Suzuki Grand Vitara JB416 / JB420 / JB419. Manual — part 489
9C-8 Instrumentation / Driver Info. / Horn:
Oil Pressure Warning Light Symptom Diagnosis
S6JB0A9304006
Brake and Parking Brake Warning Light Symptom Diagnosis
S6JB0A9304007
Condition
Possible cause
Correction / Reference Item
Oil pressure warning light
does not light up when
ignition switch is turned
to ON position at engine
off
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Oil pressure switch faulty
Check oil pressure switch referring to “Oil
Pressure Switch Inspection”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Oil pressure warning light
stays ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Oil pressure switch faulty
Check oil pressure switch referring to “Oil
Pressure Switch Inspection”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Brake warning light does
not light up when brake
fluid level is low or
parking brake is pulled up
or for 2 seconds after
turning ON ignition switch
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Brake fluid level switch faulty
Check brake fluid level switch referring to
“Brake Fluid Level Switch Inspection”.
Parking brake switch faulty
Check parking brake switch referring to
“Parking Brake Switch Inspection”.
ABS system faulty
Refer to “ABS Check in Section 4E”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Brake warning light stays
ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Brake fluid level switch faulty
Check brake fluid level switch referring to
“Brake Fluid Level Switch Inspection”.
Parking brake switch faulty
Check parking brake switch referring to
“Parking Brake Switch Inspection”.
EBD system faulty
Refer to “EBD Warning Light (Brake Warning
Light) Check in Section 4E”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Instrumentation / Driver Info. / Horn: 9C-9
Seat Belt Reminder Light Symptom Diagnosis (If Equipped)
S6JB0A9304008
Illumination Indicator Symptom Diagnosis
S6JB0A9304009
Condition
Possible cause
Correction / Reference Item
Seat belt reminder light
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Seat belt switch faulty
Check seat belt switch referring to “Front Seat
Belt Inspection in Section 8A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Seat belt reminder light
stays ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Seat belt switch faulty
Check seat belt switch referring to “Front Seat
Belt Inspection in Section 8A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Illumination indicator
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Lighting switch faulty
Check lighting switch referring to “Headlight
Switch (in Lighting Switch) Inspection in
Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Illumination indicator
stays ON
Lighting switch faulty
Check lighting switch referring to “Headlight
Switch (in Lighting Switch) Inspection in
Section 9B”.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
9C-10 Instrumentation / Driver Info. / Horn:
Headlight Auto Leveling Indicator Symptom Diagnosis (If Equipped)
S6JB0A9304010
A/T Power Mode Indicator Symptom Diagnosis (A/T Model)
S6JB0A9304011
A/T Shift Position Indicator Symptom Diagnosis (A/T Model)
S6JB0A9304012
Condition
Possible cause
Correction / Reference Item
Headlight auto leveling
indicator does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Headlight auto leveling control module
faulty
Check headlight auto leveling control module
referring to “Inspection of Headlight Leveling
Control Module and Its Circuit (Vehicle
Equipped With Auto Leveling Headlight
System) in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
Headlight auto leveling
indicator stays ON
Headlight auto leveling control module
faulty
Check headlight auto leveling control module
referring to “Inspection of Headlight Leveling
Control Module and Its Circuit (Vehicle
Equipped With Auto Leveling Headlight
System) in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
Condition
Possible cause
Correction / Reference Item
A/T power mode indicator
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
A/T power mode switch faulty
Check mode select switch referring to “Mode
Select Switch Inspection in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
A/T power mode indicator
stays ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
A/T power mode switch faulty
Check mode select switch referring to “Mode
Select Switch Inspection in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
All A/T shift position
indicator does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check TCM for DTC referring to “DTC Check
in Section 5A”.
Transmission range sensor (shift switch)
faulty
Check transmission range sensor referring to
“Transmission Range Sensor Inspection and
Adjustment in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
TCM faulty
Replace after making sure that none of above
parts is faulty.
Instrumentation / Driver Info. / Horn: 9C-11
Charge Warning Light Symptom Diagnosis
S6JB0A9304013
Main Beam (High Beam) Indicator Symptom Diagnosis
S6JB0A9304014
Condition
Possible cause
Correction / Reference Item
Charge warning light
does not come ON
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Charge warning light stay
ON
Charging system faulty
Check charging system.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Main beam (high beam)
indicator does not come
ON
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Combination switch faulty
Check combination switch referring to
“Headlight Switch (in Lighting Switch)
Inspection in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Main beam (high beam)
indicator stay ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Combination switch faulty
Check combination switch referring to
“Headlight Switch (in Lighting Switch)
Inspection in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст