Nissan Murano Z51 (2008 year). Manual — part 93
DLK-20
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
POWER DOOR LOCK SYSTEM
Component Parts Location
INFOID:0000000003443645
Component Description
INFOID:0000000003443646
1.
BCM M118, M119, M121, M122, M123
2.
TCM F23
3.
Combination meter M34
4.
Key slot M99
5.
Front door lock assembly (driver side)
(door key cylinder switch) D9
6.
Power window main switch
(door lock and unlock switch) D5,
D6
7.
Front power window switch (passenger
side)
(door lock and unlock switch) D45
8.
Front door switch (driver side) B34
9.
Front door lock assembly (driver
side) (door lock actuator) D9
A.
Behind the combination meter
B.
Engine room LH
C.
View with front door finisher re-
moved
JMKIA1889ZZ
Item
Function
BCM
Controls the door lock function and room lamp function.
Door lock and unlock switch
Input lock or unlock signal to BCM.
Revision: 2008 October
2009 Murano
POWER DOOR LOCK SYSTEM
DLK-21
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Door lock actuator
Output lock/unlock signal from BCM and locks/unlocks each door.
Door switch
Input door open/close condition to BCM.
Door key cylinder switch
• Input lock or unlock signal to power window main switch.
• Power window main switch transmits door lock/unlock signal to BCM.
Key slot
Input key insert/remove signal to BCM.
Combination meter
• Receive buzzer signal from BCM via CAN communication line, and sounds the buzzer.
• Transmits vehicle speed signal to CAN communication line.
TCM
Transmit shift position signal to BCM via CAN communication line.
Push-button ignition switch
Input push-button ignition switch ON/OFF condition to BCM.
Item
Function
Revision: 2008 October
2009 Murano
DLK-22
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
INTELLIGENT KEY SYSTEM
INTELLIGENT KEY SYSTEM
INTELLIGENT KEY SYSTEM : System Diagram
INFOID:0000000003443675
INTELLIGENT KEY SYSTEM : System Description
INFOID:0000000003443676
• The Intelligent Key system is a system that makes it possible to lock and unlock the door locks (door lock/
unlock function) by carrying the Intelligent Key, which operates based on the results of electronic ID verifica-
tion using two-way communications between the Intelligent Key and the vehicle (BCM).
CAUTION:
The driver should always carry the Intelligent Key
• The settings for each function can be changed with the CONSULT-III.
• If an Intelligent Key is lost, a new Intelligent Key can be registered. A maximum of 4 Intelligent Keys can be
registered.
• It is possible to perform a diagnosis on the system and register an Intelligent Key with the CONSULT-III.
JMKIA1992GB
Function
Description
Refer
Door lock function
Lock/unlock can be performed by pressing the request switch.
Remote keyless entry func-
tion
Lock/unlock can be performed by pressing the remote controller button of the In-
telligent Key.
Back door open function
The back door can be opened by carrying the Intelligent Key and pressing the
back door opener switch.
Key reminder function
The key reminder buzzer sounds a warning if the door is locked with the key left
inside the vehicle.
Warning function
If an action that does not meet the operating condition of the Intelligent Key sys-
tem is taken, the buzzer goes off to inform the driver.
Engine start function
The engine be turned on while carrying the Intelligent Key.
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-23
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY SYSTEM : Component Parts Location
INFOID:0000000003443677
1.
BCM M118, M119, M120, M121, M122,
M123
2.
TCM F23
3.
Intelligent key warning buzzer E25
4.
IPDM E/R E10, E11
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
Control device (detention switch) M57
9.
Inside key antenna (instrument
center) M105
JMKIA1932ZZ
Revision: 2008 October
2009 Murano
DLK-24
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
INTELLIGENT KEY SYSTEM : Component Description
INFOID:0000000003443678
10. Inside key antenna (console) M262
11.
Inside key antenna (luggage room)
B86
12.
Front outside handle LH (outside
key antenna) D12
13. Front outside handle LH (request switch)
D11
14.
Outside key antenna (rear bumper)
B85
15.
Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the cluster lid C assembly
F.
Under the rear seat seatback
G.
View with rear bumper removed
JMKIA1933ZZ
1.
Back door lock assembly
With automatic back door: D179
Without automatic back door: D180
2.
Front door lock assembly (driver side) D9
3.
Rear door lock assembly LH D85
4.
Automatic back door control unit B7, B8
5.
Back door opener switch assembly (open-
er switch) D186
6.
Back door opener switch assembly
(request switch) D186
7.
Intelligent Key
A.
View with front door finisher removed
B.
View with rear door finisher removed
C. Behind the luggage side finisher
lower (LH)
Item
Function
BCM
Controls the Intelligent Key system.
Door lock actuator
Output lock/unlock signal from BCM and locks/unlocks each door.
Door switch
Input door open/close condition to BCM.
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM.
Request switch
Input lock/unlock operation to BCM.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Outside key antenna
Detects if Intelligent Key is outside the vehicle.
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-25
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK FUNCTION
DOOR LOCK FUNCTION : System Diagram
INFOID:0000000003443647
DOOR LOCK FUNCTION : System Description
INFOID:0000000003443648
Only when pressing the door request switch, it is possible to lock and unlock the door by carrying the Intelli-
gent Key.
OPERATION DESCRIPTION
• When the BCM detects that each door request switch is pressed, it starts the outside key antenna and inside
key antenna corresponding to the pressed door request switch and transmits the request signal to the Intelli-
gent Key. And then, check that the Intelligent Key is near the door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM lock/unlock each door (except back door) and sounds Intelligent Key buzzer warning (lock: 2 time,
unlock: 1 times) at the same time as a reminder.
OPERATION CONDITION
If the following conditions are satisfied, door lock/unlock operation is performed if the request switch is oper-
ated.
*: Even with a registered Intelligent Key remaining inside the vehicle, door locks can be unlocked from outside of the vehicle with a spare
Intelligent Key as long as key IDs are different.
OUTSIDE KEY ANTENNA DETECTION AREA
Inside key antenna
Detects if Intelligent Key is inside the vehicle.
Intelligent Key warning buzzer
Warns the user of the lock/unlock condition and inappropriate operations with the buzzer sound.
Item
Function
JMKIA1993GB
Each request switch operation
Operation condition
Lock operation
• All doors are closed
• Ignition switch is in OFF position
• Intelligent Key is out of key slot
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area
Unlock Operation
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area *
Revision: 2008 October
2009 Murano
DLK-26
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
The outside key antenna detection area of door lock/unlock function
is in the range of approximately 80 cm (31.50 in) surrounding the
driver, passenger door handles and (1) and the back door request
switch (2). However, this operating range depends on the ambient
conditions.
SELECTIVE UNLOCK FUNCTION
When an LOCK signal is sent from door request switch (driver side or passenger side), all doors will be locked.
When an UNLOCK signal is sent from door request switch (driver side or passenger side) once, driver's door
will be unlocked.
Then, if an UNLOCK signal is sent from door request switch (driver side and passenger side) again within 60
seconds, all other door will be unlocked.
HAZARD AND BUZZER REMINDER FUNCTION
During lock, unlock, operation by each request switch, the hazard warning lamps and Intelligent Key warning
buzzer will blink or honk as a reminder.
When doors are locked, unlocked by each request switch, BCM honks Intelligent Key warning buzzer as a
reminder and blinks.
Operating Function of Hazard and Buzzer Reminder
How to Change Hazard and Buzzer Reminder Mode
DLK-61, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
AUTO DOOR LOCK FUNCTION
When all doors are locked, ignition switch is in OFF position and key switch is OFF (Intelligent Key is not
inserted in key slot), doors are unlocked with door request switch
When BCM does not receive the following signals within 60 seconds, all doors are locked.
• Door switch is ON (door is opened)
• Door is locked
• Ignition switch is ON (push-button ignition switch is pressed)
• Key switch is ON (Intelligent Key is inserted in key slot)
Auto door lock mode can be changed by “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
"INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
JMKIA1954ZZ
Operation
Hazard warning lamp blink
Intelligent Key warning buzzer honk
Unlock
Once
Once
Lock
Twice
Twice
Door lock function
In
tel
lig
en
t Ke
y
Key slot
Re
mo
te
ke
yl
es
s en
try rec
e
ive
r
Do
or sw
itch
Do
or re
qu
es
t sw
it
ch
Do
or l
o
c
k
ac
tu
a
to
r
In
si
de ke
y an
ten
na
O
ut
s
id
e ke
y
a
nt
en
na
In
tel
lig
en
t Ke
y
warn
ing
b
u
zze
r
CAN co
mm
un
ic
ati
o
n
sys
tem
BCM
Hazard warning lamp
Pu
sh
-bu
tton
i
gni
tio
n
swit
ch
Co
mb
in
at
ion
me
te
r
Door lock/unlock function by door request switch
×
×
×
×
×
×
×
×
×
Hazard and buzzer reminder function for door lock/un-
lock operation
×
×
×
×
×
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-27
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Key reminder function
×
×
×
×
×
×
×
×
×
×
×
Selective unlock function by request switch
(Driver side)
×
×
×
×
×
×
Selective unlock function by request switch
(Passenger side)
×
×
×
×
×
×
Selective unlock function by request switch (back door)
×
×
×
×
×
Auto door lock function
×
×
×
×
×
×
×
Door lock function
Int
e
llig
en
t Ke
y
Ke
y sl
ot
Re
mo
te ke
yl
es
s e
n
try re
cei
v
er
Door switch
Do
or re
qu
es
t s
w
it
c
h
Do
or l
o
c
k
ac
tu
a
to
r
In
si
de
k
ey
an
te
nn
a
Ou
tsi
d
e
ke
y an
ten
n
a
Int
e
llig
en
t Ke
y
wa
rni
n
g
bu
zze
r
CAN co
mm
un
ic
ati
o
n
sy
stem
BCM
Hazard warning lamp
Push-b
ut
ton
ig
ni
tio
n
swit
ch
Com
b
inat
io
n m
e
te
r
Revision: 2008 October
2009 Murano
DLK-28
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
DOOR LOCK FUNCTION : Component Parts Location
INFOID:0000000003523740
1.
BCM M118, M119, M120, M121, M122,
M123
2.
TCM F23
3.
Intelligent key warning buzzer E25
4.
IPDM E/R E10, E11
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
Control device (detention switch) M57
9.
Inside key antenna (instrument
center) M105
JMKIA1932ZZ
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-29
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK FUNCTION : Component Description
INFOID:0000000003443650
10. Inside key antenna (console) M262
11.
Inside key antenna (luggage room)
B86
12.
Front outside handle LH (outside
key antenna) D12
13. Front outside handle LH (request switch)
D11
14.
Outside key antenna (rear bumper)
B85
15.
Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the cluster lid C assembly
F.
Under the rear seat seatback
G.
View with rear bumper removed
JMKIA1933ZZ
1.
Back door lock assembly
With automatic back door: D179
Without automatic back door: D180
2.
Front door lock assembly (driver side) D9
3.
Rear door lock assembly LH D85
4.
Automatic back door control unit B7, B8
5.
Back door opener switch assembly (open-
er switch) D186
6.
Back door opener switch assembly
(request switch) D186
7.
Intelligent Key
A.
View with front door finisher removed
B.
View with rear door finisher removed
C. Behind the luggage side finisher
lower (LH)
Item
Function
BCM
Controls the door lock function.
Door lock actuator
Output lock/unlock signal from BCM and locks/unlocks each door.
Door switch
Input door open/close condition to BCM.
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM.
Door request switch
Input lock/unlock operation to BCM.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Outside key antenna
Detects if Intelligent Key is outside the vehicle.
Inside key antenna
Detects if Intelligent Key is inside the vehicle.
Revision: 2008 October
2009 Murano
DLK-30
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
BACK DOOR OPEN FUNCTION
BACK DOOR OPEN FUNCTION : System Diagram
INFOID:0000000003497494
BACK DOOR OPEN FUNCTION : System Description
INFOID:0000000003497495
This section describes the operation of the back door opener switch. The operation of the back door request
switch is the same as the door lock function. Refer to
DLK-25, "DOOR LOCK FUNCTION : System Descrip-
.
• The back door opener function can open the back door by pressing the back door opener switch while carry-
ing the Intelligent Key. At this time, all doors other than the back door are locked.
• The back door opener function can open the back door by pressing the back door opener switch with all
doors unlocked by the door request switch or Intelligent Key.
for the automatic back door operation.
BACK DOOR OPEN
• When the BCM detects that back door opener switch is pressed, it starts the outside key antenna (back
door) and inside key antenna and transmits the request signal to the Intelligent Key. And then, check that the
Intelligent Key is near the back door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM open the back door and sounds Intelligent Key buzzer warning at the same time as a reminder.
OPERATION CONDITION
If the following conditions are satisfied, the back door can be opened.
• Back door is closed
• Ignition switch is in off position
• Intelligent Key is out of key slot
• Intelligent Key is outside of vehicle
• Intelligent Key is within out side key antenna detection area
OUTSIDE KEY ANTENNA DETECTION AREA
Combination meter
Receives hazard warning lamp signal from BCM and blinks turn signal indicators.
Intelligent Key warning buzzer
Warns the user of the lock/unlock condition and inappropriate operations with the buzzer sound.
Item
Function
JMKIA1994GB
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-31
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
The outside key antenna detection area of back door open function
is in the range of approximately 80 cm (31.50 in) surrounding the
back door opener switch (1). However, this operating range depends
on the ambient conditions.
HAZARD AND BUZZER REMINDER FUNCTION
Back door opening operation by back door opener switch, the hazard warning lamps and buzzer will blink or
honk as a reminder.
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
JMKIA1955ZZ
Door lock function
In
te
llige
n
t Key
Ke
y s
lo
t
Re
mo
te
ke
yl
es
s en
try rec
e
iv
e
r
Do
or swit
ch
Do
or requ
es
t
s
w
it
ch
Do
or loc
k
ac
tua
to
r
In
si
de
ke
y an
ten
n
a
Out
si
d
e ke
y a
n
te
n
n
a
(Rea
r bu
mp
er)
In
te
llige
n
t Key
wa
rnin
g
bu
zz
er
CAN co
mm
un
ic
ati
o
n
s
y
s
tem
BC
M
Hazard w
a
rning
lamp
Ba
ck
do
or op
en
er s
w
it
c
h
Back door open function by back door opener switch
(Carrying Intelligent Key)
×
×
×
×
×
×
×
×
×
×
×
Hazard and buzzer reminder function for door lock/unlock
operation
×
×
×
×
Revision: 2008 October
2009 Murano
DLK-32
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
BACK DOOR OPEN FUNCTION : Component Parts Location
INFOID:0000000003523741
1.
BCM M118, M119, M120, M121, M122,
M123
2.
TCM F23
3.
Intelligent key warning buzzer E25
4.
IPDM E/R E10, E11
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
Control device (detention switch) M57
9.
Inside key antenna (instrument
center) M105
JMKIA1932ZZ
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-33
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR OPEN FUNCTION : Component Description
INFOID:0000000003497497
10. Inside key antenna (console) M262
11.
Inside key antenna (luggage room)
B86
12.
Front outside handle LH (outside
key antenna) D12
13. Front outside handle LH (request switch)
D11
14.
Outside key antenna (rear bumper)
B85
15.
Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the cluster lid C assembly
F.
Under the rear seat seatback
G.
View with rear bumper removed
JMKIA1933ZZ
1.
Back door lock assembly
With automatic back door: D179
Without automatic back door: D180
2.
Front door lock assembly (driver side) D9
3.
Rear door lock assembly LH D85
4.
Automatic back door control unit B7, B8
5.
Back door opener switch assembly (open-
er switch) D186
6.
Back door opener switch assembly
(request switch) D186
7.
Intelligent Key
A.
View with front door finisher removed
B.
View with rear door finisher removed
C. Behind the luggage side finisher
lower (LH)
Item
Function
BCM
Controls the back door open function and room lamp function.
Back door opener switch
Input press/degrees signal to BCM.
Door lock actuator
Receives lock/unlock signal from BCM and locks/unlocks each door.
Door switch
Input door open/close condition to BCM.
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM.
Request switch (back door)
Input lock/unlock operation to BCM.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Outside key antenna (rear bumper)
Detects if Intelligent Key is outside the vehicle.
Revision: 2008 October
2009 Murano
DLK-34
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
INFOID:0000000003443651
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000003443652
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the Intelligent Ke by operating the door lock/unlock button.
OPERATION
Remote keyless entry system controls operation of the
• Door lock/unlock
• Automatic back door open
• Selective unlock
• Hazard and horn reminder
• Auto door lock
• Panic alarm
• Power window down
OPERATION AREA
To ensure the Intelligent Key works effectively, use within 1 m (3 ft) range of each doors, however the operable
range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal is transmits from
Intelligent Key to BCM via remote keyless entry receiver.
• When BCM receives the door lock/unlock signal, it operates door lock actuator, flashes the hazard warning
lamp (lock: 2 time, unlock: 1 times) and horn chirp signal to IPDM E/R at the same time as a reminder.
• IPDM E/R honks horn (lock: 2 time) as a reminder
OPERATION CONDITION
Inside key antenna
Detects if Intelligent Key is inside the vehicle.
Intelligent Key warning buzzer
Warns the user of the back door open/close condition and inappropriate operations with the
buzzer sound.
Automatic back door control unit
Controls back door open/close automatically.
Item
Function
JMKIA1995GB
Remote controller operation
Operation condition
Operation
Lock
• All doors closed
All doors lock
Unlock
• Intelligent Key is out of key slot
All doors unlock
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-35
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTOMATIC BACK DOOR OPEN FUNCTION
When back door button of Intelligent Key is pressed for more than 1 second, back door open automatically for
detailed description, refer to
.
SELECTIVE UNLOCK FUNCTION
When an LOCK signal is transmitted from Intelligent Key, all doors will be locked.
When an UNLOCK signal is transmitted from Intelligent Key once, driver's door will be unlocked.
Then, if an UNLOCK signal is transmitted from Intelligent Key again within 60 seconds, all other door will be
unlocked.
HAZARD AND HORN REMINDER FUNCTION
When doors are locked or unlocked by Intelligent Key, BCM flashes hazard warning lamps as a reminder.
The hazard and horn reminder has a horn chirp mode (C mode) and a non-horn chirp mode (S mode).
Operating Function of Hazard and Horn Reminder
Hazard and horn reminder does not operate if any door switch is ON (any door is OPEN).
How to Change Hazard and Horn Reminder Mode
With CONSULT-III
DLK-61, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Without CONSULT-III
When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 2 seconds at the same time,
the hazard and horn reminder mode is changed and hazard warning lamp blinks and horn sounds as follows:
AUTO DOOR LOCK FUNCTION
When all doors are locked, ignition switch is OFF (ignition switch is not pressed) and key switch is OFF (Intel-
ligent Key is not inserted in key slot), doors are unlocked with Intelligent Key button. When BCM does not
receive the following signals within 30 seconds, all doors are locked.
• Door switch is ON (door is opened)
• Door is locked
• Ignition switch is ON
• Key switch is ON (Intelligent Key is inserted in key slot)
Auto door lock mode can be changed by “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
"INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
PANIC ALARM FUNCTION
When ignition switch is OFF (ignition switch is not pressed) and key switch is OFF (Intelligent Key is not
inserted in key slot), BCM receives PANIC ALARM signal from Intelligent Key.
BCM turns on and off headlamp intermittently and transmits theft warning horn signal to IPDM E/R. Then,
IPDM E/R turns on and off horn intermittently.
The headlamp blinks and the horn sounds intermittently.
The alarm automatically turns off:
• After 25 seconds
• When BCM receives any signal from Intelligent Key
Panic alarm function mode can be changed by “PANIC ALARM SET” mode in “WORK SUPPORT”. Refer to
DLK-61, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
C mode
S mode
Intelligent Key operation
Lock
Unlock
Lock
Unlock
Hazard warning lamp blink
Twice
Once
Twice
—
Horn sound
Once
—
—
—
JMKIA2755GB
Revision: 2008 October
2009 Murano
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст