Freightliner Business Class. Manual — part 6
Maint.
Oper. No.
M1 Maintenance Interval Operations
Brake Adjusting, Manual Slack Adjusters
Automatic Slack Adjuster Checking, Meritor
Air Brake Valve Operation Checking, Bendix R–14 and TC–7
Air Brake Valve Leak Checking, Bendix TC–7
Brake Lining Wear Checking, Hydraulic Disk Brakes
Brake Lines Checking, Hydraulic Disk Brakes
Power Booster Checking, Bendix Hydro-Max
Automatic Slack Adjuster Inspecting and Adjusting, Gunite
Air Conditioner Checking, R–12 and R–134a Refrigerant Systems
General Information
00
M1 Maintenance Interval Operations Table: 00–10
00/19
IMPORTANT: After performing all operations in this
table, perform all daily and weekly maintenance op-
erations listed in the "Pretrip Inspection and Daily
Maintenance" chapter of the
Business Class Trucks
Driver’s Manual
. Also, perform all M1 Maintenance
Interval Operations at the M2 Maintenance Interval.
NOTE: Maintenance operations appearing in italics in
this table are for noise emission control components.
Numbers in this table are maintenance operation ref-
erence numbers matching those in the text of this
manual. The M2 Maintenance consists of all M1 In-
terval Operations plus the other operations listed be-
low.
M2 Maintenance Interval Operations
Maint.
Oper. No.
M2 Maintenance Interval Operations
Perform All M1 Operations
Lubrication and Fluid Level Check (all but FL112, includes the following):
•
Two-Speed-Axle Shift Unit Oil Level Checking
•
Camshaft Bracket Bushing Lubricating
•
Air Reservoir Automatic Drain Valve Disassembly, Cleaning, Inspect-
ing, and Lubricating, Bendix DV–2
•
Steering Driveline Lubricating
Air Compressor Inspecting, Bendix
Radiator Cap Checking
Fan Clutch Checking
Allison, Eaton/Fuller, and Meritor Transmission Breather Checking
Eaton/Fuller Transmission Air Filter/Regulator Element Cleaning
Automatic Slack Adjuster Inspecting, Meritor
Exhaust System Inspecting
General Information
00
M2 Maintenance Interval Operations Table: 00–11
00/20
IMPORTANT: After performing all operations in this
table, perform all daily and weekly maintenance op-
erations listed in the "Pretrip Inspection and Daily
Maintenance" chapter of the
Business Class Trucks
Driver’s Manual
. Also, perform all M1 and M2 Mainte-
nance Interval Operations at the M3 Maintenance
Interval.
NOTE: Numbers in this table are maintenance opera-
tion reference numbers matching those in the text of
this manual. The M3 Maintenance consists of all M1
and M2 Interval Operations plus the other operations
listed below.
M3 Maintenance Interval Operations
Maint.
Oper. No.
M3 Maintenance Interval Operations
Perform All M1 Operations
Perform All M2 Operations
Engine Drive Belt Inspection
Clutch (Pull-Type) Inspecting and Adjusting
Allison Transmission Fluid and Filter Changing
Aisin Transmission Fluid and Filter Changing and Magnetic Plug Cleaning
Holland Fifth Wheel Sliding Mechanism Inspecting
U-Bolt Torque Checking
All-Wheel-Drive Front Axle Oil Changing
Two-Speed-Axle Shift Unit Oil Changing
Wheel Nut Checking
Air Dryer Checking, Bendix AD–9
Fuel Tank Draining and Vent Checking
Electrical System Checking
General Information
00
M3 Maintenance Interval Operations Table: 00–12
00/21
IMPORTANT: After performing all operations in this
table, perform all daily and weekly maintenance op-
erations listed in the "Pretrip Inspection and Daily
Maintenance" chapter of the
Business Class Trucks
Driver’s Manual
. Also, perform all M1, M2, and M3
Maintenance Interval Operations at the M4 Mainte-
nance Interval.
NOTE: Maintenance operations appearing in italics in
this table are for noise emission control components.
Numbers in this table are maintenance operation ref-
erence numbers matching those in the text of this
manual. The M4 Maintenance consists of all M1, M2,
and M3 Interval Operations plus the other operations
listed below.
M4 Maintenance Interval Operations
Maint.
Oper. No.
M4 Maintenance Interval Operations
Perform All M1 Operations
Perform All M2 Operations
Perform All M3 Operations
Engine-Support Fasteners Checking
Air Cleaner Element Inspecting and Replacing
Alternator, Battery, and Starter Checking
Radiator Pressure Flushing and Coolant Changing
Eaton Fuller and Meritor Transmission Oil Changing and Magnetic Plug
Cleaning
Frame Fastener Torque Checking
All-Axle Alignment Checking
Axle Lubricant Changing and Magnetic Plug Cleaning
Power Steering Reservoir Fluid and Filter Changing
Miter Gear Lubricating (Right-Hand Drive Only)
Gasoline In-Tank Fuel Filter Replacement
General Information
00
M4 Maintenance Interval Operations Table: 00–13
00/22
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст