Suzuki Grand Vitara JB416 / JB420. Manual — part 368
9B-11 Lighting Systems:
Headlight Auto Leveling System Symptom Diagnosis (If Equipped)
S5JB0A9204019
Headlight Manual Leveling System Symptom Diagnosis (If Equipped)
S5JB0A9204010
Turn Signal and Hazard Warning Light Symptom Diagnosis
S5JB0A9204002
Condition
Possible cause
Correction / Reference Item
Headlight leveling
Warning Light comes on
steady
Height sensor faulty
Check height sensor referring to “Height
Sensor and Its Circuit Inspection (If
Equipped)”.
Wiring or ground faulty
Repair circuit.
Headlight leveling control module faulty Check headlight leveling control module for
function referring to “Inspection of Headlight
Leveling Control Module and Its Circuit
(Vehicle Equipped With Auto Leveling
Headlight System)”.
Optical axes of both
headlights do not change
Circuit fuse blown
Replace fuse and check for short circuit.
Supply voltage too low or too high
Check charging system referring to “Generator
Test (Undercharged Battery Check) in Section
1J” or “Generator Test (Overcharged Battery
Check) in Section 1J”.
Wiring or ground faulty
Repair circuit.
Headlight leveling control module faulty Check headlight leveling control module for
function referring to “Inspection of Headlight
Leveling Control Module and Its Circuit
(Vehicle Equipped With Auto Leveling
Headlight System)”.
Optical axis of only one
headlight does not
change
Headlight levering actuator faulty
Check actuator referring to “Headlight Leveling
Actuator Inspection (If Equipped)”.
Headlight housing deformed
Check actuator referring to “Headlight Leveling
Actuator Inspection (If Equipped)”.
Wiring or ground faulty
Repair circuit.
Condition
Possible cause
Correction / Reference Item
Optical axes of both
headlights do not change
Circuit fuse blown
Replace fuse and check for short circuit.
Headlight manual leveling switch faulty Check headlight manual leveling switch
referring to “Headlight Manual Leveling Switch
(If Equipped) Inspection”.
Supply voltage too low
Check charging system referring to “Generator
Test (Undercharged Battery Check) in Section
1J”.
Wiring or grounding faulty
Repair circuit.
Optical axis of only one
headlight does not
change
Circuit fuse blown
Replace fuse and check for short circuit.
Headlight leveling actuator faulty
Check actuator referring to “Headlight Leveling
Actuator Inspection (If Equipped)”.
Headlight housing deformed
Replace headlight housing.
Wiring or grounding faulty
Repair circuit.
Condition
Possible cause
Correction / Reference Item
Flash rate high or one
side only flashes
Bulb blown on “flash rate high”-side
Replace bulb.
Incorrect bulb
Replace bulb.
Turn signal / hazard warning relay faulty Check turn signal / hazard warning relay
referring to “Turn Signal and Hazard Warning
Relay Inspection”.
Open circuit or high resistance existing
either; between turn signal switch and
non lighting bulb, or between hazard
warning switch and non lighting bulb
Repair circuit.
Wiring or grounding faulty
Repair circuit.
Lighting Systems: 9B-12
Clearance, Tail and License Plate Light Symptom Diagnosis
S5JB0A9204003
NOTE
• Use of SUZUKI scan tool makes it easy to check whether a faulty condition is on the input side or
output side of BCM. For checking procedure, refer to “Diagnosis Using Output Test Function of
SUZUKI Scan Tool” under “Scan Tool Data in Section 10B”.
• Check each part in the order from the top of the following list.
Back-Up Light Symptom Diagnosis
S5JB0A9204004
No flashing
NOTE
• Use of SUZUKI scan
tool makes it easy to
check whether a faulty
condition is on the
input side or output
side of BCM. For
checking procedure,
refer to “Diagnosis
Using Output Test
Function of SUZUKI
Scan Tool”.
• Check each part in the
order from the top of
the following list.
Circuit fuse(s) blown
Replace fuse(s) and check for short circuit.
Turn signal / hazard warning relay faulty Check turn signal / hazard warning relay
referring to “Turn Signal and Hazard Warning
Relay Inspection”.
Turn signal light switch faulty
Check turn signal light switch referring to “Turn
Signal Light Switch (in Lighting Switch)
Inspection”.
Hazard warning switch faulty
Check hazard warning switch referring to
“Hazard Warning Switch Inspection”.
Open circuit or high resistance existing
between battery and switch
Repair circuit.
Wiring or grounding faulty
Repair circuit.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Flash rate low
Supply voltage low
Check charging system.
Turn signal / hazard warning relay faulty Check turn signal / hazard warning relay
referring to “Turn Signal and Hazard Warning
Relay Inspection”.
Condition
Possible cause
Correction / Reference Item
Condition
Possible cause
Correction / Reference Item
All lights do not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Lighting and dimmer switch of
combination switch faulty
Check lighting and dimmer switch referring to
“Headlight Switch (in Lighting Switch)
Inspection”.
Wiring or grounding faulty
Repair circuit.
BCM faulty
Check BCM for function referring to “Inspection
of BCM and its Circuits in Section 10B”.
Some lights do not light
up
Bulb(s) blown
Replace bulb(s).
Wiring or grounding faulty
Repair circuit.
Condition
Possible cause
Correction / Reference Item
Back-up lights do not
light up
Bulb(s) blown
Replace bulb(s).
Circuit fuse blown
Replace fuse and check for short circuit.
Back-up light switch (M/T model) or
transmission range sensor (A/T model)
faulty
Check back-up light switch or transmission
range sensor referring to “Back Up Light
Switch Inspection in Section 5B” or
“Transmission Range Sensor Inspection and
Adjustment in Section 5A”.
Wiring or grounding faulty
Repair circuit.
Back-up lights stay on
Back-up light switch (M/T model) or
transmission range sensor (A/T model)
faulty
Check back-up light switch or transmission
range sensor referring to “Back Up Light
Switch Inspection in Section 5B” or
“Transmission Range Sensor Inspection and
Adjustment in Section 5A”.
9B-13 Lighting Systems:
Stop (Brake) Lamp Symptom Diagnosis
S5JB0A9204005
Front Fog Light (If Equipped) Symptom Diagnosis
S5JB0A9204006
NOTE
• Use of SUZUKI scan tool makes it easy to check whether a faulty condition is on the input side or
output side of BCM. For checking procedure, refer to “Diagnosis Using Output Test Function of
SUZUKI Scan Tool” under “Scan Tool Data in Section 10B”.
• Check each part in the order from the top of the following list.
Rear Fog Light Symptom Diagnosis (If Equipped)
S5JB0A9204011
Illumination Cancel System Symptom Diagnosis (If Equipped)
S5JB0A9204012
Condition
Possible cause
Correction / Reference Item
Stop (brake) lamp do not
light up
Bulb(s) blown
Replace bulb(s).
Circuit fuse blown
Replace fuse and check for short circuit.
Stop (brake) lamp switch faulty
Check stop (brake) lamp switch referring to
“Stop (Brake) Lamp Switch Inspection”.
Wiring or grounding faulty
Repair circuit.
Stop (brake) lamp stay on Stop (brake) lamp switch faulty
Check or adjust stop (brake) lamp switch
referring to “Stop (Brake) Lamp Switch
Inspection” or “Brake Light Switch Adjustment
in Section 4A”.
Condition
Possible cause
Correction / Reference Item
Only one light does not
light
Bulb blown
Replace bulb.
Wiring or grounding faulty
Repair circuit.
Front fog lights do not
light
Circuit fuse blown
Replace fuse and check for short circuit.
Bulbs blown
Replace bulbs.
Front fog light switch faulty
Check front fog light switch referring to “Front
Fog Light Switch Inspection (If Equipped)”.
Front fog light relay faulty
Check front fog light relay referring to “Front
Fog Light Relay Inspection (If Equipped)”.
Wiring or grounding faulty
Repair circuit.
BCM faulty
Check BCM for function referring to “Inspection
of BCM and its Circuits in Section 10B”.
Condition
Possible cause
Correction / Reference Item
Rear fog light do not light Circuit fuse blown
Replace fuse and check for short circuit.
Bulb blown
Replace bulb.
Rear fog light switch faulty
Check rear fog light switch referring to “Rear
Fog Light Switch Inspection (If Equipped)”.
Wiring or grounding faulty
Repair circuit.
Condition
Possible cause
Correction / Reference Item
Illumination cancel do not
normal operation
Circuit fuse blown
Replace fuse and check for short circuit.
Illumination cancel switch faulty
Check illumination cancel switch referring to
“Illumination Cancel Switch (If Equipped)
Inspection”.
Combination meter and/or information
display (clock) faulty
Replace combination meter and/or information
display (clock).
Wiring or grounding faulty
Repair circuit.
Lighting Systems: 9B-14
Interior Light Symptom Diagnosis
S5JB0A9204007
NOTE
• Use of SUZUKI scan tool makes it easy to check whether a faulty condition is on the input side or
output side of BCM. For checking procedure, refer to “Diagnosis Using Output Test Function of
SUZUKI Scan Tool” under “Scan Tool Data in Section 10B”.
• Check each part in the order from the top of the following list.
Auto-On Headlight Operation Inspection (If
Equipped)
S5JB0A9204020
1) Turn ignition switch to ON position and then turn
lighting switch to “AUTO” position.
2) Release parking brake lever.
3) Check headlights for operation as follows. If
headlights do not turn ON or OFF, go to “Auto-On
Headlight System Symptom Diagnosis (If
Equipped)”.
a) Cover auto-on headlight sensor by hand and
check that headlights light up then.
b) Light over auto-on headlight sensor vertically
with on incandescent lamp of approx, 100 W
apart from about 100 mm (3.94 in.) (1) and check
that headlights go off then.
c) In the state as described in Step a), pull up
parking brake lever and check that headlights go
off then.
DRL Operation Inspection (If Equipped)
S5JB0A9204013
1) Confirm that lighting switch is in OFF position.
2) Confirm that dimmer and passing switch is in low beam position.
3) Check DRL for operation as follows.
a) Turn ignition switch to ON position and check headlights remain OFF.
b) Start engine and run it at idle speed. Check headlights turn ON at low beam.
c) Switch dimmer and passing switch to high beam position and check headlights remain tuning ON at low beam.
4) If a malfunction is found, go to “DRL System Symptom Diagnosis (If Equipped)”.
Condition
Possible cause
Correction / Reference Item
Dome light does not light
up
Bulb blown
Replace bulb.
Circuit fuse blown
Replace fuse and check for short circuit.
Dome light switch faulty
Check dome light switch.
Door switch faulty
Check door switch referring to “Door Switch
(Front / Rear / Rear End Door) Inspection in
Section 9C”.
Wiring or grounding
Repair circuit.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Luggage compartment
light (if equipped) does
not light up
Bulb blown
Replace bulb.
Back door switch faulty
Check switch referring to “Door Switch (Front /
Rear / Rear End Door) Inspection in Section
9C”.
Wiring or grounding faulty
Repair circuit.
[A]: Fig. for Step a)
[B]: Fig. for Step b)
[A]
[B]
1
I5JB0A920013-02
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст