Kia Carens. Manual — part 168
21. Apply ATF to new O-rings and install them onto oil pipe assembly.
22. Install oil pipe assembly.
Tightening torque : 69.6~94.8 lb-in (7.9~10.7 N·m, 80~110 kg-cm)
23. Apply ATF to new O-ring and install it onto oil strainer assembly.
24. Install oil strainer onto control valve body and then tighten three bolts.
Tightening torque : 69.6~94.8 lb-in (7.9~10.7 N·m, 80~110 kg-cm)
Reassembly
1. Insert 3-4 shift spring, 3-4 shift valve, and stop plug.
Secure them with stop pin.
2. Insert low reducing spring, low reducing valve, and stop plug. Secure them with stop pin.
3. Insert 1-2 shift spring, 1-2 shift valve, and stop plug.
Secure them with stop pin.
4. Insert pressure regulator valve, pressure regulator spring, pressure regulator spring seat, regulator plug sleeve,
pressure regulator plug, and stop plug.
Secure them with roll pin.
5. Insert 2-3 timing valve and 2-3 timing spring.
Secure them with spring retainer.
6. Proceed to insert manual valve.
Inspection
1. Measure spring free lengths.
Item
Spring
Outer diameter
in (mm)
Free length
in (mm)
Number of coils
Wire diameter
in (mm)
Color
Pressure regulator spring
0.453
(11.5)
1.346
(34.2)
11.5
0.039
(1.0)
Red
1-2 shift spring
0.291
(7.4)
1.441
(36.6)
14.0
0.031
(0.8)
White
Low reducing spring
0.311
(7.9)
1.358
(34.5)
13.0
0.031
(0.8)
Yellow
3-4 shift spring
0.291
(7.4)
1.441
(36.6)
14.0
0.031
(0.8)
White
2. If not within specification, replace spring (s).
Automatic Transaxle System
=HS]L)VK`:`Z[LT<WWLY*VU[YVS=HS]L)VK`
Automatic Transaxle System
2001 > 1.8L DOHC >
Component
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст