment function or service manual for more detailed
diagnosis information."
●
When the switch is yellow, the following comment will be
shown. “Connection to the following unit is abnormal. See the
service manual for further details”.
●
When the switch is red, the following comment will be shown.
“Center Control Unit is abnormal”.
●
When the switch is gray, the following comment will be shown. “Self-diagnosis for DVD-ROM DRIVER
of NAVI was not conducted because no DVD-ROM was available.”
SELF–DIAGNOSIS RESULT
Quick reference table
1.
Select an malfunctioning diagnosis No. in the diagnosis result quick reference table.
2.
Find estimated malfunctioning system in the diagnosis No. table and perform check by referring to
3.
Turn the ignition switch OFF and perform self-diagnosis again.
*: Center Control unit = NAVI control unit
CAUTION:
●
When AV switch has a malfunction, you cannot start. Refer to
AV-147, "Unable to Operate All of AV
Switches (Unable to Start Self-Diagnosis)"
WKIA4440E
Green
: Not malfunctioning.
Yellow
: Cannot be judged by self-diagnosis results.
Red
: Unit is malfunctioning.
Gray
: Diagnosis has not been done.
WKIA4441E
WKIA4442E
Screen switch
Diagnosis No.
Switch color
Center control unit*
GPS antenna
Red
×
1
Gray
×
2
Yellow
×
3
×
4
×
×
5
AV-108
NAVIGATION SYSTEM
2006 Pathfinder
●
When display unit has a malfunction, you cannot start. Refer to
Self-diagnosis codes
Diagnosis
No.
Possible cause
Reference
page
1
NAVI control unit malfunction.
Refer to
2
No map DVD-ROM is inserted in the NAVI control unit.
Refer to
3
When “DVD-ROM error. Please check disc.” is shown.
1. Eject map DVD-ROM and check if it is compatible with the system.
2. Check ejected DVD-ROM for dirt, damage, and warpage.
3. If no error is found, insert a known good map DVD-ROM of the same type and perform self-diagno-
sis again. If same result is shown, the NAVI control unit is malfunctioning. If result is normal, the map
DVD-ROM is malfunctioning.
Refer to
4
If “Error found in DVD-ROM or DVD-ROM driver in control unit. Please perform diagnosis in accor-
dance with service manual” is shown, carry out same inspection as diagnosis No. 3.
Refer to
5
GPS antenna system.
1. Visually check for a broken wire in the GPS antenna coaxial cable.
2. Disconnect GPS antenna connector, and make sure approximately 5V is supplied from the NAVI
control unit. If not, the NAVI control unit is malfunctioning. If 5V is supplied, replace the GPS
antenna. If the connection is still malfunction after the replacement of the GPS antenna, the NAVI
control unit is malfunctioning.
Refer to
NAVIGATION SYSTEM
AV-109
C
D
E
F
G
H
I
J
L
M
A
B
AV
2006 Pathfinder
Confirmation/Adjustment Mode
EKS00G6S
OPERATION PROCEDURE
1.
Start the engine.
2.
Turn the audio system off.
3.
While pressing the “PAUSE/MUTE” button, turn the volume con-
trol dial clockwise or counterclockwise for 30 clicks or more.
(When the self-diagnosis mode is started, a short beep will be
heard.)
●
Shifting from current screen to previous screen is performed
by pressing “SCAN” button.
4.
The initial self-diagnosis screen will be shown, and items “Self-
Diagnosis (DCU)”, “Self-Diagnosis (NAVI)”, “Confirmation/
Adjustment” and “CAN DIAG SUPPORT MONITOR” will
become selective.
5.
When “Confirmation/Adjustment” is selected on the initial self-
diagnosis screen, the operation will enter the CONFIRMATION/
ADJUSTMENT mode. In this mode, check and adjustment of
each item will become possible.
6.
