Kia Carnival (2007 year). Manual — part 120

2007 > 2.7L V6 GASOLINE >

REMOVAL

1. Release the parking brake.

2. Remove the wheel & tire assembly.

Tightening torque Nm (kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~ 80)

3. Support lower part of the lower arm (A) using a jack and remove the bolt & nut (B).

Tightening torque Nm (kgf.m, lb-ft):
160 ~ 180 (16.0 ~ 18.0, 116 ~ 130)

4. Remove the coil spring (A) and upper pad.

5. Remove the wheel speed sensor (A).

6. Remove the rear brake caliper assembly (A) from the carrier assembly and suspend it with wire.

Tightening torque Nm (kgf.m, lb-ft):
50 ~ 60 (5.0 ~ 6.0, 36 ~ 43)

7. Remove the rear brake disc (A) by loosening the screws.

8. Unstake the lock nut using a chisel and hammer.

9. Remove the lock nut (A) and washer (B).

Tightening torque Nm (kgf.m, lb-ft):
200 ~ 260 (20.0 ~ 26.0, 145 ~ 188)

10. Remove the hub & bearing assembly (A).

11. Disconnect the parking brake cable (A) from the brake assembly.

12. Remove the clip (A) and bracket mounting bolt and disconnect the parking brake cable (B) from the carrier

assembly.

13. Remove the rear brake assembly (A).

Tightening torque Nm (kgf.m, lb-ft):
50 ~ 60 (5.0 ~ 6.0, 36 ~ 43)

14. Remove the rear shock absorber (A).

15. After loosening the castle nut and split pin, disconnect the assist arm (A) from the carrier assembly using a SST

(09568-4A000).

Tightening torque Nm (kgf.m, lb-ft):
90 ~ 100 (9.0 ~ 10.0, 65 ~72)