Murano Cross Cabriolet Z51 (2013 year). Manual — part 82
SR-10
< BASIC INSPECTION >
COLLISION DIAGNOSIS
Trim/headlining
1.
Check for visible signs of damage (dents, cracks, deformation, etc.) of the interior trim on the
collision side.
2.
If damaged
−
REPLACE the damaged trim parts.
Door-mounted curtain air bag
module LH
If the door-mounted curtain air bag LH has NOT deployed:
1.
Check for visible signs of damage (dents, tears, deformation, etc.) of the door finisher on the
collision side.
2.
If damaged
−
REPLACE the door finisher LH with new fasteners.
3.
Check for visible signs of damaged (tears etc.) of the door-mounted curtain air bag module LH.
4.
Check harness and connectors for damage, and terminals for deformities.
5.
If no damage is found, reinstall door finisher.
CAUTION:
When removing door-mounted curtain air bag module from door finisher, never reuse
door finisher.
6.
If damaged
−
REPLACE the door finisher LH and door-mounted curtain air bag module LH with
new fasteners.
Door-mounted curtain air bag
module RH
If the door-mounted curtain air bag RH has NOT deployed:
1.
Check for visible signs of damage (dents, tears, deformation, etc.) of the door finisher on the
collision side.
2.
If damaged
−
REPLACE the door finisher RH with new fasteners.
3.
Check for visible signs of damage (tears etc.) of the door-mounted curtain air bag module RH.
4.
Check harness and connectors for damage, and terminals for deformities.
5.
If no damage is found, reinstall door finisher.
CAUTION:
When removing door-mounted curtain air bag module from door finisher, never reuse
door finisher.
6.
If damaged
−
REPLACE the door finisher RH and door-mounted curtain air bag module RH with
new fasteners.
Pop-up roll bar
If the pop-up roll bar has NOT deployed:
1.
Check for visible signs of damage (dents, tears, deformation, etc.) of the pop-up roll bar.
2.
If damaged
−
REPLACE the pop-up roll bar with new fasteners.
3.
Check harness and connectors for damage, and terminals for deformities.
4.
If no damage is found, reinstall the pop-up roll bar with new fasteners.
5.
Check for visible signs of damage (dents, cracks, deformation, etc.) of the seatback support
brace assembly.
6.
If damaged
−
REPAIR the seatback support brace assembly.
Part
Inspection
Revision: 2012 October
2013 Murano CrossCabriolet
DRIVER AIR BAG MODULE
SR-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
REMOVAL AND INSTALLATION
DRIVER AIR BAG MODULE
Exploded View
INFOID:0000000008462937
Removal and Installation
INFOID:0000000008462938
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 min-
utes or more.
• Always work from the side of air bag module. Never work in front of it.
• Never use air tools or electric tools for servicing.
REMOVAL
1.
Remove side lids (LH and RH).
2.
Remove TORX bolts (LH and RH) from steering wheel (1) lower
side using TORX bit (A).
3.
Pull out driver air bag module.
1.
Steering wheel
2.
Driver air bag module
3.
Side lid (LH/RH)
4.
TORX bolt (LH/RH)
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
JMHIA0503GB
JMHIA0265ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
SR-12
< REMOVAL AND INSTALLATION >
DRIVER AIR BAG MODULE
4.
Disconnect driver air bag harness connector.
CAUTION:
• For installing/removing the driver air bag harness connec-
tor, insert thin screwdriver wrapped in tape into notch, lift
lock and remove the connector.
• Install the connector with lock raised, and push lock into
the connector.
• After installing the connector, check that the lock is
pushed securely into it.
5.
Remove driver air bag module.
CAUTION:
• Always place the driver air bag module with pad side facing
upward.
• Never impact the driver air bag module.
• Replace the driver air bag module if it is dropped or sustains
an impact.
• Never insert any foreign objects (screwdriver, etc.) into the driver air bag module.
• Never disassemble the driver air bag module.
• Never expose the driver air bag module to temperatures exceeding 90
°
C (194
°
F).
• Never allow oil, grease, detergent, or water to come in contact with the driver air bag module.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Never reuse TORX bolts after removal, replace with new bolts.
• Fix the driver air bag harness to the harness fixing hook (A).
PHIA0953J
: Upward
JMHIA0504ZZ
JMHIA0009ZZ
JMHIA0505ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
DRIVER AIR BAG MODULE
SR-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
• Tighten the TORX bolts after completely adjusting the centers of fixing holes on the driver air bag
module side and the steering wheel side. If the holes are misaligned, the bolt threads are damaged
and the module is not installed securely.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
Revision: 2012 October
2013 Murano CrossCabriolet
SR-14
< REMOVAL AND INSTALLATION >
SPIRAL CABLE
SPIRAL CABLE
Exploded View
INFOID:0000000008462939
Removal and Installation
INFOID:0000000008462940
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 min-
utes or more.
• Never use air tools or electric tools for servicing.
REMOVAL
1.
Remove driver air bag module. Refer to
SR-11, "Removal and Installation"
.
2.
Remove steering wheel. Refer to
ST-30, "Removal and Installation"
.
3.
Remove steering column cover (upper/lower). Refer to
.
4.
Disconnect spiral cable and steering angle sensor harness con-
nectors (A).
NOTE:
Disconnect spiral cable and steering angle sensor body side
harness connectors after removing the spiral cable.
5.
Remove spiral cable fixing screws.
1.
Steering column cover (upper)
2.
Spiral cable
3.
Steering column cover (lower)
4.
Steering column assembly
A
: Driver air bag harness connector
JMHIA0506ZZ
JMHIA0507ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
SPIRAL CABLE
SR-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
6.
Remove spiral cable side pawls (A).
7.
Pull out forward spiral cable.
8.
Remove steering angle sensor. Refer to
BRC-105, "Removal and Installation"
.
CAUTION:
• Never impact the spiral cable.
• Never impact the spiral cable by dropping, etc. Replace the
spiral cable if it is dropped or sustains an impact.
• Never disassemble the spiral cable.
• Never apply lubricant to the spiral cable.
• Never allow oil, grease, detergent, or water to come in contact with the spiral cable.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• The spiral cable may snap during steering operation if the
cable is installed in an improper position.
The neutral position is set as per the following.
• Turn carefully the spiral cable clockwise to the end position.
Then turn it counterclockwise (about 2 and a half turns) and
stop turning at the mark (B) on which the stopper insertion
holes are in the same position.
• The service part is installed in the neutral position by the
stopper and can be set without adjusting after the stopper is
removed.
• Never over turn the spiral cable or go beyond number of turns
required. (This will cause the cable to snap.)
• Adjust the spiral cable locating pin (A) to the steering wheel
locating pin hole (C).
JMHIA0508ZZ
JMHIA0009ZZ
JMHIA0657ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
SR-16
< REMOVAL AND INSTALLATION >
SPIRAL CABLE
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
Revision: 2012 October
2013 Murano CrossCabriolet
FRONT PASSENGER AIR BAG MODULE
SR-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
FRONT PASSENGER AIR BAG MODULE
Exploded View
INFOID:0000000008462941
Removal and Installation
INFOID:0000000008462942
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 min-
utes or more.
• Always work from the side of air bag module. Never work in front of it.
• Never use air tools or electric tools for servicing.
REMOVAL
1.
Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2.
Disconnect front passenger air bag harness connector (A).
3.
Remove front passenger air bag module mounting bolt (B).
NOTE:
The figure shows the installed front passenger air bag module.
(Under view of the module installed without glove box cover.)
1.
Instrument panel assembly
2.
Front passenger air bag module
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA0509GB
JMHIA0510ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
SR-18
< REMOVAL AND INSTALLATION >
FRONT PASSENGER AIR BAG MODULE
4.
Remove front passenger air bag module fixing screws (B) from
instrument panel assembly (1).
5.
Disconnect pawls (C) by using remover tool (A), and then
remove front passenger air bag module (2) from instrument
panel assembly.
CAUTION:
• Always place the front passenger air bag module with pad
side facing upward.
• Never impact the passenger air bag module.
• Replace the front passenger air bag module if it is dropped or
sustains an impact.
• Never insert any foreign objects (screwdriver, etc.) into front passenger air bag module.
• Never disassembly the front passenger air bag module.
• Never expose the front passenger air bag module to temperatures exceeding 90
°
C (194
°
F).
• Never allow oil, grease, detergent, or water to come in contact with the front passenger air bag mod-
ule.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Never reuse fixing bolts after removal, replace with new bolts.
• Never damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA0511ZZ
: Upward
JMHIA0512ZZ
JMHIA0009ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
DOOR-MOUNTED CURTAIN AIR BAG MODULE
SR-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
DOOR-MOUNTED CURTAIN AIR BAG MODULE
Exploded View
INFOID:0000000008462943
Removal and Installation
INFOID:0000000008462944
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 min-
utes or more.
• Before starting removal and installation operation, always eliminate static electricity from door fin-
isher, door-mounted curtain air bag module, and body of the technician (to prevent an accidental
activation due to static electricity).
• Never use air tools or electric tools for servicing.
• When replacing door-mounted curtain air bag module, always replace it together with door finisher
as a set.
REMOVAL
1.
Remove door finisher. Refer to
INT-13, "Removal and Installation"
CAUTION:
Disconnect first the door-mounted curtain air bag harness connector before disconnecting the
other harness connectors.
JMHIA2064GB
1.
Door finisher
2.
Door-mounted curtain air bag module
: Vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
Revision: 2012 October
2013 Murano CrossCabriolet
SR-20
< REMOVAL AND INSTALLATION >
DOOR-MOUNTED CURTAIN AIR BAG MODULE
2.
Remove door-mounted curtain air bag module fixing screws (A)
and mounting bolts (B).
3.
Remove door-mounted curtain air bag module.
CAUTION:
• Never place any object in deploying path of door-mounted
curtain air bag module. Never lean door-mounted curtain air
bag module against wall or others.
• Always place air bag module so that inflator label is visible.
• Never impact the door-mounted curtain air bag module.
• Replace door-mounted curtain air bag module if it is dropped
or sustains an impact.
• Never insert any foreign objects (screwdriver, etc.) into the door-mounted curtain air bag module.
• Never disassemble the door-mounted curtain air bag module.
• Never expose the door-mounted curtain air bag module to temperatures exceeding 90
°
C (194
°
F).
• Never allow oil, grease, detergent, or water to come in contact with the door-mounted curtain air bag
module.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• When removing door-mounted curtain air bag module from door finisher, never reuse door finisher.
• Never forget to tighten the mounting bolts and fixing screws of door-mounted curtain air bag mod-
ule.
• Never damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
or
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA2065ZZ
: Upward
JMHIA2066ZZ
JMHIA0009ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
POP-UP ROLL BAR
SR-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
POP-UP ROLL BAR
Exploded View
INFOID:0000000008462945
Removal and Installation
INFOID:0000000008462946
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 min-
utes or more.
• Never use air tools or electric tools for servicing.
• When repairing, removing and installing pop-up roll bar, always refer to SRS AIR BAG and SRS AIR
BAG CONTROL SYSTEM.
CAUTION:
1.
Pup-up roll bar assembly
: Vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA2068GB
Revision: 2012 October
2013 Murano CrossCabriolet
SR-22
< REMOVAL AND INSTALLATION >
POP-UP ROLL BAR
Glass breaking pin is sharp. For safety purposes, protect glass breaking pin (A) of pop-up roll bar
using polystyrene foam or rubber sheet so that glass breaking pin does not contact operator during
removal and installation.
REMOVAL
1.
Open trunk lid.
2.
Remove trunk front finisher. Refer to
INT-36, "TRUNK FRONT FINISHER : Removal and Installation"
.
3.
Remove pop-up roll bar assembly mounting bolts (A) for trunk
room side.
4.
Close trunk lid.
5.
Fully open soft top.
6.
Remove rear seatback. Refer to
SE-49, "SEATBACK : Removal and Installation"
7.
Remove rear parcel shelf front finisher. Refer to
INT-30, "REAR PARCEL SHELF FRONT FINISHER :
.
8.
Remove pop-up roll bar assembly mounting bolts (A) for rear
seatback side.
9.
Disconnect pop-up roll bar assembly harness connector (A).
10. Pull up and remove pop-up roll bar assembly.
JMHIA2093ZZ
: Vehicle front
JMHIA2071ZZ
: Vehicle front
JMHIA2070ZZ
: Vehicle front
JMHIA2069ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
POP-UP ROLL BAR
SR-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
CAUTION:
• Always place the pop-up roll bar assembly with special bolts
side facing upward.
• Never place any object in deploying path of pop-up roll bar
assembly. Never lean pop-up roll bar assembly against a wall
or others.
• Never impact the pop-up roll bar assembly.
• Replace pop-up roll bar assembly if it is dropped or sustained
an impact.
• Never insert any foreign objects (screwdriver, etc.) into the pop-up roll bar assembly.
• Never disassemble the pop-up roll bar assembly.
• Never expose the pop-up roll bar assembly to temperatures of more than 90
°
C (194
°
F).
• Never allow oil, grease, detergent, or water to come in contact with the pop-up roll bar assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never reuse old mounting bolts after removal, replace with new bolts.
• Never damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
Removal When Pop-up Roll Bar is Activated While Soft Top is Closed
When rear glass is broken and pop-up roll bar is deployed
WARNING:
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 minutes
or more.
CAUTION:
Remove broken pieces of rear glass in advance for preventing injury.
1.
Open trunk lid.
2.
Remove trunk front finisher. Refer to
INT-36, "TRUNK FRONT FINISHER : Removal and Installation"
.
: Upward
JMHIA2072ZZ
JMHIA0009ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
SR-24
< REMOVAL AND INSTALLATION >
POP-UP ROLL BAR
3.
Remove pop-up roll bar assembly mounting bolts (A) of trunk
room side.
4.
Close trunk lid.
5.
Remove rear seatback. Refer to
SE-49, "SEATBACK : Removal and Installation"
6.
Remove rear parcel shelf front finisher. Refer to
INT-30, "REAR PARCEL SHELF FRONT FINISHER :
.
7.
Remove pop-up roll bar assembly mounting bolts (A) of rear
seatback side.
8.
Disconnect pop-up roll bar assembly harness connector (A).
9.
Pull out pop-up roll bar from rear glass portion to upward.
When pop-up roll bar is deployed and rear glass is not broken
WARNING:
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 minutes
or more.
1.
Open trunk lid.
2.
Remove trunk front finisher. Refer to
INT-36, "TRUNK FRONT FINISHER : Removal and Installation"
.
: Vehicle front
JMHIA2071ZZ
: Vehicle front
JMHIA2070ZZ
: Vehicle front
JMHIA2069ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
POP-UP ROLL BAR
SR-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
3.
Remove pop-up roll bar assembly mounting bolts (A) of trunk
room side.
4.
Close trunk lid.
5.
Slide down pop-up roll bar.
CAUTION:
Fix pop-up roll bar using fixing band so that pop-up roll bar may not move upward.
6.
Fully open soft top.
7.
Remove rear seatback. Refer to
SE-49, "SEATBACK : Removal and Installation"
8.
Remove rear parcel shelf front finisher. Refer to
INT-30, "REAR PARCEL SHELF FRONT FINISHER :
.
9.
Remove pop-up roll bar assembly mounting bolts (A) of rear
seatback side.
10. Disconnect pop-up roll bar assembly harness connector (A).
11. Pull up and remove pop-up roll bar assembly.
: Vehicle front
JMHIA2071ZZ
: Vehicle front
JMHIA2070ZZ
: Vehicle front
JMHIA2069ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст