Kia Carnival (2009+). Manual — part 198

(5) Disconnect the MAPS(Manifold Absolute Pressure Sensor) connector(A), the ETC(Electronic Throttle Control)

connector(B) and the PCSV(Purge Control Solenoid Valve) connector(C).

(6) Remove the cooling fan relay cable(A).

(7) Disconnect the generator connector(A) and the air conditioning compressor connector(B).

(8) Disconnect the bank 2 CMP sensor connector(A) and the WTS(Water Temperature Sensor) connector(B).

(9) Disconnect the bank 2 front/rear O2 sensor connectors(A,B) and the CKP sensor connector(C).

(10) Disconnect the bank 1 CMP sensor connector(A).

11. Disconnect engine wiring.

(1) Remove the engine room fuse and relay box cover(A).

(2) Disconnect the PCM connectors(B).

(3) Disconnect the FAM connectors(C)(Refer to HA group).

(4) Unscrew the FAM mounting bolts(D-3EA) and take the FAM(E) out of the splash shield(F).

(5) Disconnect the connector(G) from the splash shield(B).

12. Remove the heater hoses.

13. Disconnect the brake vaccume hose(A).

14. After draining or gathering power steering fluid, disconnect the power steering hose(A).

15. Remove the radiator grille upper cover(A) for convenience sake.

16. Disconnect the power steering return hose.

17. Remove the radiator support upper member assembly(A) for convenience sake.

The bottom side bolt(A) which can be seen after removing the under cover should be loosened for removal of
the radiator support upper member assembly.

18. Drain engine oil.

19. Remove the brake caliper.(Refer to DS group).

20. Disconnect the air conditioning compressor hoses.(Refer to HA group).

21. Remove the front wheels and tires.(Refer to DS group).

22. Remove the brake caliper hub nut.(Refer to DS group).

23. Remove the tie rod end ball joint from the knuckle.(Refer to DS group)

24. Remove the driver shaft and the stabilizer bar link(Refer to SS group).

25. Remove the front muffler(A).

26. Using a floor jack, support the engine and transaxle assembly.

After removing the sub frame mounting bolt , the engine and transaxle assembly may fall downward, and so
support them securely with floor jack.