Nissan Pathfinder (2010 year). Manual — part 640
TM-248
< DISASSEMBLY AND ASSEMBLY >
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
a. Remove needle bearing from high and low reverse clutch hub.
4. Remove rear sun gear assembly from mid sun gear assembly.
a. Remove snap ring from rear sun gear using suitable tool.
b. Remove 1st one-way clutch from rear sun gear.
5. Remove seal rings from mid sun gear.
SCIA2857E
SCIA2858E
SCIA2859E
SCIA4633E
SCIA2861E
2010 Pathfinder
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
TM-249
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
INSPECTION
High and Low Reverse Clutch Hub Snap Ring, Rear Sun Gear Snap Ring
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
1st One-way Clutch
• Check frictional surface for wear or damage.
CAUTION:
If necessary, replace the 1st one-way clutch.
Mid Sun Gear
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the mid sun gear.
Rear Sun Gear
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear sun gear.
High and Low Reverse Clutch Hub
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the high and low reverse clutch hub.
ASSEMBLY
1. Install seal rings to mid sun gear.
CAUTION:
• Do not reuse seal rings.
• Apply petroleum jelly to seal rings.
2. Install 1st one-way clutch to rear sun gear.
CAUTION:
Apply petroleum jelly to 1st one-way clutch.
SCIA2861E
SCIA4633E
2010 Pathfinder
TM-250
< DISASSEMBLY AND ASSEMBLY >
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
3. Install snap ring to rear sun gear using suitable tool.
4. Install rear sun gear assembly to mid sun gear assembly.
5. Install needle bearing to high and low reverse clutch hub.
CAUTION:
Apply petroleum jelly to needle bearing.
6. Install high and low reverse clutch hub to mid sun gear assem-
bly.
7. Install snap ring to mid sun gear assembly using suitable tool.
CAUTION:
Do not excessively expand snap ring.
SCIA2859E
SCIA2858E
SCIA2857E
SCIA2856E
SCIA2855E
2010 Pathfinder
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
TM-251
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
8. Check operation of 1st one-way clutch.
a. Hold mid sun gear and turn rear sun gear.
b. Check 1st one-way clutch for correct locking and unlocking
directions.
CAUTION:
If not as shown, check installation direction of 1st one-way
clutch.
9. Install needle bearing and bearing race to high and low reverse clutch hub.
CAUTION:
Apply petroleum jelly to needle bearing and bearing race.
• VQ40DE models
• VK56DE models
SCIA3132E
SCIA2854E
SCIA5238E
2010 Pathfinder
TM-252
< DISASSEMBLY AND ASSEMBLY >
HIGH AND LOW REVERSE CLUTCH
HIGH AND LOW REVERSE CLUTCH
Exploded View
INFOID:0000000005258209
Disassembly and Assembly
INFOID:0000000005258210
DISASSEMBLY
1. Remove bearing race from high and low reverse clutch drum.
2. Remove snap ring from high and low reverse clutch drum using
suitable tool.
3. Remove drive plates, driven plates and retaining plate from high
and low reverse clutch drum.
INSPECTION
•
Check the following, and replace high and low reverse clutch assembly if necessary.
High and Low Reverse Clutch Snap Ring
• Check for deformation, fatigue or damage.
High and Low Reverse Clutch Drive Plates
1.
High and low reverse clutch drum 2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
6.
Bearing race
SCIA5224E
SCIA5215E
SCIA2868E
2010 Pathfinder
HIGH AND LOW REVERSE CLUTCH
TM-253
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
• Check facing for burns, cracks or damage.
High and Low Reverse Clutch Retaining Plate and Driven Plates
• Check facing for burns, cracks or damage.
ASSEMBLY
1. Install drive plates, driven plates and retaining plate in high and low reverse clutch drum.
CAUTION:
Take care with order of plates.
2. Install snap ring in high and low reverse clutch drum using suit-
able tool.
3. Install bearing race to high and low reverse clutch drum.
CAUTION:
Apply petroleum jelly to bearing race.
SCIA2868E
SCIA5215E
2010 Pathfinder
TM-254
< DISASSEMBLY AND ASSEMBLY >
DIRECT CLUTCH
DIRECT CLUTCH
Exploded View
INFOID:0000000005258211
Disassembly and Assembly
INFOID:0000000005258212
DISASSEMBLY
1. Remove snap ring from direct clutch drum using suitable tool.
2. Remove retaining plates, drive plates, driven plates and dish
plate from direct clutch drum.
INSPECTION
•
Check the following, and replace direct clutch assembly if necessary.
Direct Clutch Snap Ring
• Check for deformation, fatigue or damage.
Direct Clutch Drive Plates
• Check facing for burns, cracks or damage.
Direct Clutch Retaining Plate and Driven Plates
• Check facing for burns, cracks or damage.
ASSEMBLY
1.
Direct clutch drum
2.
Dish plate
3.
Retaining plate
4.
Driven plate
5.
Retaining plate
6.
Snap ring
7.
Drive plate
SCIA7015E
SCIA2868E
2010 Pathfinder
DIRECT CLUTCH
TM-255
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
1. Install dish plate, retaining plates, drive plates and driven plates
in direct clutch drum.
CAUTION:
Take care with order of plates.
• VQ40DE models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Dish plate (5)
- Driveplate/Driven plate: 5/4
CAUTION:
Take care with order of plates.
• VK56DE models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Dish plate (5)
- Driveplate/Driven plate: 6/6
2. Install snap ring in direct clutch drum using suitable tool.
SCIA6952E
SCIA6951E
SCIA2868E
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст