Kia Carnival (2007 year). Manual — part 10

(4) Disconnect the injection harness connector(A), the No.2 VIS(Variable Induction System) connector(B), the

No.1/No.2 OCV(Oil Control Valve) connectors(C,D) and the OTS(Oil Temperature Sensor) connector(E).

(5) Disconnect the MAPS(Manifold Absolute Pressure Sensor) connector(A), the ETC(Electronic Throttle Control)

connector(B) and the PCSV(Purge Control Solenoid Valve) connector(C).

(6) Disconnect the generator connector(A) and the air conditioning compressor connector(B).

(7) Disconnect the bank 2 CMP sensor connector(A) and the ECT(Engine Coolant Temperature) sensor

connector(B).

(8) Disconnect the bank 2 front/rear O2 sensor connectors(A,B) and the CKP sensor connector(C).

(9) Disconnect the bank 1 CMP sensor connector(A).

7. Remove the PCV(Pulge Control Valve) hose(A).

8. Disconnect the brake vaccume hose(A).

9. Remove the heater hoses.

10. Remove the drive belt(A).

11. Remove the power steering pump.(Refer to 'ST' group).

12. Remove the exhaust manifold assembly.(Refer to 'Intake and exhause system').

13. Remove the intake manifold assembly.(Refer to 'Intake and exhause system').

14. Remove the timing belt.(Refer to 'Timing system').

15. Remove the ignition coils.

16. Remove the water temp. control assembly.

17. Remove the cylinder head cover(A).

18. Remove the camshaft bearing cap(A).

19. Remove the timing chain tensioner(A).

20. Remove the camshaft.

21. Remove the bank 2 timing belt rear cover(A).

22. Remove the bank 1 timing belt rear cover(A).