Fiat 124 Spider (2020 year). Manual in english — page 5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Warning Light

What It Means

Low Engine Oil Pressure

This warning light indicates low engine oil pressure.

NOTE:

Do not run the engine if the oil pressure is low. Otherwise, it could result in extensive engine damage.

If the light illuminates or the warning indication is displayed while driving:

1. Drive to the side of the road and park off the right-of-way on level ground.

2. Turn off the engine and wait five minutes for the oil to drain back into the sump.

3. Inspect the engine oil level. If it's low, add the appropriate amount of engine oil while being careful not to overfill.

4. Start the engine and check the warning light.

NOTE:

Do not run the engine if the oil level is low. Otherwise, it could result in extensive engine damage.

If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and

contact an authorized dealer.

Door-Open Warning Light

The light turns on if any door is not closed securely.

Close the door securely.

95

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING!

Driving a vehicle with the red brake light

on is dangerous. Part of the brake system

may have failed. It will take longer to stop

the vehicle. You could have a collision.

Have the vehicle checked immediately.

Red Warning Lights

Warning Light

What It Means

High Engine Coolant Temperature Warning Light

The light flashes when the engine coolant temperature is extremely high, and illuminates when the engine coolant

temperature increases further.

Handling Procedure

† Flashing Light: drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine

to cool down.

† Illuminated Light: this indicates the possibility of overheating. Park the vehicle in a safe place immediately and stop the

engine. Refer to “If Your Engine Overheats” in “In Case Of Emergency” for further information.

NOTE:

Do not drive the vehicle with the high engine coolant temperature warning light illuminated. Otherwise, it could result in

damage to the engine. Contact an authorized dealer.

Air Bag/Seat Belt Pretensioner System Warning

A system malfunction is indicated if the warning light constantly flashes, constantly illuminates or does not illuminate at

all when the ignition is placed in the ON position. If any of these occur, contact an authorized dealer as soon as possible.

The system may not operate in an accident.

96

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Red Warning Lights

Warning Light

What It Means

Key Warning Light — Illuminated

If any malfunction occurs in the keyless entry system, it illuminates continuously.

NOTE:

If the key warning indicator light illuminates or the push button start indicator light (amber) flashes, the engine may not

start. Contact an authorized dealer as soon as possible.

Key Warning Light — Flashing

Advanced Key Fob Malfunction

Take the appropriate action and verify that the warning light turns off.

† The advanced key fob battery is discharged: replace the key fob battery.

† The advanced key fob is not within the operation range/is placed in areas inside the cabin where it is difficult for the key to be

detected: bring the advanced key fob into the operation range.

† A key fob from another manufacturer similar to the advanced key fob is in the operation range: take the key fob from another

manufacturer similar to the advanced key out of the operation range.

† Without the ignition switched OFF, the advanced key is taken out of the vehicle, and then all the doors are closed: bring the

advanced key fob back into the vehicle.

If the engine cannot be started, try starting it using the emergency operation for starting the engine, and contact an

authorized dealer.

Vehicle Security Alarm System

The warning light switches on to report a failure of the vehicle security alarm system. Contact an authorized dealer as soon

as possible.

97

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Amber Warning Lights

Warning Light

What It Means

ABS Warning Light

If the ABS warning light stays on while you're driving, when the ABS control unit has detected a system malfunction. If

this occurs, your brakes will function normally as if the vehicle had no ABS. Should this happen contact an authorized

dealer as soon as possible.

NOTE:

† When the engine is jump-started to charge the battery, uneven RPM occurs and the ABS warning light may illuminate.

If this occurs, it is the result of the weak battery and does not indicate an ABS malfunction. Recharge the battery.

† The brake assist system does not operate while the ABS warning light is illuminated.

Malfunction Indicator Light

If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when

the light illuminated and contact an authorized dealer.

The malfunction indicator light may illuminate in the following cases:

† The engine's electrical system has a problem.

† The emission control system has a problem.

† The fuel tank level is very low or approaching empty.

† The fuel-filler cap is missing or not tightened securely.

If the malfunction indicator light remains on, or it flashes continuously, do not drive at high speeds and contact an

authorized dealer as soon as possible.

98

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING!

CAUTION!

A malfunctioning catalytic converter, as

Prolonged driving with the Malfunction

referenced above, can reach higher

Indicator Light

(MIL) on could cause

temperatures than in normal operating

damage to the engine control system. It

conditions. This can cause a fire if you

also could affect fuel economy and

drive slowly or park over flammable

driveability. If the MIL is flashing, severe

substances such as dry plants, wood,

catalytic converter damage and power loss

cardboard, etc. This could result in death

will soon occur. Immediate service is

or serious injury to the driver, occupants or

required.

others.

99

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Amber Warning Lights

Warning Light

What It Means

Tire Pressure Monitoring System (TPMS) Warning Light — If Equipped

The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended

value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be

guaranteed.

Should one or more tires be in the condition mentioned above, the display will show the indications corresponding to each tire

in sequence.

NOTE:

Do not continue driving with one or more flat tires as handling may be compromised. Stop the vehicle, avoiding sharp braking

and steering. Repair immediately using the dedicated tire repair kit and contact an authorized dealer as soon as possible.

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure

recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. If your vehicle has tires of a

different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper

tire inflation pressure for those tires.

As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a

low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure

telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving

on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel

efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain

correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure

telltale.

The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction,

the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue

upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the

system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of

reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from

functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your

vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.

100

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CAUTION!

The TPMS has been optimized for the

original equipment tires and wheels.

TPMS pressures and warning have been

established for the tire size equipped on

your vehicle. Undesirable system operation

or sensor damage may result when using

replacement equipment that is not of the

same size, type, and/or style. Aftermarket

wheels can cause sensor damage. Using

aftermarket tire sealants may cause the

Tire Pressure Monitoring System (TPMS)

sensor to become inoperable. After using

an aftermarket tire sealant it is

recommended that you take your vehicle to

an authorized dealer to have your sensor

function checked.

101

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Amber Warning Lights

Warning Light

What It Means

Power Steering Malfunction Indicator Light

The light illuminates if the electric power steering has a malfunction. If the light illuminates, stop the vehicle in a safe

place and do not operate the steering wheel. There is no problem if the light turns off after a while. Contact an authorized

dealer if the light illuminates continuously.

NOTE:

† If the indicator light illuminates, the power steering will not operate normally. If this happens, the steering wheel can

still be operated, however, the operation may feel heavy compared to normal, or the steering wheel could vibrate when

turning.

† Repeatedly jerking the steering wheel left and right while the vehicle is stopped or moving extremely slowly will cause

the power steering system to go into protective mode which will make the steering feel heavy, but this does not indicate

a problem. If this occurs, park the vehicle safely and wait several minutes for the system to return to normal.

Amber Warning Lights

Warning Light

What It Means

Automatic Transmission Warning Light — If Equipped

The light illuminates when the transmission has a problem.

NOTE:

If the automatic transmission warning light illuminates, the transmission has an electrical problem. Continuing to drive your

vehicle in this condition could cause damage to your transmission. Contact an authorized dealer as soon as possible.

102

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Warning Light

What It Means

Master Warning Light

Vehicles Equipped With Fiat Connect 3.0 System

The warning light turns on continuously if there is a malfunction in the battery management system or there is a

malfunction in the brake switch. Contact an authorized dealer as soon as possible.

Vehicles Equipped With Fiat Connect 7.0 System

The warning light turns on when the system has a malfunction. Operate the center display and verify the content.

Contact an authorized dealer as soon as possible.

Cold Start Disable Indicator Light

When the ambient temperature is extremely low, the engine may not crank even when the engine starting procedure is

performed. At this time, the Cold Start Disable Indicator light in the instrument cluster flashes. However, this does not

indicate a problem.

NOTE:

Place your vehicle in a warm garage until the temperature has risen to a sufficient level to enable engine starting.

Electric Throttle Control Warning Light

This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the

engine is running, the light will either stay on or flash depending on the nature of the problem. Cycle the ignition key when

the vehicle is safely and completely stopped and the transmission is placed in the PARK position. The light should turn

off. If the light remains on with the engine running, your vehicle will usually be drivable; however, see an authorized dealer

for service as soon as possible.

If the light continues to flash when the engine is running, immediate service is required and you may experience reduced

performance, an elevated/rough idle, or engine stall and your vehicle may require towing. The light will come on when the

ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting,

have the system checked by an authorized dealer.

103

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Amber Warning Lights

Warning

What It Means

Lights

LED Headlight Warning Light

This light illuminates if there is a malfunction in the LED headlight. Contact an authorized dealer as soon as possible.

Blind Spot Monitoring (BSM) Off Indicator Light — If Equipped

A problem in the system may be indicated under the following conditions:

† The light does not turn on when the ignition is placed in the ON position.

† The light remains turned on even if the Blind Spot Monitoring (BSM) switch is operated.

† It turns on while driving the vehicle.

Contact an authorized dealer as soon as possible.

If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause

(the warning light illuminates). However, it does not indicate a malfunction.

Low Fuel Warning Light

The light turns on when the remaining fuel is about 2.3 gallons (9.0 liters).

The light illumination timing may vary because fuel inside the fuel tank moves around according to the driving conditions

and the vehicle posture. Add fuel.

Low Washer Fluid Level Warning Light — If Equipped

This warning light indicates that little washer fluid remains. Add washer fluid.

Cruise Control Activation — If Equipped

The warning light illuminates when the cruise control system is activated.

104

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Amber Warning Lights

Warning Light

What It Means

TCS / DSC System Indicator Light

The warning light turns on when the TCS/DSC system is active. This means that the vehicle is in critical stability and grip

conditions.

DSC Off Indicator Light

This indicator light stays on for a few seconds when the ignition is switched ON. It also illuminates when the DSC OFF

switch is pressed and TCS/DSC is switched off. For further information regarding the DSC OFF Switch, refer to “Safety

Systems” in “Safety”.

Loose Fuel Filler Cap Indicator Light

If the check fuel filler cap warning light illuminates while driving, the fuel filler cap may not be installed properly. Stop

the engine and reinstall the fuel filler cap.

Green Warning Lights

Warning Light

What It Means

Left Direction Indicator

The warning light turns on when the direction indicator control lever is moved downwards or, together with the right

direction indicator, when the hazard warning light button is pushed.

Right Direction Indicator

The warning light turns on when the direction indicator control lever is moved upwards or, together with the left direction

indicator, when the hazard warning light button is pushed.

105

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Warning Light

What It Means

Parking Lights And Normal Beam Headlights

The warning light turns on when parking lights or normal beam headlights are turned on.

Cruise Control — If Equipped

The warning light turns on when a cruising speed has been set.

Key Indicator Light

The warning light turns on when the engine is ready to start.

Warning Light Flashing

When the keyless START/STOP button is pushed from ON to ACC or OFF position, the warning light may flash for

approximately 30 seconds indicating that the remaining battery power of the key is low. Replace with a new battery before

the key becomes unusable.

Blue Warning Light

Warning Light

What It Means

High Beam Headlights

The warning light switches on when the high beam headlights are turned on.

Low Engine Coolant Temperature Indicator Light

The light illuminates continuously when the engine coolant temperature is low and turns off after the engine is warm.

If the low engine coolant temperature indicator light remains illuminated after the engine has been sufficiently warmed

up, the temperature sensor could have a malfunction. Contact an authorized dealer.

106

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Warning Light (Red Color) On Dashboard Trim

Warning Light

What It Means

Seat Belt Warning Light

The seat belt warning light turns on if the driver or passengers seat is occupied and the seat belt is not fastened with the

ignition placed in the ON position.

If the driver or passengers seat belt is unfastened (only when the passenger seat is occupied) and the vehicle is driven at

a speed faster than about 12 mph (20 km/h), the warning light flashes. After a short time, the LED stops flashing, but

remains illuminated.

If a seat belt remains unfastened, the LED flashes again for a given period of time.

If the driver or passengers seat belt is unfastened after the LED turns on, and the vehicle speed exceeds 12 mph (20 km/h),

the LED flashes again.

With Passenger Occupant Classification System: to allow the passenger occupant classification sensor to function properly,

do not place and sit on an additional seat cushion on the passengers seat. The sensor may not function properly because

the additional seat cushion could cause sensor interference.

Without Passenger Occupant Classification System: placing heavy items on the passengers seat may cause the passengers

seat belt warning function to operate depending on the weight of the item. To allow the passengers seat weight sensor to

function properly, do not place and sit on an additional seat cushion on the passengers seat. The sensor may not function

properly because the additional seat cushion could cause sensor interference. If a small child is seated on the passengers

seat, the warning light may not operate.

Fasten the seat belts.

Warning Light (Amber Color) On Instrument Cluster Trim

Warning Light

What It Means

Passenger Air Bag Deactivation Indicator Light

The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the

engine is started. If the light does not turn on or remains turned on, contact an authorized dealer.

107

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Message Indicated On Display — If

Warning Sound Is Activated

Contact an authorized dealer as soon as

Equipped With Fiat Connect 7.0 System

possible.

Lights-On Reminder

Message Indicated On Display

CAUTION!

If lights are on and the ignition is placed in

If a message is displayed in the center

the ACC position, or the ignition is placed in

Do not drive the vehicle with the air bag/

display, take appropriate action (in a calm

the OFF position, a continuous beep sound

seat belt pretensioner system warning

manner) according to the displayed

will be heard when the driver's door is

beep sounding. Driving the vehicle with

message.

opened.

the air bag/seat belt pretensioner system

If the following messages are displayed in

warning beep sounding is dangerous. In a

NOTE:

the center display, a vehicle system may be

collision, the air bags and the seat belt

malfunctioning:

† When the ignition is placed in the ACC

pretensioner system will not deploy and

position, the

“Ignition Not Cycled Off

this could result in death or serious injury.

† Engine Coolant Temperature High: displays

Warning Beep” overrides the lights-on

Contact an authorized dealer as soon as

if the engine coolant temperature has

reminder.

possible.

increased excessively.

† Charging System Malfunction: displays if

† A personalized function is available to

Seat Belt Warning Beep

change the sound volume for the lights-on

the charging system has a malfunction.

reminder.

Except Mexico

† Temperature Warning: the following

Air Bag/Seat Belt Pretensioner System Warning

If the driver's seat belt is not fastened when

message is displayed when the tempera-

ture around the center display is high.

Beep

the ignition is in the ON position, a beep

Lowering the temperature of the inside of

sound will be heard for about six seconds.

If there is a problem with the air bag/seat

the vehicle or the temperature around the

belt pretensioner systems and the warning

If the driver or the passengers seat belt is not

center display by avoiding direct sunlight

light illumination, a warning beep sound will

fastened and the vehicle is driven at a speed

is recommended.

be heard for about five seconds every

faster than about 12 mph (20 km/h), a beep

minute.

sound will be heard again for a specified

Stop the vehicle in a safe place and contact

an authorized dealer.

period of time.

The air bag and seat belt pretensioner

system warning beep sound will continue to

be heard for approximately

35 minutes.

108

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Until a seat belt is fastened or a given period

Until a seat belt is fastened or a given period

Left in this condition, the keyless entry

of time has elapsed, the beep sound will not

of time has elapsed, the beep sound will not

system will not operate, the car cannot be

stop even if the vehicle speed falls below

stop even if the vehicle speed falls below

locked, and the battery power will be

12 mph (20 km/h).

12 mph (20 km/h).

depleted.

NOTE:

WARNING!

Key Removed From Vehicle Warning Beep

† To allow the passenger occupant classifi-

† Placing heavy items on the front

Vehicles With Advanced Keyless Function

cation sensor to function properly, do not

passenger seat may cause the front

If the key is taken out of the vehicle while the

place and sit on an additional seat cushion

passenger seat belt warning function to

ignition is not switched OFF and all the doors

on the passengers seat. The sensor may

operate depending on the weight of the

are closed, the beep which sounds outside of

not function properly because the addi-

item.

the vehicle will be heard six times, and the

tional seat cushion could cause sensor

† To allow the front passenger seat weight

beep which sounds inside the vehicle will be

interference.

sensor to function properly, do not place

heard six times, and the KEY warning light

† If a small child is seated on the passen-

and sit on an additional seat cushion on

(red)

will flash continuously in the instru-

gers seat, the warning beep may not

the front passenger seat. The sensor may

ment cluster to notify the driver that the igni-

operate.

not function properly because the addi-

tion has not been switched OFF.

tional seat cushion could cause sensor

Mexico

Vehicles Without Advanced Keyless Function

interference.

If the vehicle speed exceeds about 12 mph

† When a small child sits on the front

If the key is taken out of the vehicle while the

(20 km/h) with the driver or passengers seat

passenger seat, it is possible that the

ignition is not switched OFF and all the doors

belt unfastened, a warning beep sounds

warning beep will not operate.

are closed, a beep will be heard inside the

continuously. If the seat belt remains unfas-

vehicle 6 times and the KEY warning light

tened, the beep sound stops once and then

(red)

will turn on continuously in the

Ignition Not Switched OFF

continues for about 90 seconds. The beep

instrument cluster to notify the driver that

stops after the driver or passengers seat belt

If the driver's door is opened while the igni-

the ignition has not been switched OFF.

is fastened.

tion is placed in the ACC position, a contin-

uous beep sound will be heard to notify the

driver that the ignition has not been placed

in the OFF position.

109

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:

key fob function, perform the applicable

You can change the vehicle speed setting at

Because the key fob uses low-intensity radio

procedure. See paragraph “Keys” in “Getting

which the warning is triggered. See para-

waves, the warning may activate if the key

To Know Your Vehicle” chapter.

graph “Trip Computer” in “Getting To Know

fob is carried together with a metal object or

Your Vehicle” chapter.

Key Left-In-Vehicle Warning Beep

it is placed in a poor signal reception area.

(with the advanced keyless function)

Tire Inflation Pressure Warning Beep

— If

Request Switch Inoperable Warning Beep — If

Equipped

If a key fob is left in the vehicle and all the

Equipped With Advanced Keyless Function

doors and the trunk are locked using a sepa-

Vehicle With Conventional Tires: the warning

If the request switch on the exterior door

rate key fob, a beep sound is heard for about

beep sound will be heard for about three

handle is pushed with a door open, or the

10 seconds to remind the driver that the key

seconds when there is any abnormality in tire

ignition has not been placed in the OFF posi-

fob has been left in the vehicle.

inflation pressures. See “TPMS” in “Safety”

tion, a beep will be heard for about two

chapter.

If this happens, open the door and remove

seconds to indicate that the doors, and trunk

the key fob. A key fob removed from the

Vehicle With Run-Flat Tires (If Equipped): the

lid cannot be locked.

vehicle this way may not function because its

warning beep sound will be heard for about

Key Left-In-Trunk Compartment Warning Beep

functions may have been temporarily

three seconds if the tire pressures decrease.

— If Equipped With Advanced Keyless Function

suspended.

If the tire pressure decreases extremely, a

beep sound will be heard for approximately

If the key fob is left in the trunk with all doors

Perform the applicable procedure to restore

30 seconds. See

“TPMS” in

“Safety”

locked and the trunk lid closed, a beep

the functions of the key fob. See paragraph

chapter.

sound is heard for about

10 seconds to

“Keys” in “Getting To Know Your Vehicle”

remind the driver the key fob has been left in

chapter.

Blind Spot Monitoring (BSM) System Warning

the trunk.

Beep — If Equipped

Vehicle Speed Alarm — If Equipped

If this happens, open the trunk lid by

Driving Forward: the warning beep operates

The vehicle speed alarm function is designed

pushing the electric trunk lid opener and

when the direction indicator lever is operated

to alarm the driver via a single beep sound

remove the key fob.

to the side where the Blind Spot Monitoring

and a warning indication in the instrument

(BSM) warning light is illuminated.

A key fob removed from the trunk may not

cluster that the previously set vehicle speed

function because its functions may have

has been exceeded.

been temporarily suspended. To restore the

110

-------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Settings Change Method

Item

Feature

Factory Setting

Available Settings

1

2

3

Safety

Blind Spot Monitoring

Warning Beep Volume

High

High/Low/Off

A

—

X

System (if equipped)

(*)

Vehicle

Lock: When Driving/

Unlock: In Park/Lock:

Operation condition of

Out of Park Unlock: In

Lock: When Driving/

Door Locks

auto lock/unlock

Park/Lock: Shifting Out

A

C

X

Unlock: IGN Off

function

of Park/ Lock: When

Driving Unlock: IGN Off/

Lock: When Driving/Off

Time for locking door

90 seconds/60 seconds/

Keyless Entry System

30 seconds

A

—

X

automatically

30 seconds

Time for locking door

90 seconds/60 seconds/

30 seconds

A

—

X

automatically

30 seconds

Auto-lock function

Advanced Keyless Entry

operation/non

Off

On/Off

A

—

X

System

operational

Beep volume when

Off or Medium

High/Medium/Low/Off

A

D/E

X

locking/unlocking

112

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Settings Change Method

Item

Feature

Factory Setting

Available Settings

1

2

3

Time until interior lights

60 seconds/30 seconds/

turn off after closing

15 seconds

A

—

X

15 seconds/7.5 seconds

door

Illuminated Entry

Time until interior lights

System

turn off automatically

60 minutes/30 minutes/

30 minutes

A

—

X

when any door is not

10 minutes

closed completely

Operational/

Auto-Wiper Control

On

On/Off (**)

A

—

X

non-operational

Daytime Running Lights

Operational/

On

On/Off

—

—

X

(DRL)

non-operational

120 seconds/90

Time until headlights

seconds/60 seconds/

Auto headlight off (***)

30 second

A

—

X

turn off

30 seconds/

Off (****)

Timing by which lights

High/Med. High/

Auto-Light Control

Medium

A

—

X

turn on

Medium/Med. Low/Low

Adaptive Front Lighting

Operational/

On

On/Off

A

—

X

System (AFS)

non-operational (***)

Lights-On Reminder

Warning beep volume

High

High/Low/Off

A

—

X

120 seconds/90

Time until headlights

Coming Home System

30 seconds

seconds/60 seconds/

A

—

X

turn off

}30 seconds/Off

113

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Settings Change Method

Item

Feature

Factory Setting

Available Settings

1

2

3

Leaving Home Light

Operational/

On or Off

On/Off

A

—

X

System

Non-operational

Turn Signals

Beep volume

Low

High/Low

A

—

X

Operational/

Three-Flash Turn Signal

On or Off

On/Off

A

—

X

Non-operational

System

Language indicated in

Depends on

Language

English

A

—

X

display

market (****)

Temperature unit

Temperature

°C

°F/°C

A

—

X

indicated in display

Distance unit indicated

Distance

mi or km

mi/km

A

—

X

in display

Fuel Economy Monitor

Ending Display

On/Off

Off

On/Off

B

—

X

Linkage/non-linkage

Fuel Economy Resetting

with fuel economy reset

Off

On/Off

B

—

X

Procedure

and trip meter reset

(—) Feature setting change not available.

(*) Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear

Cross Traffic Alert (RCTA) operation cannot be changed.

(**) If the auto-wiper control is set to Off, the wiper lever AUTO position is set to intermittent operation.

(***) Though these systems can be turned Off, doing so will defeat the purpose of the system and FCA recommends that these systems remain On.

(****) Available only in display from the center display.

114

-------------------------------------------------------------------------------------------------------------------------------------------------------------

ONBOARD DIAGNOSTIC

CAUTION! (Continued)

WARNING! (Continued)

SYSTEM — OBD II

† If the MIL is flashing while the vehicle is

† Be possible that vehicle systems,

running, severe catalytic converter

including safety related systems,

Your vehicle is equipped with a sophisticated

damage and power loss will soon occur.

could be impaired or a loss of vehicle

Onboard Diagnostic system called OBD II.

Immediate service is required.

control could occur that may result in

This system monitors the performance of the

an accident involving serious injury

emissions, engine, and automatic transmis-

Onboard Diagnostic System (OBD II)

or death.

sion control systems. When these systems

are operating properly, your vehicle will

Cybersecurity

† Access, or allow others to access,

provide excellent performance and fuel

information stored in your vehicle

Your vehicle is required to have an Onboard

economy, as well as engine emissions well

systems, including personal informa-

Diagnostic system (OBD II) and a connection

within current government regulations.

tion.

port to allow access to information related to

If any of these systems require service, the

the performance of your emissions controls.

For further information, refer to “CyberSecu-

OBD II system will turn on the Malfunction

Authorized service technicians may need to

rity” in “Tips, Controls, and General Informa-

Indicator Light (MIL). It will also store diag-

access this information to assist with the

tion” in your Owner’s Manual Radio

nostic codes and other information to assist

diagnosis and service of your vehicle and

Supplement.

your service technician in making repairs.

emissions system.

Although your vehicle will usually be drivable

WARNING!

EMISSIONS INSPECTION

and not need towing, see an authorized

dealer for service as soon as possible.

AND MAINTENANCE

† ONLY an authorized service technician

should connect equipment to the OBD II

PROGRAMS

CAUTION!

connection port in order to read the VIN,

† Prolonged driving with the MIL on could

diagnose, or service your vehicle.

In some localities, it may be a legal require-

cause further damage to the emission

ment to pass an inspection of your vehicle's

† If unauthorized equipment is connected

control system. It could also affect fuel

emissions control system. Failure to pass

to the OBD II connection port, such as a

economy and driveability. The vehicle

could prevent vehicle registration.

driver-behavior tracking device, it may:

must be serviced before any emissions

(Continued)

tests can be performed.

(Continued)

115