Nissan Silvia. Manual — part 300
WARNING:
Support manual transmission while removing it.
Installation
NMMT0006S02
I
Install in the reverse order of removal.
SMT058E
I
Tighten bolt securing transmission.
CAUTION:
When installing the transmission, perform carefully so that the
main drive shaft of the transmission does not contact the
clutch cover.
Bolt No.
PCS
Tightening torque
N·m (kg-m, ft-lb)
mm (in)
1
2
70 - 79 (7.1 - 8.1, 52 - 58)
86 (3.39)
2
2
63 (2.48)
3
2
113 (4.45)
4
1
98 (3.86)
5
3
30 - 39 (3.0 - 4.0, 22 - 28)
95 (3.74)
6
1
95 (3.74)
GI
MA
EM
LC
EC
FE
CL
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REMOVAL AND INSTALLATION
Removal (Cont’d)
MT-13
Air Breather Hose
NMMT0006S03
JMT059E
Refer to the figure above when removing or installing the air
breather hose.
CAUTION:
Make sure there are no pinched or blocked areas in the air
breather hose caused by bending or winding when installing
it.
REMOVAL AND INSTALLATION
Air Breather Hose
MT-14
NMMT0007
Transmission Components
NMMT0007S01
FMT005
GI
MA
EM
LC
EC
FE
CL
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
OVERHAUL
Transmission Components
MT-15
Rear Extension
COMPONENTS
NMMT0025
FMT006
FMT007
REMOVAL
NMMT0026
1.
Remove the filler plug and drain plug from the transmission
case to drain transmission oil.
2.
Remove the PNP switch.
3.
Remove the mounting bolts to remove the control housing from
the extension case.
FMT008
4.
Remove the mounting bolts to remove the striking lever from
the striking rod.
5.
Remove the mounting bolts to remove the extension assem-
bly from the transmission case assembly.
INSTALLATION
NMMT0027
I
Install in the reverse order of removal.
I
Apply Three Bond, TB1281 or the equivalent onto the entire
circumferential mating surface of the rear extension with the
transmission case. Then, install the rear extension to the trans-
mission case assembly.
REPAIR FOR COMPONENT PARTS
Rear Extension
MT-16
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст