Gear Shift Indicator — If Equipped
The clutch is not fully engaged when
NOTE:
accelerating
The engine oil flexible maintenance setting
The gear shift indicator helps the driver
is available
(if equipped). Based on the
obtain optimum fuel economy and smooth
The clutch pedal remains depressed for
engine operating conditions, the on-board
driving. It displays the selected Gear Position
two seconds or longer while driving
computer in your vehicle calculates the
1 in the instrument cluster and also notifies
Vehicles with Automatic Transmission
remaining oil life. When the engine oil flex-
the driver to change to the most suitable
ible maintenance setting is selected, the
Gear Position 2 corresponding to the actual
The gear shift indicator turns off when the
system must be reset whenever replacing the
driving condition.
following operations are performed:
engine oil.
The vehicle is stopped
NOTE:
When the engine oil flexible maintenance
Do not rely solely on the shift-up/shift-down
Manual shift mode is canceled
setting is selected, the Indicator light will
recommendations by indications. The actual
illuminate in the instrument cluster when
driving situation might require shift opera-
Manually Shifting Up (Versions with Automatic
remaining oil life becomes less than
tions different from indication. To avoid the
Transmission)
300 miles (500 km) or remaining days are
risk of accidents, the road and traffic condi-
Using the selector lever: to shift up to a
less than 15 (whichever comes first).
tions have to be judged correctly by the
higher gear, tap the selector lever back +
driver before shifting.
Reset Method
once.
Vehicles with Manual Transmission
Your vehicle is equipped with an engine oil
MAINTENANCE MONITOR
change indicator system. The
“Oil Change
The gear shift indicator turns off when the
Required” message will flash in the instrument
— IF EQUIPPED
following operations are performed:
cluster display for approximately 10 seconds
The vehicle is stopped
after a single chime has sounded to indicate
Oil Life Reset
the next scheduled oil change interval. The
The vehicle is put in neutral
Vehicles With Fiat Radio 3.0
engine oil change indicator system is duty cycle
The vehicle is driven in reverse
based, which means the engine oil change
“Oil Change” with flexible settings are avail-
interval may fluctuate, dependent upon your
able. Consult an authorized dealer for
personal driving style.
details.
87
Unless reset, this message will continue to
3. Place the ignition in the OFF/LOCK posi-
Oil Life Reset
display each time you turn the ignition
tion.
Vehicles With FIAT Connect 7.0 Radio
switch to the ON/RUN position. To reset the
NOTE:
oil change indicator system (after performing
Proceed as follows:
the scheduled maintenance), refer to the
If the indicator message illuminates when
you start the vehicle, the oil change indicator
following procedure
1. Select the icon
on the home screen to
system did not reset. If necessary, repeat
display the “Applications” screen.
1. Place the ignition in the ON position. (Do
this procedure.
not start the engine.)
2. Select
“Maintenance” to display the
maintenance list screen.
2. Fully push the accelerator pedal slowly to
the floor, three times within ten seconds.
3. Switch the tab and select the setting
item you want to change: “Scheduled,”
“Tire Rotation,” or “Oil Change.”
Oil Life Monitor
You can customize settings in the setup display as follows:
Tab
Item
Explanation
Scheduled
Setting
Notification can be turned on/off.
Time (months)
Displays the time or distance until maintenance is due. Select this item to set the
Distance (mile or km)
maintenance period. “Scheduled Due!” is displayed in red, and the indicator light
will illuminate in the instrument cluster when the remaining distance is less than
300 miles (500 km) or the remaining number of days is less than 15 (whichever
comes first).
Reset
Resets the time and distance to the initial values. Once the system turns on, it
needs to be reset whenever carrying out maintenance.
88
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Tab
Item
Explanation
Tire Rotation
Setting
Notification can be switched on/off.
Distance (mile or km)
Displays the distance until tire rotation is due. Select this item to set the tire
rotation distance.
“Tire Rotation Due!” is displayed in red and the wrench
indicator light will illuminate in the instrument cluster when the remaining
distance is less than 300 miles (500 km).
Reset
Resets the remaining distance to the initial value. Once the system turns on, it
needs to be reset whenever rotating the tires.
Oil Change
Setting
Notification can be switched on/off.
Distance (mile or km)
Displays the distance until an oil change is due. Select this item to set the oil
change distance. “Oil Change Due!” is displayed in red, and the indicator light
will illuminate in the instrument cluster when the remaining distance is less than
300 miles (500 km).
Reset
Resets the remaining distance to the initial value. Once the system turns on, it
needs to be reset whenever replacing the engine oil.
Oil life (%)
Displays the engine oil life until an oil change is due. “Oil Change Due!” is
displayed in red and the indicator light will illuminate in the instrument cluster
when remaining oil life distance is less than 300 miles (500 km), or remaining
days are less than 15 (whichever comes first).
Reset
Resets the remaining oil life to 100%. The system must be reset whenever
replacing the engine oil.
(*) The engine oil flexible maintenance setting is available (only some models). Consult an authorized dealer for details. When the engine oil
flexible maintenance setting is selected, you will see the following items in the display.
The vehicle calculates the remaining oil life based on the engine operating conditions and lets you know when an oil change is due by illu-
minating the indicator light in the instrument cluster.
89
-------------------------------------------------------------------------------------------------------------------------------------------------------------
FUEL ECONOMY MONITOR
Select the icon in the menu and perform the
Fuel Consumption Display
operation. Each icon operates as follows:
— IF EQUIPPED
Information regarding fuel economy is
1.
Hides the menu display.
displayed:
Description
2.
Displays the application screen.
1.
Displays the fuel economy for the past
The
“Fuel Consumption” information is
60 minutes:
3.
Resets the fuel economy data.
displayed by operating each icon in the
Displays the fuel economy every
display.
4.
Displays the following setting screen:
minute for the past 1 to 10 minutes.
In addition, after completing a trip, the total
ending display on/off switching - On/off
Displays the fuel economy every
energy efficiency to date is displayed in the
switching for function which synchro-
nizes reset fuel economy data to trip
10 minutes for the past
10 to
ending display when the ending display is
60 minutes.
turned on.
meter (Trip A).
2.
Displays the average fuel economy over
Proceed as follows:
the past five resets and after the current
1. Select the
icon on the home screen to
reset.
display the applications screen.
3.
Calculates the average fuel economy
2. Select the “Fuel Economy Monitor”.
every minute after vehicle travel begins,
and displays it.
3. Select the
icon on the home screen to
display the applications screen.
NOTE:
Fuel Economy Display Screen
When the menu is displayed by touching the
screen, the display is hidden automatically
after six seconds.
Average Fuel Economy Display Screen
90
-------------------------------------------------------------------------------------------------------------------------------------------------------------
NOTE:
WARNING LIGHTS AND
Vehicles With Fiat Connect 7.0
The fuel economy data is synchronized
MESSAGES
The warning contents can be verified on the
(linked) with the average fuel economy
audio system.
displayed in the trip computer.
Warning Lights And Messages
Proceed as follows:
To reset the fuel economy data, press the
NOTE:
icon in the menu. (The average fuel
1. If the warning light is turned on, select
economy displayed in the trip computer
The warning light in the instrument panel
icon on the home screen to display
resets at the same time).
appears together with a dedicated
the application screen.
message and/or acoustic signal when
When the function, which synchronizes
2. Select “Vehicle Status Monitor”
applicable. These indications are indica-
the fuel economy monitor and the trip
tive and precautionary and as such must
meter, is on, reset Trip A of the trip meter.
3. Select “Warning Guidance” to display the
not be considered as exhaustive and/or
current warnings.
Delete the average fuel economy informa-
alternative to the information contained in
tion displayed in the trip computer.
the Owner’s Manual, which you are
4. Select the applicable warning to view the
advised to read carefully in all cases.
warning details.
After resetting the fuel economy data, “-- -”
Always refer to the information in this
is displayed while the average fuel economy
chapter in the event of a failure indication.
For the following warning/indicator lights:
is calculated.
Master Warning Light
Failure indications displayed are divided
Ending Screen Display
into two categories: serious and less
Brake System Warning Light
serious failures. Serious failures are indi-
If the ending display on the fuel economy
cated by a repeated and prolonged
ABS Warning Light
monitor is on when the ignition is cycled
warning “cycle”. Less serious failures are
from ON position to the OFF position, the
Charging System Warning Light
indicated by a warning
“cycle” with a
information regarding the fuel economy is
shorter duration. The display cycle of both
Engine Oil Warning Light
displayed.
categories can be interrupted. The instru-
Electric Throttle Warning Light
ment panel warning light will stay on until
the cause of the failure is eliminated.
Cold Start Warning Light
91
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Check Engine Warning Light
Tire Pressure Monitoring System Warning
The light turns on when the ignition is
Light
switched on for an operation check, and
Coolant Temperature Warning Light
turns off a few seconds later or when the
KEY Warning Light
Automatic Transmission Warning Light
engine is started. If the light does not turn on
LED Headlight KEY Warning Light
or remains turned on, have the vehicle
Power Steering Malfunction Indicator
inspected at an authorized dealer.
Light
BSM (Blind Spot Monitoring) OFF Indi-
cator Light
NOTE:
Air Bag/Seat Belt Pretensioner System
Only for “Brake System Warning Light:” the
Warning Light
Traction Control System
(TCS)/Dynamic
light turns on continuously when the parking
Stability Control (DSC) Indicator Light
brake is applied.
Check Fuel Cap Warning Light
DSC OFF Indicator Light
Low Fuel Warning Light
Security Indicator Light
Seat Belt Warning Light
Indicator Light
Door Ajar Warning Light
Passenger Air Bag Deactivation Warning
Low Washer Fluid Level Warning Light
Light
92
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Red Warning Lights
Warning Light
What It Means
Parking Brake Warning - Warning Light Inspection/Low Brake Fluid Level Warning
Parking Brake Warning / Warning Light Inspection
The light illuminates when the parking brake is applied with the ignition switched to START or ON. It turns off when the
parking brake is fully released.
Low Brake Fluid Level Warning
If the brake warning light remains illuminated even though the parking brake is released, the brake fluid may be low or
there could be a problem with the brake system. Park the vehicle in a safe place immediately and contact an authorized
dealer.
NOTE:
Do not drive with the brake system warning light illuminated. Contact an authorized dealer to have the brakes inspected
as soon as possible. Driving with the brake system warning light illuminated is dangerous. It indicates that your brakes
may not work at all or that they could completely fail at any time. If this light remains illuminated, after checking that
the parking brake is fully released, have the brakes inspected immediately.
The effectiveness of the braking may diminish so you may need to push the brake pedal more strongly than normal to
stop the vehicle.
Stop the vehicle in a safe place immediately and contact an authorized dealer.
93
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Warning Light
What It Means
Electronic Brake-Force Distribution (EBD) System Warning
If the EBD (Electronic Brake-force Distribution) control unit determines that some components are operating incorrectly,
the control unit may illuminate the brake system warning light and the Anti Lock Brake System (ABS) warning light
simultaneously. The problem is likely to be the electronic brake force distribution system. Stop the vehicle in a safe place
immediately and contact an authorized dealer.
NOTE:
Do not drive with both the ABS warning light and brake warning light illuminated. Contact an authorized dealer to have
the brakes inspected as soon as possible. Driving when the brake system warning light and ABS warning light are illumi-
nated simultaneously is dangerous.
When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal
circumstances.
Alternator Failure
If the warning light illuminates while driving, it indicates a malfunction of the alternator or of the charging system. Drive
to the side of the road and park off the right-of-way. Stop the vehicle in a safe place immediately and contact an
authorized dealer.
NOTE:
Do not continue driving when the charging system warning light is illuminated because the engine could stop unexpectedly.
94
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст