Nissan Murano Z51 (2008 year). Manual — part 94
DLK-36
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
KEYLESS POWER WINDOW DOWN (OPEN) FUNCTION
All power windows open when the unlock button on Intelligent Key is activated and kept pressed for more than
3 seconds with the ignition switch OFF. The windows keep opening if the unlock button is continuously
pressed.
The power window opening stops when the following operations are performed:
• When the unlock button is kept pressed more than 15 seconds.
• When the ignition switch is turned ON while the power window opening is operated.
• When the unlock button is released.
While retained power operation activate, Keyless power window down (open) function cannot be operated.
Keyless power window down operation mode can be changed by “PW DOWN SET” mode in “WORK SUP-
PORT”. Refer to
DLK-61, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
Remote keyless entry functions
Int
e
llig
en
t Ke
y
Ke
y sl
o
t
Do
or re
qu
es
t
s
w
it
c
h
Doo
r swi
tch
Doo
r lo
ck actu
ato
r
CAN c
o
m
m
un
ica
ti
o
n sy
st
em
BCM
Com
b
in
at
ion
m
e
te
r
Hazard warning lamp
Horn
IPDM
E/R
Head lamp
Power window switch
Door lock/unlock function by remote control button
×
×
×
×
×
Hazard and horn reminder function
×
×
×
×
×
×
×
Selective unlock function
×
×
×
×
Keyless power window down (open) function
×
×
×
×
Auto door lock function
×
×
×
×
Panic alarm function
×
×
×
×
×
×
×
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-37
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY FUNCTION : Component Parts Location
INFOID:0000000003523742
1.
BCM M118, M119, M120, M121, M122,
M123
2.
TCM F23
3.
Intelligent key warning buzzer E25
4.
IPDM E/R E10, E11
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
Control device (detention switch) M57
9.
Inside key antenna (instrument
center) M105
JMKIA1932ZZ
Revision: 2008 October
2009 Murano
DLK-38
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
REMOTE KEYLESS ENTRY FUNCTION : Component Description
INFOID:0000000003443654
KEY REMINDER FUNCTION
10. Inside key antenna (console) M262
11.
Inside key antenna (luggage room)
B86
12.
Front outside handle LH (outside
key antenna) D12
13. Front outside handle LH (request switch)
D11
14.
Outside key antenna (rear bumper)
B85
15.
Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the cluster lid C assembly
F.
Under the rear seat seatback
G.
View with rear bumper removed
JMKIA1933ZZ
1.
Back door lock assembly
With automatic back door: D179
Without automatic back door: D180
2.
Front door lock assembly (driver side) D9
3.
Rear door lock assembly LH D85
4.
Automatic back door control unit B7, B8
5.
Back door opener switch assembly (open-
er switch) D186
6.
Back door opener switch assembly
(request switch) D186
7.
Intelligent Key
A.
View with front door finisher removed
B.
View with rear door finisher removed
C. Behind the luggage side finisher
lower (LH)
Item
Function
BCM
Controls the door lock function and room lamp function.
Door lock actuator
Outputs lock/unlock signal from BCM and locks/unlocks each door.
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-39
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY REMINDER FUNCTION : System Description
INFOID:0000000003443669
Key reminder is the function that prevents the key from being left in the vehicle.
Key reminder has the following 3 functions.
*:If the door closing impact shocks the door lock knob, or contacts against baggage with the door lock knob might activate the door locks
accidentally but unlock operation will be perform in these cases.
CAUTION:
• The above function operates when the Intelligent Key is inside the vehicle. However, there may be
times when the Intelligent Key cannot be detected, and this function will not operate when the Intelli-
gent Key is on the instrument panel, or in the glove box. Also, this system sometimes does not oper-
ate if the Intelligent Key is in the door pocket for the open door.
• Key reminder function is operated when the back door is open/closed and the buzzers sound, if the
following operations are performed, the key reminder function is cleared and buzzer sounds are
stopped.
- Remote controller door lock button operation of Intelligent Key
- Remote controller door unlock button operation of Intelligent Key
- When the back door is closed, the Intelligent Key is not inside the vehicle
- When any door is open
JMKIA1996GB
Key remainder function
Operation condition
Operation
Driver door closed*
Right after driver side door is closed under the following conditions
• Door lock operation is performed
• Driver side door is opened
• Driver side door is in lock state
All doors unlock
Door is open or closed
Right after all doors are closed under the following conditions
• Intelligent Key is inside the vehicle
• Any door is opened
• All doors are locked by door lock and unlock switch or door lock knob
• All doors unlock
• Honk Intelligent Key warning
buzzer
Back door is closed
Right after back door is closed under the following conditions
• Intelligent Key is inside vehicle
• All doors (except back door) are closed
• All doors (except back door) are locked
• All doors unlock
• Back door can open with
back door opener switch
• Honk Intelligent Key warning
buzzer
Revision: 2008 October
2009 Murano
DLK-40
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
KEY REMINDER FUNCTION : Component Parts Location
INFOID:0000000003523750
1.
BCM M118, M119, M120, M121, M122,
M123
2.
TCM F23
3.
Intelligent key warning buzzer E25
4.
IPDM E/R E10, E11
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
Control device (detention switch) M57
9.
Inside key antenna (instrument
center) M105
JMKIA1932ZZ
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-41
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WARNING FUNCTION
WARNING FUNCTION : System Description
INFOID:0000000003443667
OPERATION DESCRIPTION
The warning function are as follows and are given to the user as warning information and warnings using com-
binations of Intelligent Key warning buzzer, KEY warning lamp, key slot illumination and information display in
combination meter.
• Intelligent Key system malfunction
• OFF position warning
• P position warning
• ACC warning
• Take away warning
• Door lock operation warning
• Key warning
10. Inside key antenna (console) M262
11.
Inside key antenna (luggage room)
B86
12.
Front outside handle LH (outside
key antenna) D12
13. Front outside handle LH (request switch)
D11
14.
Outside key antenna (rear bumper)
B85
15.
Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the cluster lid C assembly
F.
Under the rear seat seatback
G.
View with rear bumper removed
JMKIA1933ZZ
1.
Back door lock assembly
With automatic back door: D179
Without automatic back door: D180
2.
Front door lock assembly (driver side) D9
3.
Rear door lock assembly LH D85
4.
Automatic back door control unit B7, B8
5.
Back door opener switch assembly (open-
er switch) D186
6.
Back door opener switch assembly
(request switch) D186
7.
Intelligent Key
A.
View with front door finisher removed
B.
View with rear door finisher removed
C. Behind the luggage side finisher
lower (LH)
Revision: 2008 October
2009 Murano
DLK-42
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
• Intelligent Key insert information
• Engine start information
• Steering lock information
• Intelligent key low battery warning
• Key ID warning
OPERATION CONDITION
Once the following condition from below is established, alert or warning will be executed.
Warning/Information functions
Operation procedure
Intelligent Key system malfunction
When a malfunction is detected on BCM, “KEY” warning lamp will illuminate.
OFF position warning
For internal
• Ignition switch: ACC position.
• Door switch (driver side): ON (Door is open).
For external
OFF position warning (For internal) is in active mode, driver side door has
been closed.
NOTE:
OFF position (For external) active only when each of the sequence has oc-
curred as below: P position warning
→
ACC warning
→
OFF position warning
(For internal)
→
OFF position warning (For internal)
P position warning
• Shift position: Except P position.
• Engine is running to stopped (Ignition switch is ON to OFF).
ACC warning
• During P position warning is in active mode, shift position has changed P po-
sition.
• Ignition switch: ACC position.
Take away warning
Door is open to close
• Ignition switch: Except LOCK position.
• Door switch: ON to OFF (Door is open to close).
• Intelligent Key can not be detected inside the vehicle.
Door is open
• Door switch: ON (Door is open).
• Key ID verification every 5 seconds when registered Intelligent Key can not
be detected inside the vehicle.
Push button-ignition
switch operation
• Ignition switch: Except LOCK position.
• Press push-button ignition switch.
• Intelligent Key can not be detected inside the vehicle.
Take away through win-
dow
• Engine is running.
• Key ID verification every 30 seconds when registered Intelligent Key can not
be detected inside the vehicle.
• After vehicle speed verification, the registered Intelligent Key can not be de-
tect inside the vehicle.
Intelligent Key is removed
from key slot
• When Intelligent Key is removed from key slot, Intelligent Key can not be de-
tected inside the vehicle.
Door lock operation warn-
ing
Request switch operation
When request switch is pushed (lock operation) under the following conditions.
• All door is closed.
• All door is unlocked.
• Intelligent Key is inside vehicle.
Intelligent Key button op-
eration
When Intelligent Key button is pushed (lock operation) under the following con-
ditions.
• Door switch: ON (Any door is open).
• For 3 seconds after Intelligent Key is removed from key slot.
Key warning
• Ignition switch is OFF position.
• Driver side door switch: ON (Driver side door is open).
• Intelligent Key is inserted in key slot.
Intelligent Key insert information
• Door switch: ON to OFF (Door is open to close).
• Ignition switch: OFF to ON position.
• Intelligent Key is out of key slot.
• Intelligent Key can not be detected inside the vehicle.
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-43
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WARNING METHOD
The following table shows the alarm or warning methods with chime.
Information display (combination meter), “KEY” indicator or key slot illumination when the warning conditions
are met.
Engine start information
Ignition switch is ON posi-
tion
• Ignition switch: ON position.
• Shift position: P position.
• Engine is stopped.
Ignition switch is except
ON position
• Ignition switch: Except ON position.
• Shift position: P position.
• Intelligent Key is inserted in key slot or Intelligent Key can be detected inside
the vehicle.
Steering lock information
When steering lock can not be released after ignition switch is turned ON.
Intelligent Key low battery warning
When Intelligent Key is low battery, BCM is detected after ignition switch is
turned ON.
Key ID warning
When registered intelligent Key can not be detected inside the vehicle after ig-
nition switch is turned ON.
Warning/Information functions
Operation procedure
Warning/Information functions
“KEY” warn-
ing lamp
Information display
(combination meter)
Key slot il-
lumination
Warning chime
Combination
meter buzzer
Intelligent
Key warning
buzzer
Intelligent Key system malfunction
Illuminate
—
—
—
—
OFF position warn-
ing
For internal
—
—
—
Activate
—
For external
—
—
—
—
Activate
P position warning
—
—
Activate
—
ACC warning
—
—
—
—
Take away warning
Door is open to
close
—
Blink
Activate
Activate
Door is open
—
Flash
—
—
Push-ignition
switch operation
—
Flash
Activate
—
Take away
through window
—
Flash
Activate
—
Intelligent Key is
removed from
key slot
—
Flash
—
—
Door lock operation
warning
Request switch
operation
—
—
—
—
Activate
Intelligent Key
operation
—
—
—
—
Activate
JMKIA0037GB
JMKIA0047GB
JMKIA0036GB
Revision: 2008 October
2009 Murano
DLK-44
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
Key ID warning
—
—
—
—
Key warning
—
Flash
Activate
—
Intelligent Key insert information
—
Flash
—
—
Engine start information
—
—
—
—
Steering lock information
—
—
—
—
Intelligent Key low battery warning
—
—
—
—
Warning/Information functions
“KEY” warn-
ing lamp
Information display
(combination meter)
Key slot il-
lumination
Warning chime
Combination
meter buzzer
Intelligent
Key warning
buzzer
JMKIA0036GB
JMKIA0035GB
JMKIA0034GB
JMKIA0032GB
JMKIA0033GB
JMKIA0048GB
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-45
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Warning function
In
te
lli
gen
t K
e
y
Ke
y slo
t
Ig
ni
tio
n
switch
Do
or swi
tch
Doo
r re
qu
es
t s
w
itc
h
In
si
de
ke
y an
ten
n
a
Ou
ts
id
e k
ey
a
nt
e
nn
a
In
te
lli
gen
t K
e
y warn
in
g b
u
zze
r
Co
mbi
n
at
io
n
m
e
te
r wa
rn
in
g
b
u
zz
er
CAN communication
system
BCM
Com
b
ina
tio
n me
ter dis
p
la
y
Ke
y slo
t
illu
mi
na
tio
n
Pa
rk pos
it
ion
s
w
itc
h
“KEY
” warning lamp
Intelligent Key system malfunction
×
×
×
OFF position warning
For internal
×
×
×
×
For external
×
×
×
P position warning
×
×
×
×
×
×
ACC warning
×
×
×
×
×
×
Take away warning
Door is open or close
×
×
×
×
×
×
×
×
×
Door is open
×
×
×
×
×
×
×
Push-ignition switch oper-
ation
×
×
×
×
×
×
×
×
Take away through win-
dow
×
×
×
×
×
×
×
Intelligent Key is removed
from key slot
×
×
×
×
×
×
×
Door lock operation warning
×
×
×
×
×
×
×
×
Key ID warning
×
×
×
×
×
×
×
Key warning
×
×
×
×
×
×
×
×
Intelligent Key insert information
×
×
×
×
×
×
×
×
×
Engine start information
Ignition switch is ON posi-
tion
×
×
×
×
×
×
×
×
Ignition switch is except
ON position
×
×
×
×
×
×
×
Steering lock information
×
×
×
×
Intelligent Key low battery warning
×
×
×
×
×
Revision: 2008 October
2009 Murano
DLK-46
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
WARNING FUNCTION : Component Parts Location
INFOID:0000000003523751
1.
BCM M118, M119, M120, M121, M122,
M123
2.
TCM F23
3.
Intelligent key warning buzzer E25
4.
IPDM E/R E10, E11
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
Control device (detention switch) M57
9.
Inside key antenna (instrument
center) M105
JMKIA1932ZZ
Revision: 2008 October
2009 Murano
INTELLIGENT KEY SYSTEM
DLK-47
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
10. Inside key antenna (console) M262
11.
Inside key antenna (luggage room)
B86
12.
Front outside handle LH (outside
key antenna) D12
13. Front outside handle LH (request switch)
D11
14.
Outside key antenna (rear bumper)
B85
15.
Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the cluster lid C assembly
F.
Under the rear seat seatback
G.
View with rear bumper removed
JMKIA1933ZZ
1.
Back door lock assembly
With automatic back door: D179
Without automatic back door: D180
2.
Front door lock assembly (driver side) D9
3.
Rear door lock assembly LH D85
4.
Automatic back door control unit B7, B8
5.
Back door opener switch assembly (open-
er switch) D186
6.
Back door opener switch assembly
(request switch) D186
7.
Intelligent Key
A.
View with front door finisher removed
B.
View with rear door finisher removed
C. Behind the luggage side finisher
lower (LH)
Revision: 2008 October
2009 Murano
DLK-48
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
AUTOMATIC BACK DOOR SYSTEM
AUTOMATIC BACK DOOR SYSTEM
System Diagram
INFOID:0000000003318284
System Description
INFOID:0000000003318285
The automatic back door system performs the automatic open/close operation of the back door by operating
the automatic back door switch, the automatic back door close switch, the back door opener switch, and Intel-
ligent Key.
AUTOMATIC BACK DOOR FUNCTIONS
JMKIA1859GB
Revision: 2008 October
2009 Murano
AUTOMATIC BACK DOOR SYSTEM
DLK-49
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OPERATION ENABLE CONDITION
*: If the registered Intelligent Key is used, the operation can be performed even if the back door is in the LOCK position
CONTROL IF NOT WITHIN THE OPERATION CONDITIONS DURING THE OPERATION
If the back door is not within the operation conditions during the operation, the automatic back door control unit
performs the control as follows.
Function
Description
Automatic back door open/close
function
In the case of the back door fully closed, operate the automatic back door switch, Intelligent Key
bottom or back door opener switch with the back door unlock. The back door closure motor re-
leases the latch, then the automatic back door motor opens the back door to the fully open po-
sition. Reverse the closure motor to the neutral position simultaneously.
In the case of the back door fully open, operate the automatic back door switch, Intelligent Key
bottom or back door close switch. The automatic back door motor closes the back door to the
half-latch position, then the back door closure motor closes to the full latch position. Then, re-
verse the closure motor to the neutral position.
NOTE:
When the main switch is OFF, the power operation is not available by back door opener switch
and automatic back door close switch.
Back door auto closure function
When the back door is closed to the half-latch position, the motor drives to rotate the latch lever
and pulls it in from half latched to fully latched and automatically closes the door. Then, reverse
the closure motor to the neutral position.
Anti-pinch function
During auto operation, if an object is detected by encoder pulse or touch sensor in the door's
path, a warning chime sounds and the back door operates in the reverse direction to prevent
pinching.
Intermittent clutch function
If the main switch is turned to OFF during auto operation, the back door may be closed suddenly
because the operation is interrupted immediately when the operation cannot be continued be-
cause of the detection of a system malfunction. Therefore, operate the clutch intermittently to
stabilize the back door behavior and ensure safety.
Warning function
The warning function as follows and are given to the user as warning information and warnings
using automatic back door buzzer and hazard.
Automatic back door switch
Intelligent Key
Automat-
ic back
door close
switch
Back door opener
switch
Operating direction
Fully closed
→
Open
Fully open
→
Closed
Fully
closed
→
Open
Fully open
→
Closed
Fully open
→
Closed
Fully closed
→
Open
Main switch
—
—
—
—
ON
ON
Ignition position
ON
ACC/
LOCK
—
Key is removed from
key slot.
—
ON
ACC/
LOCK
Shift selector lever
P position
—
—
—
—
—
P position
—
Vehicle speed
0 km/h
Back door lock condition
—
—
—
—
—
Unlock*
Touch sensor
Normal
Power supply
(Automatic power back
door control unit)
Approx. 11 V or more
Item
(Condition)
Back door condition
Main Switch (ON
→
OFF)
• Motor: OFF
• Clutch: OFF (Intermittent clutch function)
Key slot (OFF
→
ON)
The operation is continued
Revision: 2008 October
2009 Murano
DLK-50
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
AUTOMATIC BACK DOOR SYSTEM
TIME CHART FOR AUTOMATIC POWER BACK DOOR SYSTEM
Fully Closed to Fully Open Operation
When operating the automatic back door switch, automatic back door opener switch and Intelligent Key in the
fully closed position, the system operates as follows.
Vehicle stop condition (open operation)
• IGN ON and shift P position
→
IGN ON and
other than P position
• IGN OFF and shift N position
→
IGN ON and
N position
The operation is continued
Operation condition release during the opera-
tion start announcement condition
Automatic back door function does not operate
Vehicle speed
(0 km/h
→
More than 0 km/h)
Open operation
Operation stop and intermittent clutch function [Back
door fully closed or buzzer sounds until the vehicle
stops (pattern C)]
Close operation
The operation is continued [buzzer sounds (pattern C)
until back door fully closed]
Touch sensor
(Normal
→
Open)
Open operation
Close operation: the operation is continued (If the
pinch is detected after that, the system switches to the
intermittent clutch function)
Close operation
Intermittent clutch function
Closure (close) opera-
tion
Closure (open) operation and buzzer sounds (pattern
B)
Closure [open (return
the latch to the neutral
position)]
The operation is continued
Operation time
(More than approx. 30 sec.)
Intermittent clutch function
Back door opener switch
(OFF
→
ON)
Open/close operation
The operation is continued
Closure (close) opera-
tion
Closure (open) operation and back door open
Closure [open (return
the latch to the neutral
position)]
Back door open
Malfunction detected
(IGN circuit, half latch switch and back door
state)
Intermittent clutch function
Item
(Condition)
Back door condition
Revision: 2008 October
2009 Murano
AUTOMATIC BACK DOOR SYSTEM
DLK-51
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1.
Operates the buzzer and hazard after the operation enable conditions are established
2.
The back door closure motor performs the open operation after the buzzer (pattern A) stops sounding
3.
Stops the back door closure motor open operation after turning the open switch to ON
Then, operate the automatic back door motor and clutch to perform the back door open operation
4.
The back door closure motor performs the close operation after turning the half latch switch to ON
5.
Stop the back door closure motor close operation and return the latch to the neutral position after turning
the close switch to OFF
NOTE:
In the operation of steps 3 and 4, the inputs of half latch switch, open switch, and close switch may be different
according to the reaction force of the back door weather-strip. Refer to the area encircled by a broken line in
the Time chart (Fully closed to fully open operation)
Fully Open to Fully Closed Operation
When operating the automatic back door switch, automatic back door close switch and Intelligent Key, the
automatic back door system operates as follows.
T1: 50 msec.
T2: 200 msec.
T3: 250 msec.
T4: 750 msec.
T5: 100 msec.
T6: 350 msec.
JMKIA1860GB
Revision: 2008 October
2009 Murano
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст