Fiat Tipo 4Door (2021 year). Manual in english — page 4
KNOWING THE INSTRUMENT PANEL
58
11)
Go to a Fiat Dealership as soon as
possible if warning light
either does not
light up when the ignition device is turned
to MAR to if while travelling the warning
lights comes on either steady or blinking
(along with a message on the display).
59
Green Warning Lights
Warning light
What it means
green
“DUALDRIVE” ELECTRIC POWER STEERING SYSTEM ACTIVATION
The indication CITY switches on when the "Dualdrive" electric power steering system is activated by pressing the
relative control button. If the button is pressed again the word CITY goes out.
green
PETROL SWITCHOVER
(for LPG versions only)
The warning light turns on when the engine is petrol fuelled.
green
SIDE LIGHTS AND DIPPED BEAM HEADLIGHTS
The warning light switches on when the side/tail lights or dipped headlights are turned on.
This function allows the headlights to remain on for 30, 60 or 90 seconds after the ignition device was placed in
STOP position ("Follow me home" function).
green
FOG LIGHTS
The warning light comes on when the front fog lights are turned on.
green
AUTOMATIC MAIN BEAM HEADLIGHTS
This warning light comes on when the automatic main beam headlights are activated.
green
LEFT DIRECTION INDICATOR
The warning light switches on when the direction indicator stalk is moved downwards or, together with the right
direction indicator, when the hazard warning light button is pressed.
KNOWING THE INSTRUMENT PANEL
60
Warning light
What it means
green
RIGHT DIRECTION INDICATOR
The warning light switches on when the direction indicator stalk is moved upwards or, together with the left
direction indicator, when the hazard warning light button is pressed.
61
Blue warning lights
Warning light
What it means
blue
MAIN BEAM HEADLIGHTS
The warning light switches on when the main beam headlights are turned on.
KNOWING THE INSTRUMENT PANEL
62
SYMBOLS AND MESSAGES ON THE DISPLAY
Symbol
What it means
red
AIRBAG FAILURE
The symbol switches on, together with a message on the display, in cause of an air bag system failure. Contact a
Fiat Dealership as soon as possible.
red
LOW ENGINE OIL PRESSURE
The symbol switches on, together with a message on the display, if there is insufficient engine oil pressure.
16)
IMPORTANT Do not use the car until the failure has been solved. The switching on of the symbol does not show
the quantity of oil in the engine: the oil level must be checked manually.
red
ALTERNATOR FAILURE
The switching on of the symbol with engine on corresponds to an alternator failure. Contact a Fiat Dealership as
soon as possible.
red
DOORS OPEN
The symbol switches on when one or more doors are not completely shut. An acoustic signal is activated with
the doors open and the car moving. Close the doors properly.
red
BONNET NOT PROPERLY SHUT
The symbol switches on when the engine bonnet is not properly shut (for versions/markets, where provided).
Close the bonnet properly.
red
TAILGATE NOT PROPERLY SHUT
The symbol switches on when the tailgate is not properly shut (for versions/markets, where provided). Close the
tailgate correctly.
63
Symbol
What it means
red
AUTOMATIC TRANSMISSION FAILURE / DUAL CLUTCH AUTOMATIC TRANSMISSION FAILURE
The symbol appears on the instrument panel display together with a dedicated message and an acoustic warning
to indicate an automatic transmission or dual clutch automatic transmission failure. Contact a Fiat Dealership as
soon as possible.
red
DAA SYSTEM (Drive Attention Assist) INTERVENTION
The symbol appears on the instrument panel display when the DAA (Drive Attention Assist) system is activated.
The system, after estimating the driver’s drowsiness level, through specific events, suggests to the driver to
stop for a break, because continuing driving is risky. Stop to pause while driving, pulling the car over in safe
conditions.
17)
red
HANDS NOT DETECTED ON STEERING WHEEL
(for versions/markets, where provided)
The symbol appears on the instrument panel display if the driver’s hands are not detected on the steering wheel.
amber
DAA SYSTEM (Drive Attention Assist) FAILURE
The symbol comes on in the event of a DAA (Driver Attention Assist) system failure. Contact a Fiat Dealership.
amber
KEYLESS ENTRY/GO SYSTEM FAILURE
The symbol comes on in the event of a Keyless Entry/Go system failure. Contact a Fiat Dealership as soon as
possible.
amber
ENGINE OIL PRESSURE SENSOR FAILURE
The symbol switches on constantly together with the message in the display in the case of engine oil pressure
sensor failure.
amber
AUTOMATIC TRANSMISSION FLUID OVERHEATING / DUAL CLUTCH AUTOMATIC TRANSMISSION FLUID
OVERHEATING
The symbol switches on in the case of transmission overheating, after a particularly demanding use. In this case
an engine performance limitation is carried out. With engine off or at idle speed, wait until the symbol switches
off.
KNOWING THE INSTRUMENT PANEL
64
Symbol
What it means
amber
RAIN SENSOR FAILURE
The symbol switches on in the case of failure of the rain sensor. Contact a Fiat Dealership as soon as possible.
amber
FUEL CUT-OFF SYSTEM OPERATION
The symbol switches on in the event of fuel cut-off system intervention.
For reactivating the fuel cut-off system, refer to the description in the "Fuel cut-off system" section in the "In an
emergency" chapter. If it is still not possible to restore the fuel supply, contact a Fiat Dealership.
amber
FUEL CUT-OFF SYSTEM FAILURE
The symbol switches on in the event of fuel cut-off system failure. Contact a Fiat Dealership as soon as possible.
amber
START&STOP SYSTEM FAILURE
(for versions/markets, where provided)
The symbol switches on to report a failure of the Start&Stop system. The display will show a dedicated message.
Contact a Fiat Dealership as soon as possible.
amber
EXTERNAL LIGHTS FAILURE
The symbol switches on to indicate a failure on the following lights: daytime running lights (D.R.L.); parking lights;
side lights; direction indicators; rear fog light; reversing light; number plate lights.
The anomaly may be caused by a blown bulb, a blown protection fuse or an interruption of the electrical
connection.
amber
FUEL LEVEL SENSOR FAILURE
The symbol switches on in the event of fuel level sensor failure. Contact a Fiat Dealership.
amber
LPG FUEL LEVEL SENSOR FAILURE
The symbol switches on in the event of LPG fuel level sensor failure. Contact a Fiat Dealership.
amber
WATER IN DIESEL FILTER (Diesel versions)
The warning light or symbol switches on constantly while driving (along with a message in the display), to indicate
the presence of water in the Diesel filter.
12)
65
Symbol
What it means
amber
POSSIBLE ICE ON ROAD
The symbol turns on when the external temperature falls to or below 3
°
C.
WARNING
In the event of outside temperature sensor failure, the digits that indicate the value are replaced by dashes.
amber
FIAT CODE SYSTEM FAILURE
The symbol switches on to indicate a failure of the Fiat CODE system. Contact a Fiat Dealership as soon as
possible.
amber
DUSK SENSOR FAILURE
The symbol switches on along with a dedicated message on the display in the event of dusk sensor failure.
Contact a Fiat Dealership as soon as possible.
amber
AUDIO SYSTEM FAILURE
The symbol switches on to report a failure of the sound system. Contact a Fiat Dealership as soon as possible.
amber
PARK ASSIST SYSTEM FAILURE
The yellow symbol comes on in the event of a temporary Park Assist system failure. Contact a Fiat Dealership if
the problem persists after cleaning the parking sensor area.
The red symbol comes on in the event of a permanent Park Assist system failure. The system malfunction might
be due to the battery voltage being too low or other faults in the electrical system. Contact a Fiat Dealership as
soon as possible.
amber
AUTONOMOUS EMERGENCY BRAKE CONTROL (AEB Control) SYSTEM FAILURE
The yellow symbol comes on (together with a message on the display) in the event of a temporary Autonomous
Emergency Brake Control (AEB Control) system failure. Contact a Fiat Dealership as soon as possible.
The red symbol comes on (together with a message on the display) in the event of a permanent Autonomous
Emergency Brake Control (AEB Control) system failure. Contact a Fiat Dealership as soon as possible.
KNOWING THE INSTRUMENT PANEL
66
Symbol
What it means
amber
BLIND SPOT ASSIST SYSTEM FAILURE
The symbol comes on (on some versions together with a dedicated message) in the event of Blind Spot Assist
system failure. Contact a Fiat Dealership as soon as possible.
amber
SPEED LIMITER FAILURE
The symbol switches on in the case of failure of the Speed Limiter device. Contact a Fiat Dealership as soon as
possible to have the failure eliminated.
amber
TRAFFIC SIGN RECOGNITION SYSTEM FAILURE (where provided)
The symbol comes on, on some versions together with a message, in the event of Traffic Sign Recognition
system failure. Contact a Fiat Dealership as soon as possible.
amber
LANE CONTROL SYSTEM (where provided)
The
symbol will be solid yellow when the car is approaching a lane marker. The symbol will flash when the car
is crossing the lane marker. Refer to “Lane Control" in “Starting and driving” for more information.
amber
LANE CONTROL SYSTEM FAILURE (where provided)
The symbol comes on in the event of a Lane Control system failure. Contact a Fiat Dealership as soon as
possible.
amber
ADAPTIVE CRUISE CONTROL FAILURE
The symbol appears along with a message on the display in case of an Adaptive Cruise Control system failure. In
this case, contact the Fiat Dealership as soon as possible.
amber
ADAPTIVE CRUISE CONTROL (ACC) FAILURE
(where provided)
The symbol lights up to indicate a failure of the Adaptive Cruise Control (ACC) failure. Contact a Fiat Dealership.
67
Symbol
What it means
amber
SCHEDULED SERVICING (SERVICE)
The “Service Schedule” includes vehicle maintenance at fixed intervals (refer to the "Maintenance and care"
chapter).
When the next scheduled service is approaching, the symbol will be displayed, followed by the number of
kilometres/miles or days (where provided) left, when the ignition device is turned to MAR.
This is displayed automatically, with ignition device at MAR, 2000 km before servicing or, where provided, 30
days before servicing. It is also displayed each time the ignition device is turned to MAR.
The display will be in km or miles according to the unit of measurement set. Go to a Fiat Dealership, where the
"Service Schedule" operations will be performed and the message will be reset.
amber
CLUTCH PEDAL
This symbol lights up to indicate that the clutch pedal must be pressed to enable starting for versions with
manual gearbox.
amber
DPF CLEANING (particulate trap) in progress (diesel versions with DPF only)
The symbol switches on constantly to indicate that the DPF system needs to eliminate the trapped pollutants
(particulate) through the regeneration process.
The symbol stays off during the entire DPF regeneration
and lights up only when driving conditions require the driver to be notified
.
The symbol does not switch on during every DPF regeneration, but only when driving conditions require that
the driver is notified. To turn off the symbol, keep the car in motion until the regeneration process is over. The
process normally takes about 15 minutes. Optimal conditions for completing the process are achieved by
travelling at 60 km/h with engine speed above 2000 rpm.
When this symbol switches on, it does not indicate a defect of the car and thus it should not be taken to a
workshop. On some versions, together with the symbol switching on, the display shows a dedicated message.
Failure to observe the appropriate procedure for a long distance when the
symbol
comes on, can cause the warning light to come on, resulting in the need to go to a Fiat Dealership to
restore correct DPF operation.
KNOWING THE INSTRUMENT PANEL
68
Symbol
What it means
amber
GPF CLEANING (particulate filter) in progress (petrol versions only with GPF) (where provided)
The symbol lights up fixed, and a message appears on the display, to notify the driver that the GPF system
needs to eliminate captured pollutants (particulate) through the regeneration process.
The symbol does not light up on during every GPF regeneration, but only when driving conditions require that the
driver is notified.
To turn off the symbol, keep the car in motion until the regeneration process is over. The optimal conditions for
completing the process are achieved by varying the speed of the car (press and release the accelerator pedal).
Hold a speed faster than 60 km/h, on extra-urban roads, with the engine running fastener than 2000 rpm, until
the symbol and the message disappear from the display.
When this symbol switches on, it does not indicate an anomaly and thus it should not be taken to a workshop.
GPF FAILURE (particulate filter) (petrol versions only with GPF) (where provided)
The symbol lights up fixed together with the warning light and dedicated messages appear on the display in case
of failure to the GPF (Gasoline Particulate Filter).
In this case, contact a Fiat Dealership as soon as possible.
amber
INDICATION OF DIESEL EMISSIONS ADDITIVE LOW LEVEL (UREA)
(for versions/markets, where provided)
The Diesel Emissions Additive (UREA) low level symbol lights when the UREA level is low.
Top up the UREA tank as soon as possible with at least 5 litres of UREA. If topping up is done with remaining
range of UREA in the tank equal to zero, you may need to wait 2 minutes before starting the vehicle.
amber
AUTOMATIC MAIN BEAM HEADLIGHTS FAILURE
The symbol switches on to report a failure of the automatic main beam headlights. Contact a Fiat Dealership as
soon as possible.
69
Symbol
What it means
amber
DEGRADED ENGINE OIL (where provided)
Diesel versions
: the symbol is displayed on some versions, along with a dedicated message displaying. The
symbol is displayed for 3 minute cycles and intervals of 5 seconds until oil is changed. The symbol is displayed
until the problem is solved.
Petrol versions
: the symbol switches on and then is not displayed when the display cycle is completed.
IMPORTANT After the first indication, each time the engine is started the symbol will continue to switch on as
described above until the oil is changed. On certain versions a dedicated message is displayed.
If the symbol flashes, this does not mean that there is a fault on the vehicle, rather it simply reports that it is now
necessary to change the oil as a result of regular use of the vehicle. The deterioration of engine oil is accelerated
by using the car for short drives, preventing the engine from reaching operating temperature. Contact a Fiat
Dealership as soon as possible.
13) 14)
green
INTELLIGENT SPEED ASSIST SYSTEM ACTIVATION
(where provided)
The symbol comes on in the event of a Intelligent Speed Assist system failure.
green
ELECTRONIC CRUISE CONTROL
The symbol comes on in the event of a Cruise Control system failure.
green
SPEED LIMITER
The symbol comes on in the event of a Speed Limiter system failure.
green
LANE CONTROL SYSTEM
(where provided)
The Lane Control symbol comes on continuously green when one or both lane markings have been detected and
the system is active and ready to provide visual and torque warnings if an unintentional lane departure occurs.
Refer to the “Lane Control System” chapter in the “Starting and driving” section for further information.
KNOWING THE INSTRUMENT PANEL
70
Symbol
What it means
white
LANE CONTROL SYSTEM
(where provided)
When the Lane Control system is active but not enabled, the symbol comes on continuously white. This occurs
when only left, right, or neither lane line has been detected. If a single lane line is detected, the system is ready to
provide only visual warnings if an unintentional lane departure occurs on the detected lane line.
Refer to the “Lane Control System” chapter in the “Starting and driving” section for further information.
white
HEADLIGHT HEIGHT
The symbol indicates the height of the dipped beam headlights, set to four levels (0-4) using buttons
and
.
white
GEAR SHIFT ADVICE
This symbol appears to suggest engaging a higher gear (upshifting).
white
GEAR SHIFT ADVICE
The symbol appears to suggest engaging a lower gear (downshifting).
white
SPEED LIMIT EXCEEDED
The (white) symbol switches on when the speed limit (e.g. 110 km/h) set through the menu of the display is
exceeded (the inner value updates according to the set speed).
white
START&STOP SYSTEM ACTIVATION
(for versions/markets, where provided)
The symbol comes on to indicate that the engine has been stopped by the START&STOP system.
white
HEADLIGHT ALIGNMENT ADJUSTMENT
The headlight alignment corrector operates with ignition device at MAR and dipped headlights on. To adjust,
press buttons
and
on the control panel.
white
ELECTRONIC CRUISE CONTROL
The symbol appears when the electronic Cruise Control is turned on.
71
12)
The presence of water in the fuel
system circuit may cause severe damage
to the injection system and irregular engine
operation. If the
symbol is displayed
contact a Fiat Dealership as soon as
possible to bleed the system. If the
above indications come on immediately
after refuelling, water has probably been
poured into the tank: switch the engine off
immediately and contact a Fiat Dealership.
13)
Degraded engine oil should be
replaced as soon as possible after the
warning light
comes on, and never
more than 500 km after it first comes
on. Failure to observe the above may
result in severe damage to the engine and
invalidate the warranty.
Remember that
when this warning light comes on, it
does not mean that the level of engine
oil is low, so if it flashes it does not
mean that you need to top up the
engine oil
.
14)
If the warning light flashes when
driving, contact a Fiat Dealership.
KNOWING THE INSTRUMENT PANEL
72
Messages on display
What it means
What to do
INDICATION OF DIESEL EMISSIONS ADDITIVE LOW
LEVEL (UREA)
(for versions/markets, where provided)
When low UREA level is detected, a text message will
appear on the instrument panel display, together with
the symbol
to indicate that UREA must be topped
up.
The symbol
stays on until the tank is topped up
with at least 5 litres of UREA.
If you do not top up, a specific message will appear
on the instrument panel display whenever a certain
threshold is reached until it will no longer be possible
to start the engine.
A message appears continuously on the display
when the residual range is approximately 200 km
accompanied by an auditory indication.
When the residual range is 0 km, a specific message
will appear on the display (for versions/markets, where
provided). It will no longer be possible to restart the
engine after it has been stopped.
It will be possible to restart the engine after pouring at
least 5 litres of UREA in the tank.
Top up the AdBlue® (UREA) tank as soon as possible
with at least 5 litres. If topping up is done with
remaining range of AdBlue® (UREA) in the tank equal to
zero, you may need to wait 2 minutes before starting
the engine.
18)
BLIND SPOT ASSIST
BLIND SPOT ASSIST SYSTEM
(where provided)
Sensor block
A message will appear on the display if the Blind
Spot Assist system sensor is blocked. In this case,
the LEDs on the door mirrors are switched on
continuously.
Free the bumper of any obstacles or clean it.
73
What it means
What to do
BLIND SPOT ASSIST
System not available
A message will appear on the display if the Blind
Spot Assist system sensor is not available. In this
case, the LEDs on the door mirrors are switched on
continuously.
The failed operation of the system might be due to the
insufficient voltage from the battery or other failures on
the electrical system. Contact a Fiat Dealership as soon
as possible to have the electrical system checked.
Blind Spot Assist system failure
A message will appear on the display if the Blind Spot
Assist system sensor is faulty. In this case, the LEDs
on the door mirrors are switched off. An acoustic
warning will also sound.
Contact a Fiat Dealership as soon as possible to have
the failure eliminated.
LANE CONTROL
LANE CONTROL SYSTEM
(where provided)
Camera obstructed
A dedicated message is shown on the display in the
case of dirt on the windscreen, which may adversely
affect correct operation of the camera.
Clean the windscreen using a soft clean cloth, taking
care not to scratch it. Should the failure persist, contact
a Fiat Dealership as soon as possible.
System not available
A dedicated message is shown on the display if the
Lane Control system is not available.
Contact a Fiat Dealership as soon as possible.
AUTONOMOUS
EMERGENCY BRAKE
CONTROL
AUTONOMOUS EMERGENCY BRAKE CONTROL
SYSTEM (AEB Control)
The “BRAKE!” message appears on the display when
the Autonomous Emergency Brake Control (AEB
Control) system is activated.
Increase your distance from the vehicle ahead to
prevent the risk of collisions.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст