Suzuki Grand Vitara JB627. Manual — part 379
9C-9 Instrumentation / Driver Info. / Horn:
Illumination Indicator Symptom Diagnosis
S6JB0B9304009
Headlight Auto Leveling Indicator Symptom Diagnosis (If Equipped)
S6JB0B9304010
Condition
Possible cause
Correction / Reference Item
Illumination indicator
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Lighting switch faulty
Check lighting switch referring to “Headlight
Switch (in Lighting Switch) Inspection in
Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Illumination indicator
stays ON
Lighting switch faulty
Check lighting switch referring to “Headlight
Switch (in Lighting Switch) Inspection in
Section 9B”.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Headlight auto leveling
indicator does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Headlight auto leveling control module
faulty
Check headlight auto leveling control module
referring to “Inspection of Headlight Leveling
Control Module and Its Circuit (Vehicle
Equipped with Auto Leveling Headlight
System) in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
Headlight auto leveling
indicator stays ON
Headlight auto leveling control module
faulty
Check headlight auto leveling control module
referring to “Inspection of Headlight Leveling
Control Module and Its Circuit (Vehicle
Equipped with Auto Leveling Headlight
System) in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
Instrumentation / Driver Info. / Horn: 9C-10
A/T Power Mode Indicator Symptom Diagnosis (A/T Model)
S6JB0B9304011
A/T Shift Position Indicator Symptom Diagnosis (A/T Model)
S6JB0B9304012
Charge Warning Light Symptom Diagnosis
S6JB0B9304013
Condition
Possible cause
Correction / Reference Item
A/T power mode indicator
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
A/T power mode switch faulty
Check mode select switch referring to “Mode
Select Switch Inspection in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
A/T power mode indicator
stays ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
A/T power mode switch faulty
Check mode select switch referring to “Mode
Select Switch Inspection in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
All A/T shift position
indicator does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check TCM for DTC referring to “DTC Check
in Section 5A”.
Transmission range sensor (shift switch)
faulty
Check transmission range sensor referring to
“Transmission Range Sensor Inspection and
Adjustment in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
TCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Charge warning light
does not come ON
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Charge warning light stay
ON
Charging system faulty
Check charging system.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
9C-11 Instrumentation / Driver Info. / Horn:
Main Beam (High Beam) Indicator Symptom Diagnosis
S6JB0B9304014
Warning Buzzer Circuit Symptom Diagnosis
S6JB0B9304015
NOTE
• Use of SUZUKI scan tool makes it easy to check whether a faulty condition is on the input side or
output side of BCM. For checking procedure, refer to “Diagnosis Using Output Test Function of
SUZUKI Scan Tool” under “Scan Tool Data in Section 10B”.
• Check each part in the order from the top of the following list.
Condition
Possible cause
Correction / Reference Item
Main beam (high beam)
indicator does not come
ON
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Relay faulty
Replace relay
Combination switch faulty
Check combination switch referring to
“Headlight Switch (in Lighting Switch)
Inspection in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Main beam (high beam)
indicator stay ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Combination switch faulty
Check combination switch referring to
“Headlight Switch (in Lighting Switch)
Inspection in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Warning buzzer shows no
sounding
Circuit fuse blown
Replace fuse and check for short circuit.
Driver side door switch faulty
Check driver side door switch referring to
“Door Switch (Front / Rear / Rear End Door)
Inspection”.
Lighting switch faulty
Check lighting switch referring to “Headlight
Switch (in Lighting Switch) Inspection in
Section 9B”.
Key remainder switch faulty
Check key remainder switch referring to
“Ignition Switch Inspection”.
Wiring or ground faulty
Repair circuit.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Instrumentation / Driver Info. / Horn: 9C-12
Cigarette Lighter Symptom Diagnosis (If Equipped)
S6JB0B9304016
Horn Symptom Diagnosis
S6JB0B9304017
Information Display Symptom Diagnosis (If Equipped)
S6JB0B9304018
NOTE
This thermometer indicates the ambient temperature in back of front bumper. Under any one of the
following listed conditions, however, even when the ambient temperature goes up, the thermometer
display does not rise so as to correct the rise of the ambient temperature caused by the radiant heat of
the engine. When the ambient temperature drops, the thermometer reading follows the change in the
temperature.
Be sure to bear this in mind when diagnosing trouble.
• The vehicle speed is 30 km/h (18 mph) or lower.
• Vehicle speed signal is faulty.
• The ignition switch is turned on again within 2 hours.
Condition
Possible cause
Correction / Reference Item
Cigarette lighter shows
no operation
Circuit fuse blown
Replace fuse and check for short circuit.
ACC relay faulty
Replace relay
Cigarette lighter faulty
Check cigarette lighter.
Ignition switch faulty
Check ignition switch referring to “Ignition
Switch Inspection”.
Wiring or grounding faulty
Repair circuit.
Condition
Possible cause
Correction / Reference Item
Horn does not operate
Circuit fuse blown
Replace fuse and check for short circuit.
Horn switch faulty
Check horn switch.
Horn relay faulty
Check horn relay referring to “Horn Relay
Inspection”.
Wiring or grounding faulty
Repair circuit.
Horn faulty
Check horn referring to “Horn Inspection”.
Condition
Possible cause
Correction / Reference Item
No displaying of
information display
Circuit fuse Blown
Replace fuse and check for short circuit.
Wiring or grounding faulty
Repair as necessary.
Information display unit faulty
Replace unit.
Incorrect thermometer
display
Outside air temperature sensor faulty
Check outside air temperature sensor referring
to “Outside Air Temperature Sensor Inspection
(If Equipped)”.
Vehicle speed signal faulty
Check ECM for DTC referring to “DTC Check
in Section 1A”.
Wiring or grounding faulty
Repair as necessary.
Information display unit faulty
Replace unit.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Display does not change
at –30
°
C
Outside air temperature is –30
°C (–22
°F) or less
—
Outside air temperature sensor faulty
Check outside air temperature sensor referring
to “Outside Air Temperature Sensor Inspection
(If Equipped)”.
Information display unit faulty
Replace unit.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст