Kia Carens. Manual — part 169

2001 > 1.8L DOHC >

Disassembly

1) Each valve should slide in/out under its own weight.
2) When a valve will not slide in/out under its own weight, depending on valve, push it out with a wire or

replace valve body open-side down and lightly tap it with a soft hammer.

3) If a valve surface or bore is scratched or damaged, replace control valve body.
4) Do not drop or lose valves or internal parts.
5) Before assembly, make sure all parts are thoroughly clean.
6) Apply ATF to all parts and bores.
7) Note proper direction of valves and internal parts.
8) Do not reuse any part that has been dropped.
9) Wrap a screwdriver or rod with tape before using it to insert a valve.

1. Disassemble in order shown in the figure.

Insepction

1. Measure spring free lengths.

2. If not within specification, replace spring(s).

Spring

Item

Solenoid reducing spring

P.E accumulator spring

Pitch diameter in (mm)

0.277 (7.0)

0.307 (7.8)

Free length in (mm)

1.531 (38.9)

2.007 (51.0)

Number of coils

11

20.5

Wire diameter in (mm)

0.035 (0.9)

0.047 (1.2)

Reassembly

1. Insert solenoid reducing valve and solenoid reducing spring then secure them with spring retainer.

2. Insert P.E accumulator valve and P.E accumulator spring then secure them with spring retainer.

Automatic Transaxle System

Valve Body System - Pre Main Control Valve Body

Automatic Transaxle System

Automatic Transaxle System

Valve Body System - Shift Control Solenoid Valve

Automatic Transaxle System

2001 > 1.8L DOHC >

Component