Kia Carnival (2009+). Manual — part 281

2009 > G 2.7 DOHC >

REMOVAL

1. Remove the both front wheel & tire assemblies.

2. Drain the power steering fluid.

3. Remove the bolt (A) connecting steering column to universal joint.

Tightening torque Nm (kgf.m, lb-ft):
13 ~ 18 (1.3 ~ 1.8, 9.4 ~ 13.0)

Keep the neutral-range to prevent the damage of the clock spring inner cable when you handlethe steering
wheel.

4. Disconnect the pressure tube (A) from the power steering oil pump by loosening eye bolt.

Tightening torque Nm (kgf.m, lb-ft):
65 ~ 75 (6.5 ~ 7.5, 47 ~ 54)

[Diesel]

[Gasoline]

5. Disconnect the return hose (A)

[Diesel]

[Gasoline]

6. Loosen the split pin and castle nut, and then remove the tie rod end (A) from the knuckle by using a SST (09568-

4A000).

Tightening torque Nm (kgf.m, lb-ft):
50 ~ 55 (5.0 ~ 5.5, 36 ~ 40)

7. Remove the split pin and lower arm bolts and nut (A).

Tightening torque Nm (kgf-m, lb-ft):
90 ~ 120 (9.0 ~ 12.0, 65 ~ 87)

8. Disconnect the stabilizer link (B) from the strut assembly (A) by loosening nut.

Tightening torque Nm (kgf.m, lb-ft):
100 ~ 120 (10.0 ~ 12.0, 72 ~ 87)

9. Repeat on the other side.

10. Remove the front and rear roll stopper bolts and nuts (A, B).

11. Remove the sub-frame by loosening the bolts and nuts.

12. Remove the rear roll stopper (A) from the sub-frame.