Kia Carnival (2007 year). Manual — part 121

16. After loosening the castle nut and split pin, disconnect the upper arm (A) from the carrier assembly using a SST

(09562-4A000).

Tightening torque Nm (kgf.m, lb-ft):
90 ~ 100 (9.0 ~ 10.0, 65 ~ 72)

17. Remove the carrier assembly (A) from the trailing arm by loosening the bolts.

Tightening torque Nm (kgf.m, lb-ft):
80 ~ 110 (8.0 ~ 11.0, 58 ~ 80)

INSTALLATION

1. Installation is the reverse of removal.

a. The rear hub lock nut should be replaced with new ones.

b. After installation lock nut, stake the lock nut using a chisel and hammer as shown in the illustration below.

2. Check the rear hub & bearing assembly starting torque using a spring balance.

20 kgf.cm

INSPECTION

1. Check the hub for cracks and wear.

2. Check the brake disc for scoring and damage.

3. Check the carrier for cracks.

CHAPTER 9:

Suspension System

General Information