Kia Carnival (2009+). Manual — part 62

2009 > D 2.9 VGT >

COMPONENTS

2009 > D 2.9 VGT >

REMOVAL

• Use a cover not to damage the vehicle surface.
• Disconnect connectors carefully not to be damaged.

• Mark wires or hoses for identification not to be confused.

1. Remove the battery (A).

2. Disconnect the AFS connector (A).

3. Remove the air cleaner upper cover (B) by loosening the clips (A).

4. Remove the air cleaner assembly (A) by removing the two mounting bolts.

5. Disconnect the air cleaner hose (B) by loosening the clamp (A).

6. Remove the battery tray (B) by removing the four mounting bolts (A).

7. Remove the ground wire (A) from the transaxle case.

8. Remove the vehicle speed sensor connector (A).

9. Remove the shift cable by removing the bolt (A) and clip (B).

10. Disconnect the "N" (A) and the "R" (B) position switch.

11. Remove C.S.C (Concentric Slave Cylinder) tube which is being clamped.

12. Remove the CKP sensor from the clutch housing assembly.

13. Remove the mounting bolts of upper part of the transaxle.

14. Support the engine and transaxle by using the special tool (09200-38001).

15. Remove the transaxle insulator (B) and the bracket (C) by removing the bolts (A).