Nissan Juke (2012 year). Service Repair Manual — part 169
MWI-54
< REMOVAL AND INSTALLATION >
COMBINATION METER
4.
Turn the lower part of the combination meter in the direction of
the arrow to remove the combination meter from the instrument
panel assembly.
CAUTION:
Never damage the front cover.
5.
Remove connector to remove the combination meter.
CAUTION:
Never damage the front cover.
INSTALLATION
Install in the reverse order of removal.
Disassembly and Assembly
INFOID:0000000007577823
DISASSEMBLY
1.
Disengage the pawls (2 on the sides, 3 on the lower part) of the combination meter.
2.
Insert the removal tool into the clearance (in the order of A, B)
between the front cover and the meter control unit. Remove 4
pawls on the upper side of the front cover by turning the tool
while increasing the clearance.
CAUTION:
Wrap the removal tools with protective tape to prevent
scratches.
3.
Pull the front cover straight to remove it from the meter control unit assembly.
CAUTION:
Never damage the front cover.
Never touch the pointer and the crystalline liquid.
ASSEMBLY
Install the front cover straight to the meter control unit assembly and engage all the pawl.
CAUTION:
Never damage the front cover.
JSNIA3546ZZ
JSNIA3210ZZ
Revision: 2011 October
2012 JUKE
PB-1
BRAKES
C
D
E
G
H
I
J
K
L
M
SECTION
PB
A
B
PB
N
O
P
CONTENTS
PARKING BRAKE SYSTEM
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Commercial Service Tool . . . . . . . . . . ..
PERIODIC MAINTENANCE . . . . . . ..
PARKING BRAKE SYSTEM . . . . . . . ...
Inspection and Adjustment . . . . . . . . . ....
PARKING BRAKE SHOE . . . . . . . . ...
Adjustment . . . . . . . . . . . . . . . ....
REMOVAL AND INSTALLATION . . . .
PARKING BRAKE CONTROL . . . . . . .
Exploded View . . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . . ..
Adjustment . . . . . . . . . . . . . . . ....
PARKING BRAKE SHOE . . . . . . . . ..
Exploded View . . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . . ..
Inspection and Adjustment . . . . . . . . . ..
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . .
Parking Drum Brake . . . . . . . . . . . .
Parking Brake Control . . . . . . . . . . . .
Revision: 2011 October
2012 JUKE
PB-2
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tool
INFOID:0000000007578401
Tool name
Description
Power tool
Loosening bolts and nuts
PBIC0190E
Revision: 2011 October
2012 JUKE
PARKING BRAKE SYSTEM
PB-3
< PERIODIC MAINTENANCE >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
PERIODIC MAINTENANCE
PARKING BRAKE SYSTEM
Inspection and Adjustment
INFOID:0000000007578402
INSPECTION
Lever Stroke
1.
Operate the parking brake lever with a force of 196 N (20 kg, 44 lb). Check that the lever stroke is within
the specified number of notches. (Check it by listening to the clicks of the ratchet.)
2.
When brake warning lamp turns ON, check that the lever stroke is within the specified number of notches.
(Check it by listening to the clicks of the ratchet.)
Inspect Components
• Check each component for installation condition such as looseness.
• Check the parking brake lever assembly for bend, damage and cracks. Replace if necessary.
• Check the cables and equalizer for wear, damage and cracks. Replace if necessary.
• Check the parking brake switch, and replace it if necessary. Refer to
BRC-97, "Component Inspection"
ADJUSTMENT
1.
Remove rear tires with power tool.
2.
Fix the disc rotor using wheel nut.
3.
Remove the console mask. Refer to
IP-22, "Removal and Installation"
4.
Remove the adjusting hole plug from the disc rotor. Turn the
adjuster (1) in the direction (A) as shown in the figure using a
suitable tool until the disc rotor is locked.
5.
Turn back the adjuster 7 notches from the locked position.
6.
Rotate the disc rotor to check that there is no drag. Install the
adjuster hole plug. Refer to
PB-10, "Inspection and Adjustment"
7.
Adjust the cable with the following procedure.
a.
Operate and maintain the parking brake lever with a force of 400 N (41 kg, 90 lb) for 15 minutes or more.
b.
Adjust the parking brake lever stroke by turning the adjusting nut
(1) with a socket wrench.
CAUTION:
Make sure to securely depress the brake pedal.
c.
Operate the parking brake lever with a force of 196 N (20 kg,
44lb). Check that the lever stroke is within the specified number
of notches. (Check it by listening to the clicks of the ratchet.)
d.
Rotate the disc rotor to check that there is no drag. Refer to
10, "Inspection and Adjustment"
.
Number of notches
: Refer to
PB-12, "Parking Brake Control"
Number of notches
: Refer to
PB-12, "Parking Brake Control"
JPFIB0088ZZ
Number of notches
: Refer to
JPFIB0131ZZ
Revision: 2011 October
2012 JUKE
PB-4
< PERIODIC MAINTENANCE >
PARKING BRAKE SHOE
PARKING BRAKE SHOE
Adjustment
INFOID:0000000007578403
1.
Adjust parking brake lever stroke. Refer to
PB-3, "Inspection and Adjustment"
.
2.
Perform parking brake break-in (drag on) operation by driving vehicle under the following conditions:
• Drive forward
• Vehicle speed: Approx. 43 km/h (27 MPH) set (constant and forward)
• Parking brake operating force: 125 N (12.8 kg, 28.1 lb) set contact
• Time: Approx. 8 sec.
CAUTION:
To prevent lining from getting too hot, allow a cool off period of approximately 5 minutes after
every break-in operation.
3.
After the break-in procedure, check parking brake lever stroke of parking brake.
CAUTION:
If it is out of the specification, adjust again. Refer to
PB-3, "Inspection and Adjustment"
Revision: 2011 October
2012 JUKE
PARKING BRAKE CONTROL
PB-5
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
REMOVAL AND INSTALLATION
PARKING BRAKE CONTROL
Exploded View
INFOID:0000000007578404
2WD
AWD
1.
Parking brake lever assembly
2.
Adjusting nut
3.
Parking brake switch
4.
Front cable
5.
Rear cable (LH)
6.
Rear cable (RH)
: Apply multi-purpose grease.
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
JSFIA0603GB
Revision: 2011 October
2012 JUKE
PB-6
< REMOVAL AND INSTALLATION >
PARKING BRAKE CONTROL
Removal and Installation
INFOID:0000000007578405
REMOVAL
1.
Remove rear tires with power tool.
2.
Remove the center console assembly. Refer to
IP-22, "Removal and Installation"
3.
Disconnect the parking brake switch harness connector.
4.
Remove adjusting nut (1) and loosen front cable.
5.
Remove the parking brake lever assembly.
1.
Parking brake lever assembly
2.
Adjusting nut
3.
Parking brake switch
4.
Front cable
5.
Rear cable (LH)
6.
Rear cable (RH)
: Apply multi-purpose grease.
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
JSFIA0466GB
JPFIB0131ZZ
Revision: 2011 October
2012 JUKE
PARKING BRAKE CONTROL
PB-7
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
6.
Remove rear cable with the following procedure.
a.
Pull equalizer (A) of the front cable (1) in a rearward direction.
b.
Push the equalizer upward to remove the rear cable (2).
7.
Remove center muffler and heat plate. Refer to
8.
Remove brake shoe, and remove rear cable from toggle lever.
Refer to
9.
Remove rear cable mounting bolts, pull out rear cable from vehi-
cle.
10. Press the pawl (1) to remove the rear cable from the vehicle.
INSTALLATION
Note the following, install in the reverse order of the removal.
• Never reuse adjusting nut.
• Perform adjustment after installation. Refer to
PB-3, "Inspection and Adjustment"
Adjustment
INFOID:0000000007578406
ADJUSTMENT AFTER INSTALLATION
Adjust the parking brake lever stroke. Refer to
PB-3, "Inspection and Adjustment"
JPFIB0129ZZ
JPFIB0130ZZ
Revision: 2011 October
2012 JUKE
PB-8
< REMOVAL AND INSTALLATION >
PARKING BRAKE SHOE
PARKING BRAKE SHOE
Exploded View
INFOID:0000000007578407
Removal and Installation
INFOID:0000000007578408
REMOVAL
WARNING:
Since dust covering the parking brake has an affect on human body, the dust must be removed with a
dust collector. Never splatter the dust with an air blow gun.
1.
Remove rear tires with power tool.
2.
Remove disc rotor.
• 2WD: Refer to
RAX-5, "Removal and Installation"
.
• AWD: Refer to
RAX-14, "Removal and Installation"
.
CAUTION:
Parking brake completely in the released position.
1.
Anti-rattle pin
2.
Back plate
3.
Toggle lever
4.
Parking brake shoe
5.
Brake strut
6.
Return spring
7.
Spring
8.
Adjuster
: Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease.
JPFIB0086ZZ
Revision: 2011 October
2012 JUKE
PARKING BRAKE SHOE
PB-9
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
3.
Remove return spring (1) of the upper side.
4.
Remove return spring (1) of the lower side.
5.
Remove spring (1).
CAUTION:
Never drop the removed parts.
6.
Remove parking brake shoes, adjuster, brake strut and toggle
lever.
CAUTION:
• The parking brake shoes for the front wheels are made of
different materials from those for the rear wheels. Never
misidentify them when removing.
• Never drop the removed parts.
7.
Press the rear cable spring (1) against spring tension to remove
rear cable (3) from the clamp (A) of toggle lever (2).
CAUTION:
Never bend rear cable.
8.
For the removal of back plate.
• 2WD: Refer to
RAX-5, "Removal and Installation"
.
• AWD: Refer to
RAX-14, "Removal and Installation"
.
INSTALLATION
Note the following, install in the reverse order of removal.
• Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease to the back plate and brake shoe.
CAUTION:
The parking brake shoes for the front wheels are made of different materials from those for the rear
wheels. Never misidentify them when removing and replacing.
JSFIA0485ZZ
JSFIA0486ZZ
JSFIA0487ZZ
JSFIA0488ZZ
Revision: 2011 October
2012 JUKE
PB-10
< REMOVAL AND INSTALLATION >
PARKING BRAKE SHOE
• Assemble adjusters so that threaded part is expanded when rotat-
ing it in the direction shown by arrow.
• Shorten adjuster by rotating it.
• When disassembling apply PBC (Poly Butyl Cuprysil) grease or sil-
icone-based grease to threads.
• Check that the component parts of the parking brake shoe are
properly installed.
• Check brake shoe sliding surface and drum inner surface for
grease. Wipe it off if it adhere on the surfaces.
Inspection and Adjustment
INFOID:0000000007578409
INSPECTION AFTER REMOVAL
Lining Thickness Inspection
• Check thickness (A) of lining.
Drum Inner Diameter Inspection
• Check inner diameter (B) of drum.
Other Inspections
Check the following items, and replace the parts if necessary.
• Lining for excessive wear, damage, and peeling.
• Brake shoe sliding surface for excessive wear and damage.
• Anti-rattle pin for excessive wear, damage and rust.
• Return spring and spring for settling, excessive wear, damage, and rust.
A : For right side brake
B : For left side brake
: Vehicle front
: Adjuster expands
JPFIB0087ZZ
JSFIA0489ZZ
A
: Refer to
.
SBR021A
B
: Refer to
.
JPFIB0008ZZ
Revision: 2011 October
2012 JUKE
PARKING BRAKE SHOE
PB-11
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
• Adjuster for smoothness.
• Toggle lever and brake strut for excessive wear, damage and rust.
• Visually check inside of the drum for excessive wear, cracks, and damage with a pair of vernier calipers.
ADJUSTMENT AFTER INSTALLATION
1.
Adjust the parking brake lever stroke. Refer to
PB-3, "Inspection and Adjustment"
.
2.
Rotate the disc rotor to check that there is no drag. Install the plug. If any drag is found, follow the proce-
dure described below.
a.
Adjust parking brake stroke again.
b.
Check rear disc brake. Refer to
BR-56, "BRAKE CALIPER ASSEMBLY : Inspection"
.
3.
Adjust the parking brake shoe. Refer to
Revision: 2011 October
2012 JUKE
PB-12
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Parking Drum Brake
INFOID:0000000007578410
Unit: mm (in)
Parking Brake Control
INFOID:0000000007578411
Item
Limit
Brake lining
1.5 (0.059)
Drum (disc of inner diameter)
173 (6.81)
Item
Standard
Number of notches [under force of 196 N (20 kg, 44 lb)]
9
−
10 notches
Number of notches when brake warning lamp turns ON
1 notch
Revision: 2011 October
2012 JUKE
PCS
PCS-1
ELECTRICAL & POWER CONTROL
C
D
E
F
G
H
I
J
K
L
B
SECTION
PCS
A
O
P
N
CONTENTS
POWER CONTROL SYSTEM
IPDM E/R (WITH I-KEY)
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
SYSTEM DESCRIPTION . . . . . . . ..
COMPONENT PARTS . . . . . . . . . .
Component Parts Location . . . . . . . . . ....
SYSTEM . . . . . . . . . . . . . . . ..
RELAY CONTROL SYSTEM . . . . . . . . . ..
RELAY CONTROL SYSTEM : System Diagram ...
RELAY CONTROL SYSTEM : System Descrip-
tion . . . . . . . . . . . . . . . . . . ....
RELAY CONTROL SYSTEM : Fail-Safe . . . . ...
POWER CONTROL SYSTEM . . . . . . . . .....
POWER CONTROL SYSTEM : System Diagram
. ..
POWER CONTROL SYSTEM : System Descrip-
tion . . . . . . . . . . . . . . . . . . ....
SIGNAL BUFFER SYSTEM . . . . . . . . . ....
SIGNAL BUFFER SYSTEM : System Diagram . ....
SIGNAL BUFFER SYSTEM : System Description
. ..
POWER CONSUMPTION CONTROL SYSTEM . .....
POWER CONSUMPTION CONTROL SYSTEM :
System Diagram . . . . . . . . . . . . . ..
POWER CONSUMPTION CONTROL SYSTEM :
System Description . . . . . . . . . . . . .
DIAGNOSIS SYSTEM (IPDM E/R) . . . . . .
Diagnosis Description . . . . . . . . . . . .
CONSULT Function (IPDM E/R) . . . . . . . .
ECU DIAGNOSIS INFORMATION . . . ..
IPDM E/R . . . . . . . . . . . . . . ...
Reference Value . . . . . . . . . . . . . ..
Fail-Safe . . . . . . . . . . . . . . . . ..
DTC Index . . . . . . . . . . . . . . . ...
WIRING DIAGRAM . . . . . . . . . ..
IPDM E/R . . . . . . . . . . . . . . ...
Wiring Diagram . . . . . . . . . . . . . .
DTC/CIRCUIT DIAGNOSIS . . . . . . .
U1000 CAN COMM CIRCUIT . . . . . . ...
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B2098 IGNITION RELAY ON STUCK . . . ..
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B2099 IGNITION RELAY OFF STUCK . . .
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
POWER SUPPLY AND GROUND CIRCUIT .
Diagnosis Procedure . . . . . . . . . . . ...
REMOVAL AND INSTALLATION . . . ...
IPDM E/R . . . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
IPDM E/R (WITHOUT I-KEY)
PRECAUTION . . . . . . . . . . . ..
PRECAUTIONS . . . . . . . . . . . . .
Revision: 2011 October
2012 JUKE
PCS-2
SYSTEM DESCRIPTION . . . . . . .
COMPONENT PARTS . . . . . . . . . ...
Component Parts Location . . . . . . . . . .
SYSTEM . . . . . . . . . . . . . . . .
RELAY CONTROL SYSTEM . . . . . . . . ....
RELAY CONTROL SYSTEM : System Diagram ....
RELAY CONTROL SYSTEM : System Descrip-
tion . . . . . . . . . . . . . . . . . . ..
RELAY CONTROL SYSTEM : Fail-Safe . . . ....
POWER CONTROL SYSTEM . . . . . . . . ...
POWER CONTROL SYSTEM : System Diagram ...
POWER CONTROL SYSTEM : System Descrip-
tion . . . . . . . . . . . . . . . . . . ..
SIGNAL BUFFER SYSTEM . . . . . . . . . ..
SIGNAL BUFFER SYSTEM : System Diagram . ..
SIGNAL BUFFER SYSTEM : System Description ...
POWER CONSUMPTION CONTROL SYSTEM . ...
POWER CONSUMPTION CONTROL SYSTEM :
System Diagram . . . . . . . . . . . . . .
POWER CONSUMPTION CONTROL SYSTEM :
System Description . . . . . . . . . . . . .
DIAGNOSIS SYSTEM (IPDM E/R) . . . . .
Diagnosis Description . . . . . . . . . . . .
CONSULT Function (IPDM E/R) . . . . . . ....
ECU DIAGNOSIS INFORMATION . . . ..
IPDM E/R . . . . . . . . . . . . . . ...
Reference Value . . . . . . . . . . . . . .
Fail-Safe . . . . . . . . . . . . . . . . .
DTC Index . . . . . . . . . . . . . . . ..
WIRING DIAGRAM . . . . . . . . . .
IPDM E/R . . . . . . . . . . . . . . ...
Wiring Diagram . . . . . . . . . . . . . ...
DTC/CIRCUIT DIAGNOSIS . . . . . . .
U1000 CAN COMM CIRCUIT . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B2098 IGNITION RELAY ON STUCK . . . ...
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B2099 IGNITION RELAY OFF STUCK . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
POWER SUPPLY AND GROUND CIRCUIT . .
Diagnosis Procedure . . . . . . . . . . . ..
REMOVAL AND INSTALLATION . . . ..
IPDM E/R . . . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
POWER DISTRIBUTION SYSTEM
PRECAUTION . . . . . . . . . . .
PRECAUTIONS . . . . . . . . . . . . .
Precaution for Procedure without Cowl Top Cover ...
SYSTEM DESCRIPTION . . . . . . ...
COMPONENT PARTS . . . . . . . . . ...
Component Parts Location . . . . . . . . . .
Component Description . . . . . . . . . . ..
BCM . . . . . . . . . . . . . . . . . .
Ignition Relay . . . . . . . . . . . . . . ..
Accessory Relay . . . . . . . . . . . . . .
Blower Relay . . . . . . . . . . . . . . ...
Push-Button Ignition Switch . . . . . . . . .
Stop Lamp Switch . . . . . . . . . . . . ...
Transmission Range Switch . . . . . . . . ...
Clutch Interlock Switch . . . . . . . . . . .
SYSTEM . . . . . . . . . . . . . . .
POWER DISTRIBUTION SYSTEM . . . . . . ...
POWER DISTRIBUTION SYSTEM : System Dia-
gram . . . . . . . . . . . . . . . . . .
POWER DISTRIBUTION SYSTEM : System De-
scription . . . . . . . . . . . . . . . . ...
Fail-safe . . . . . . . . . . . . . . . . ..
DIAGNOSIS SYSTEM (BCM) . . . . . . .
COMMON ITEM . . . . . . . . . . . . . . .
COMMON ITEM : CONSULT Function (BCM -
COMMON ITEM) . . . . . . . . . . . . .
INTELLIGENT KEY . . . . . . . . . . . . ...
INTELLIGENT KEY : CONSULT Function (BCM -
INTELLIGENT KEY) . . . . . . . . . . . ...
ECU DIAGNOSIS INFORMATION . . . .
BCM . . . . . . . . . . . . . . . . ...
List of ECU Reference . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . .
POWER DISTRIBUTION SYSTEM . . . . ...
Wiring Diagram . . . . . . . . . . . . . ...
BASIC INSPECTION . . . . . . . . ..
DIAGNOSIS AND REPAIR WORK FLOW . .
Work Flow . . . . . . . . . . . . . . . ...
Revision: 2011 October
2012 JUKE
PCS
PCS-3
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS . . . . . . .
B2614 ACC RELAY CIRCUIT . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
B2615 BLOWER RELAY CIRCUIT . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
B2616 IGNITION RELAY CIRCUIT . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
B2618 BCM . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B261A PUSH-BUTTON IGNITION SWITCH . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B26F1 IGNITION RELAY . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B26F2 IGNITION RELAY . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B26F6 BCM . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
PUSH-BUTTON IGNITION SWITCH . . . .
Component Function Check . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
PUSH-BUTTON IGNITION SWITCH POSI-
TION INDICATOR . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
SYMPTOM DIAGNOSIS . . . . . . . ..
PUSH-BUTTON IGNITION SWITCH DOES
NOT OPERATE . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
PUSH-BUTTON IGNITION SWITCH POSI-
TION INDICATOR DOES NOT ILLUMINATE ...
Description . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
Revision: 2011 October
2012 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст