Kia Carnival (2009+). Manual — part 530
Body Electrical System
Ignition Switch Assembly - Ignition Switch
Body Electrical System
2009 > G 2.7 DOHC >
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel (Refer to the Body group - crash pad).
3. Remove the screws (2EA) and trip switch connector. Then remove the crash facia panel (B).
4. Remove the ignition switch (A) after loosening the screw with IG ON and disconnecting the 6P connector.
5. Remove the door warning switch and key illumination lamp (A) after loosening the screws (B) and disconnecting
the 6P connector.
6. Remove the key lock cylinder (C) after pushing lock pin (B) with key ACC.
7. Installation is the reverse of removal procedure.
Body Electrical System
Multiplex Communication - Driver Door
Module (DDM)
Body Electrical System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст