Kia Carnival (2007 year). Manual — part 9

2007 > 2.7L V6 GASOLINE >

COMPONENTS

2007 > 2.7L V6 GASOLINE >

REMOVAL

a. Use fender covers to avoid damaging painted surfaces.

b. To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal

temperature before removing it.

c. When handling a metal gasket, take care not to fold the gasket or damage the contact surface of the gasket.

d. To avoid damage, unplug the wiring connectors carefully while holding the connector portion.

a. Mark all wiring and hoses to avoid misconnection.

b. Turn the crankshaft pulley so that the No. 1 piston is at top dead center.

1. Remove the air duct and the battery(A) after disconnecting the terminals(B) from the battery.

2. Remove the engine cover.

3. Remove the intake air hose and air cleaner assembly.

(1) Disconnect the MAF connector(A).

(2) Disconnect the breather hose(B) from air cleaner hose.

(3) Remove the intake air hose and air cleaner assembly(C).

4. Remove the upper radiator hose(A) and lower radiator hose(B).

5. Remove the fuel inlet hose(A) from the delivery pipe.

6. Disconnect the engine wiring harness connectors.

(1) Disconnect the No.1/No.2 knock sensor connectors(A,B), the oil pressure switch connector(C), the ignition coil

harness(D) and the No.1 VIS(Variable Induction System) connector(E).

(2) Disconnect the bank 1 front/rear O2 sensor connectors(A).

(3) Disconnect the injection connectors(A,B,C), the ground lines(D), the condensor connector(E) and the Ignition

coil connectors(F).