Kia Carens. Manual — part 174
Automatic Transaxle System
Clutch & Brake - One Way Clutch
Automatic Transaxle System
2001 > 1.8L DOHC >
Component
One-way clutch No. 1
One-way clutch No. 2 and planetary carrier assembly
2001 > 1.8L DOHC >
Disassembly
One-way clutch No. 1
1. Remove thrust bearing from small sun gear.
2. Remove snap ring with a snap ring pliers.
3. Remove one-way clutch inner race from sun gear drum.
4. Remove thrust bearing.
5. Remove snap ring with a snap ring pliers.
6. Remove small sun gear.
7. Remove one-way clutch No. 1, one-way clutch outer race and thrust bearing from sun gear drum.
Pre-inspection
One-way clutch No. 1 operation
1. While holding one-way clutch outer race, verify that one-way clutch inner race rotates smoothly when turned
conuterclockwise and locks when turned clockwise. If not as specified, replace one-way clutch No. 1
Disassembly
One-way clutch No. 2 and planetary carrier assembly
1. Disassembly in order shown in figure.
Inspection
One-way clutch No. 1
Small sun gear, sun gear drum
1. Measure small sun gear and sun gear drum inner diameters.
Inner diameter : Small sun gear : 0.828 in (21.021 mm) maximum
Sun gear drum : 1.198 in (30.425 mm) maximum
Inspection
One-way clutch No. 2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст