Freightliner Business Class. Manual — part 8
See
for lubrication points (not on FL112).
No.
MOP No.
Component
Remarks
*
1
Front Suspension Spring Pins
and Shackle Pins
†
Lube both sides of vehicle; one grease fitting for each spring pin;
two grease fittings for each shackle.
2
Drag Link
Two grease fittings; one on each end.
3
Power Steering
Check fluid level in reservoir (46–03); change fluid and filter (46–
04), when required. Lubricate steering gear (46–05).
4
Steering Driveline
Lubricate grease fittings at slip-joint splines and both universal
joints. Lubricate miter gear (if applicable).
5
Slack Adjusters, Front Axle
Lubricate both sides of axle; one grease fitting for each slack
adjuster.
6
Camshaft Brackets, Front Axle
Lubricate both sides of axle; one grease fitting for each camshaft
bracket.
7
Oil-Lubricated All-Wheel-Drive
Front Axle
Check oil level; add oil if low (33–05). Change oil (33–06) when
required.
2
3
4
4
4
5
6
7
8
9
10
1011
12
13
14
12
13
12
15
16
18
21
20
19
3
1
1
12
22
23
17
f000271
09/15/97
Fig. 1, Lubrication Points (all models but FL112)
General Information
00
Lubrication Tables: 00–18
00/27
No.
MOP No.
Component
Remarks
*
8
Tie Rod
Two grease fittings; one on each end of tie rod.
9
Knuckle Pins
Two grease fittings; one on top, one on bottom of knuckle pin.
Lubricate both sides of axle.
10
Clutch Release Bearing and
Release Cross-Shaft
One grease fitting on bottom of release bearing. Two grease
fittings on release cross-shaft.
11
Transmission
Check fluid level; add fluid, if low (26–01). Change fluid (26–02,
26–05, 26–06, 26–08, or 26–10), when required.
12
Driveline U-Joints and Slip-Joints
One grease fitting for each U-joint, and one for each slip-joint.
13
Door Hinges, Latches, and
Weatherstrips
Lubricate all door hinges, latches, and weatherstrips on the cab.
14
Batteries
Clean and lubricate if corrosion is present.
15
Air Reservoir Automatic Drain
Valves
Disassemble, clean, inspect, and lubricate automatic drain valves.
16
Suspension Spring Pin
Lubricate on both sides of vehicle; one grease fitting for each
spring pin.
17
Equalizer
†
One grease fitting on each equalizer; lubricate both sides of
vehicle.
18
Two-Speed-Axle Shift Unit
†
Check oil level; add oil if low (35–04). Change oil (35–05) when
required.
19
Rear Axle
Check fluid level; add fluid, if low (35–01). Change fluid, when
required (35–03).
20
Slack Adjusters, Rear Axle
Lubricate slack adjusters on both sides of each rear axle, one
grease fitting for each slack adjuster.
21
Camshaft Brackets, Rear Axle
Lubricate camshafts on both sides of each rear axle; one grease
fitting for each camshaft bracket.
22
Fifth Wheel
†
Inspect the fifth wheel, then lubricate top plate and all moving
parts.
23
Air Valves
‡
Disassemble, clean, and lubricate all air valves.
*
Intervals and procedures are included in the "Maintenance Operations Tables" and the specific groups.
†
Not shown in illustration.
‡
Air valves are located throughout the vehicle; inside the cab and on the chassis.
Table 17, Lubrication Table for All Models but FL112
See
for lubrication points (FL112 models only).
General Information
00
Lubrication Tables: 00–18
00/28
No.
MOP No.
Components
Remarks
*
1
Front Suspension Spring Pins
and Shackle Pins
†
Lube both sides of vehicle; one grease fitting for each spring pin;
two grease fittings for each shackle.
2
Drag Link
Two grease fittings; one on each end.
3
Power Steering
Check fluid level in reservoir (46–03); change fluid and filter (46–
04), when required. Lubricate steering gear (46–05).
4
Steering Driveline
Lubricate grease fittings at slip-joint splines and both universal
joints. Lubricate miter gear (if applicable).
5
Slack Adjusters, Front Axle
Lubricate both sides of axle; one grease fitting for each slack
adjuster.
6
Camshaft Brackets, Front Axle
Lubricate both sides of axle; one grease fitting for each camshaft
bracket.
7
Oil-Lubricated All-Wheel-Drive
Front Axle
†
Check oil level; add oil if low (33–05). Change oil (33–06) when
required.
8
Tie Rod
Two grease fittings; one on each end of tie rod.
f000862
1
2
3
4
4
5
6
9
8
7
10
10
11
12
13
15
14
12
18
19
12
12
12
17
16
19
20
21
22
23
1
16
16
09/15/97
+
+
4
Fig. 2, Lubrication Points (FL112 models only)
General Information
00
Lubrication Tables: 00–18
00/29
No.
MOP No.
Components
Remarks
*
9
Knuckle Pins
Two grease fittings; one on top, one on bottom of knuckle pin.
Lubricate both sides of axle.
10
Clutch Release Bearing and
Release Cross-Shaft
One grease fitting on bottom of release bearing. Two grease
fittings on release cross-shaft.
11
Transmission
Check fluid level; add fluid, if low (26–01). Change fluid (26–02,
26–05, or 26–06), when required.
12
Driveline U-Joints and Slip-Joints
One grease fitting for each U-joint. One grease fitting for each
slip-joint.
13
Door Hinges, Latches, and
Weatherstrips
Lubricate all door hinges, latches, and weatherstrips on cab.
14
Batteries
Clean and lubricate if corrosion is present.
15
Air Reservoir Automatic Drain
Valves
Disassemble, clean, inspect, and lubricate the automatic drain
valves.
16
Suspension Spring Pin
†
Lubricate on both sides of vehicle; one grease fitting for each
spring pin.
17
Equalizer (Freightliner)
One grease fitting on each equalizer; lubricate on both sides of
the vehicle.
18
Two-Speed-Axle Shift Unit
†
Check oil level; add oil if low (35–04). Change oil (35–05) when
required.
19
Rear Axle
Check fluid level; add fluid, if low (35–01). Change fluid, when
required (35–03).
20
Slack Adjusters, Rear Axle
Lubricate slack adjusters on both sides of each rear axle, one
grease fitting for each slack adjuster.
21
Camshaft Brackets, Rear Axle
Lubricate camshafts on both sides of each rear axle; one grease
fitting for each camshaft bracket.
22
Fifth Wheel
†
Inspect the fifth wheel, then lubricate the top plate and all moving
parts.
23
Air Valves
‡
Disassemble, clean, and lubricate all air valves.
*
Intervals and procedures are included in the "Maintenance Operations Tables" and the specific groups.
†
Not shown in illustration.
‡
Air valves are located throughout the vehicle; inside the cab and on the chassis.
Table 18, Lubrication Table for FL112 Models Only
General Information
00
Lubrication Tables: 00–18
00/30
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст