Kia Carnival (2007 year). Manual — part 401

7. Remove the bolts(B), nut(C) and timing belt upper cover (A).

8. Turn the crankshaft pulley(A), and align its groove with timing mark “T” of the timing belt cover. Check that the

timing mark of camshaft sprocket(B) is aligned with the timing mark of cylinder head cover. (No.1 cylinder
compression TDC position)

9. Remove the crankshaft pulley bolt(A), washer(B) and crankshaft pulley (C).

Using the special tool(09517-21700, 09231-H1000), fix the crankshaft pulley and loosen the bolt(A).

10. Remove the drive belt idler(A).

11. Remove the drive belt auto-tensioner (A).

12. Remove the timing belt lower cover(A).

13. Remove the auto-tensioner(A) with the timing belt.

In reusing the timing belt, install the belt with the arrow mark facing to rotating direction.

14. Remove the timing belt sprocket(A).

15. Remove the timing belt No.1 idler(A).

16. Remove the timing belt No.2 idler(A).

17. Remove the touch idler(A).

18. Fix the high pressure pump pulley, using the setting bolt(B) for the pulley not to be rotated.

19. Remove the high pressure pulley nut(A), with the washer(B), pulley(C).

Using SST, remove the pulley. (Refer to FL group).

20. Using SST(09231-4X100), remove the camshaft pulley.