The initial trouble diagnosis screen will be shown, and items
“Display Diagnosis”, “Vehicle Signals”, “Auto Climate Control”
and “Navigation” will become selective.
7.
Select each switch on “CONFIRMATION/ADJUSTMENT”
screen to display the relevant diagnosis screen.
WKIA3249E
SKIA4207E
SKIA4220E
AV-110
NAVIGATION SYSTEM
2006 Pathfinder
DISPLAY DIAGNOSIS
●
When RGB signal error occurred in the RGB system, tone of the color bar will change as follows.
●
When the color of the screen looks unusual, refer to
AV-138, "Color of RGB Image is Not Proper (All
,
AV-139, "Color of RGB Image is Not Proper (All Screens Look Reddish)"
140, "Color of RGB Image is Not Proper (All Screens Look Yellowish)"
VEHICLE SIGNALS
●
A comparison check can be made of each actual vehicle signal
and the signals recognized by the system.
CAUTION:
In case of confirming light signal, set D/N mode to ON/OFF
of lighting switch (normal setting).
●
OFF: D (Day mode)
●
ON: N (Night mode)
Unless above setting, light signal (ON/OFF) may not be
accurately displayed.
LKIA0216E
R (red) signal error
: Screen looks bluish
G (green) signal error
: Screen looks reddish
B (blue) signal error
: Screen looks yellowish
WKIA3250E
Diagnosis item
Display
Condition
Remarks
Vehicle speed
ON
Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed by
approx. 1.5 seconds. This is normal.
OFF
Vehicle speed = 0 km/h (0 MPH)
–
Ignition switch in ACC position
Light
ON
Lighting switch ON
–
OFF
Lighting switch OFF
IGN
ON
Ignition switch ON
–
OFF
Ignition switch ACC
NAVIGATION SYSTEM
AV-111
C
D
E
F
G
H
I
J
L
M
A
B
AV
2006 Pathfinder
●
If vehicle speed is NG, refer to
AV-124, "Vehicle Speed Signal Check for Display Control Unit"
●
If light is NG, refer to
AV-125, "Illumination Signal Check for Display Control Unit"
●
AV-126, "Ignition Signal Check for Display Control Unit"
.
●
If reverse is NG, refer to
AV-126, "Reverse Signal Check for Display Control Unit"
NAVIGATION
1.
The initial confirmation/adjustment screen will be shown, and
items “Display Diagnosis”, “Vehicle Signals”, “Navigation”,
"Error History“ and "Delete Unit Connection Log” will become
selective.
2.
Select each switch on “CONFIRMATION/ADJUSTMENT”
screen to display the relevant diagnosis screen.
DISPLAY DIAGNOSIS
●
When RGB signal error occurred in the RGB system, tone of the color bar will change as follows.
●
When the color of the screen looks unusual, refer to
AV-135, "Color of RGB Image is Not Proper (Only
AV-136, "Color of RGB Image is Not Proper (Only NAVI Screen Looks Red-
AV-137, "Color of RGB Image is Not Proper (Only NAVI Screen Looks Yellowish)"
Reverse
ON
Selector lever in R position
Changes in indication may be delayed by
approx. 1.5 seconds. This is normal.
OFF
Selector lever in other than R position
–
Ignition switch in ACC position
IVCS
OFF
Not used
–
Diagnosis item
Display
Condition
Remarks
WKIA4311E
WKIA4317E
R (red) signal error
: Screen looks bluish
G (green) signal error
: Screen looks reddish
B (blue) signal error
: Screen looks yellowish
AV-112
NAVIGATION SYSTEM
2006 Pathfinder
VEHICLE SIGNALS
●
A comparison check can be made of each actual vehicle signal
and the signals recognized by the system.
CAUTION:
In case of confirming light signal, set D/N mode to ON/OFF
of light switch (normal setting).
●
OFF: D (Day mode)
●
ON: N (Night mode)
Unless mode is in above setting, light signal (ON/OFF) may
not be accurately displayed.
●
If vehicle speed is NG, refer to
AV-123, "Vehicle Speed Signal Check for NAVI Control Unit"
●
If light is NG, refer to
AV-125, "Illumination Signal Check for NAVI Control Unit"
●
If IGN is NG, refer to
AV-125, "Ignition Signal Check for NAVI Control Unit"
.
●
AV-126, "Reverse Signal Check for NAVI Control Unit"
ERROR HISTORY
DIAGNOSIS BY ERROR HISTORY
The “Self-diagnosis” results indicate whether an error occurred during the period from when the ignition switch
is turned to ON until “Self-diagnosis” is completed.
WKIA4443E
Diagnosis item
Display
Condition
Remarks
Vehicle speed
ON
Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed by
approx. 1.5 seconds. This is normal.
OFF
Vehicle speed = 0 km/h (0 MPH)
–
Ignition switch in ACC position
Lights
ON
Lighting switch ON
–
OFF
Lighting switch OFF
Ignition
ON
Ignition switch ON
–
OFF
Ignition switch ACC
Reverse
ON
Selector lever in R position
Changes in indication may be delayed by
approx. 1.5 seconds. This is normal.
OFF
Selector lever in other than R position
–
Ignition switch in ACC position
WKIA4444E
NAVIGATION SYSTEM
AV-113
C
D
E
F
G
H
I
J
L
M
A
B
AV
2006 Pathfinder
If an error occurred before the ignition switch was turned to ON and does not occur again until the “Self-diag-
nosis” is completed, the diagnosis result will be judged normal. Therefore, those errors in the past which can-
not be found by the “Self-diagnosis” must be found by diagnosing the “Error History”.
The Error History displays the time and place of the most recent occurrence of that error. However, take note
of the following points.
●
Correct time of the error occurrence may not be displayed when the GPS antenna substrate within the
NAVI control unit has malfunctioned.
●
Place of the error occurrence is represented by the position of the current-location mark at the time when
the error occurred. If the current-location mark has deviated from the correct position, then the place of
the error occurrence may be located correctly.
●
The maximum number of occurrences which can be stored is 50. For the 51st and later occurrences, the
displayed number remains 50.
When a reproducible malfunction occurred but its cause cannot be identified because several errors are
present, record the item, number and place (longitude/latitude) of error occurrence (or delete the Error His-
tory), then turn the ignition switch from OFF to ON to reproduce the malfunction. Check the Error History to
find the items which show an increased number of occurrences, and diagnose the item.
Error item
Possible causes
Example of symptom
Action/symptom
Gyro sensor
disconnected
Communications malfunction between NAVI control unit and inter-
nal gyro.
●
Navigation location detection performance
has deteriorated.
(Angular velocity cannot be detected.)
●
Perform self-diagnosis.
●
When the NAVI control unit is judged normal by self-diagnosis,
the symptom may be intermittent, caused by strong radio inter-
ference.
GPS discon-
nected
Communication error between NAVI control unit and internal GPS
substrate.
●
Navigation location detection performance
has deteriorated.
(Location correction using GPS is not per-
formed.)
●
GPS receiving status remains gray.
●
Perform self-diagnosis.
●
When the NAVI control unit is judged normal by self-diagnosis,
the symptom may be intermittent, caused by strong radio inter-
ference.
GPS trans-
mission cable
malfunction
Malfunctioning transmission wires to NAVI control unit and internal
GPS substrate.
●
During self-diagnosis, GPS diagnosis is not
performed.
●
Perform self-diagnosis.
●
When the NAVI control unit is judged normal by self-diagnosis,
the symptom may be intermittent, caused by strong radio inter-
ference.
GPS input
line connec-
tion error
Malfunctioning receiving wires to NAVI control unit and internal
GPS substrate.
●
Navigation location detection performance
has deteriorated.
(Location correction using GPS is not per-
formed.)
●
GPS receiving status remains gray.
●
Perform self-diagnosis.
●
When the NAVI control unit is judged normal by self-diagnosis,
the symptom may be intermittent, caused by strong radio inter-
ference.
GPS TCX0
over
GPS TCX0
under
Oscillating frequency of the GPS substrate frequency synchroniz-
ing oscillation circuit exceeded (or below) the specification
●
Navigation location detection performance
has deteriorated.
(Location correction using GPS is not per-
formed.)
●
GPS receiving status remains gray.
●
Perform self-diagnosis.
●
When the NAVI control unit is judged normal by self-diagnosis,
the symptom may be intermittent, caused by strong radio inter-
ference, or the control unit may have been subjected to exces-
sively high or low temperatures.
GPS ROM
malfunction
GPS RAM
malfunction
Contents of ROM (or RAM) in GPS substrate are malfunctioning.
●
Location detection accuracy of the navigation
system will deteriorate, depending on the error
area in the memory, because GPS cannot
make correct positioning.
(Location correction using GPS is not per-
formed.)
●
Perform self-diagnosis.
●
When the NAVI control unit is judged normal by self-diagnosis,
the symptom may be intermittent, caused by strong radio inter-
ference.
AV-114
NAVIGATION SYSTEM
2006 Pathfinder
NAVIGATION
1.
The navigation screen will be shown, and items “Display Longi-
tude & Latitude”, “Speed Calibration”, “Angle Adjustment” and
“Initialize Location” will become selective.
2.
Select each switch on “NAVIGATION” screen to display the rele-
vant diagnosis screen.
GPS RTC
malfunction
Clock IC in GPS substrate is malfunctioning.
●
Correct time may not be displayed.
●
After the power is turned on, the system
always takes some time until GPS positioning
becomes possible. (The GPS receiver starts
positioning without re-collecting the whole sat-
ellite information when it judged the data
stored in the receiver is correct.)
●
Correct time of error occurrence may not be
stored in the
″
Error History
″
.
●
Perform self-diagnosis.
●
When the NAVI control unit is judged normal by self-diagnosis,
the symptom may be intermittent, caused by strong radio inter-
ference.
GPS antenna
disconnected
Malfunctioning connection between GPS substrate in NAVI control
unit and GPS antenna.
●
Navigation location detection performance
has deteriorated.
(Location correction using GPS is not per-
formed.)
●
GPS receiving status remains gray.
●
Perform self-diagnosis.
●
When connection between NAVI control unit and GPS antenna
is judged normal by self-diagnosis, the symptom may be inter-
mittent, caused by impact or vibration.
Low voltage
of GPS
The power voltage supplied to the GPS circuit board has
decreased.
●
Navigation location detection performance
has deteriorated.
(Location correction using GPS is not per-
formed.)
●
GPS receiving status remains gray.
●
Perform self-diagnosis.
●
When connection between NAVI control unit and GPS antenna
is judged normal by self-diagnosis, the symptom may be inter-
mittent, caused by impact or vibration.
DVD-ROM
Malfunction
DVD-ROM
Read error
DVD-ROM
Response
Error
Malfunctioning NAVI control unit.
-
Dedicated map DVD-ROM is in the system, but the data cannot be
read.
●
The map of a particular location cannot be dis-
played.
●
Specific guidance information cannot be dis-
played.
●
Map display is slow.
●
Guidance information display is slow.
●
System has been affected by vibration.
●
Is map DVD-ROM damaged, warped, or dirty?
–
If damaged or warped, the map DVD-ROM is malfunctioning.
–
If dirty, wipe the DVD-ROM clean with a soft cloth.
●
Perform self-diagnosis.
●
When NAVI control unit is judged normal by self-diagnosis, the
symptom is judged intermittent, caused by vibration.
Error item
Possible causes
Example of symptom
Action/symptom
WKIA4312E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст