Kia Carens. Manual — part 152
3
Operate selector lever; are selector lever and
range indicator positions aligned?
Yes
Go to next step.
No
Adjust transaxle range switch.
4
Operate selector lever; does transaxle operate
normally and are selector lever and transaxle
position aligned?
Yes
Go to next step.
No
Overhaul transaxle and repair or replace parts
as necessary.
5
Are resistance of torque converter clutch
solenoid vlave and output voltage of TCM
terminal H-01/4 OK?
Vb : Battery Voltage
Solenoid valve resistance : 14~18Ω
Yes
Go to next step.
No
If resistance is not OK, check for
malfunctioning parts and wiring.
• Torque converter clutch solenoid.
If resistance is OK but Voltage is not, check
wiring and/or replace TCM.
6
Is line pressure OK?
Yes
Go to next step.
No
Check linear solenoid valve.
If line pressure is not within specifications after
linear solenoid valve inspection, replace
control valve body assembly.
7
Is engine stall speed OK?
Stall speed : 2200~2500 rpm
Yes
Check EMS parts & Engine and/or replace
TCM.
No
Overhaul transaxle and repair or replace parts
as necessary.
8
Stop vehicle on flat paved surface with engine
OFF.
Does vehicle move when pushed (except P
range, parking brake released)?
Yes
Overhaul transaxle and repair or replace parts
as necessary.
No
Parking mechanism malfunction.
Overhaul transaxle and repair or replace parts
as necessary.
11
Vehicle moves in N range
Description
• Vehicle creeps in N range
• Vehicle moves when accelerator pedal not depressed
(TROUBLESHOOTING HINTS)
1. Selector lever installation or adjustment incorrect
2. Powertrain damaged (forward clutch, coasting clutch, 3-4 clutch)
Step
Inspection
Action
1
Is selector lever operation OK?
Yes
Go to next step.
No
Adjust selector lever.
2
Operate selector lever ; are selector lever and
range indicator positions aligned?
Yes
Go to next step.
No
Adjust transaxle range switch.
3
Operate selector lever ; does transaxle operate
normally and are selector lever and transaxle
position aligned?
Yes
Go to next step.
No
Overhaul transaxle and repair or replace parts
as necessary.
12
Vehicle moves in P range
Description
• Vehicle rolls in P range
(TROUBLESHOOTING HINTS)
1. Selector lever installation or adjustment incorrect
2. Parking mechanism worn
3. Powertrain damaged (forward clutch, coasting, 3-4 clutch)
Step
Inspection
Action
1
Is selector lever operation OK?
Yes
Go to next step.
No
Adjust selector lever.
2
Operate selector lever ; are selector lever and
range indicator positions aligned?
Yes
Go to next step.
No
Adjust transaxle range switch.
3
Does transaxle operate normally and are
selector lever and transaxle position aligned?
Yes
Go to next step.
No
Overhaul transalxe and repair or replace parts
as necessary.
4
Stop vehicle on flat paved surface with engine
OFF.
Does vehicle move when pushed (except P
range, parking brake released)?
Yes
Overhaul transalxe and repair or replace parts
as necessary.
No
Parking mechanism malfunction.
Overhaul transaxle and repair or replace parts
as necessary.
13
Excessive creep
Description
• Vehicle moves quickly in D, 2, 1, and R ranges (accelerator pedal depressed)
Excessive N to R range and N to D range shift shock felt
(TROUBLESHOOTING HINTS)
Engine idle speed not adjusted correctly.
14
No shift
Description
• Single range shift (1GR→2GR, 2GR→3GR, or 3GR→O/d) only
• Sometimes shifts correctly
(TROUBLESHOOTING HINTS)
1. Selector lever installation or adjustment incorrect
2. Input/turbine speed sensor malfunction
3. Vehicle speed sensor malfunction
4. Throttle position sensor malfunction or misadjusted
5. Transaxle range switch worn or maladjusted
6. Line pressure low
7. Linear solenoid valve malfunction
8. O/D switch malfunction
9. Shift solenoid valve (A, B, C) malfunction
10. TCM malfunction
11. Control valve stuck
12. Powertrain damaged (forward clutch, 3-4 clutch, 2-4 band, one-way clutch 1)
Step
Inspection
Action
1
Check that no diagnostic trouble codes exist by
retrieving DTC's with a scan tool
Yes
Go to next step.
No
Diagnostic trouble code(s) displayed on O/D
indicator or scan tool.
• Check for cause of diagnostic trouble
code(s)
If problem remains, go to next step.
2
Is selector lever operation OK?
Yes
Go to next step.
No
Adjust selector.
3
Operate selector lever ; does transaxle operate
normally and are selector lever and transaxle
position aligned?
Yes
Go to next step.
No
Adjust transaxle range switch.
4
Operate selector lever ; are selector lever and
range indicator positions aligned?
Yes
Go to next step.
No
Overhaul transaxle and repair or replace parts
as necessary.
5
Disconnect solenoid 8-pin connector ; does
vehicle drive as follows?
Yes
Go to next step.
No
Replace control valve body assembly.
If problem remains, overhaul transaxle and
repair or replace parts as necessary.
6
Drive vehicle in D, 2, and 1 range ; does
vehicle start from stop in 1st gear?
Yes
Go to next step.
No
Overhaul transaxle and repair or replace parts
as necessary.
7
Are resistance and output voltage of shift
solenoids (A, B, C) at TCM terminals OK?
Vb : Battery voltage
Yes
Go to next step.
No
If resistance is not OK, check for
malfunctioning parts and wiring.
• Shift solenoid A
• Shift solenoid B
• Shift solenoid C
If resistance is OK but voltage is not, replace
TCM.
Solenoid valve resistance : 14~18Ω
• H-01/30 terminal : Shift solenoid A
• H-01/33 terminal : Shift solenoid B
• H-01/32 terminal : Shift solenoid C
8
Are resistance and output voltage of shift
solenoids (A,B,C) at TCM terminals OK?
Vb : Battery voltage
Yes
Go to next step.
No
If resistance is not OK, check for
malfunctioning parts and wiring.
• Throttle position sensor
• Input/turbine speed sensor
• Vehicle speed sensor
• O/D OFF switch
• Transaxle range switch
If resistance is OK but voltage is not, replace
TCM.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст