Suzuki Grand Vitara JB416 / JB420. Manual — part 374
9C-5 Instrumentation / Driver Info. / Horn:
Low Fuel Warning Light Symptom Diagnosis
S5JB0A9304026
NOTE
Confirm that fuel meter is in good condition before referring to the following possible causes.
• When fuel level meter circuit is shorted to ground circuit, fuel level meter indicates empty even if
fuel tank does not empty.
• The low fuel warning light comes ON when fuel level is lower than specification below.
Low fuel warning light operation:
Oil Pressure Warning Light Symptom Diagnosis
S5JB0A9304027
Low fuel warning
light operation:
Fuel amount:
Resistance of fuel level sensor:
ON
Approx. 8.3 liter (G16 engine model)
Approx. 9.9 liter (J20 engine model)
250.8 – 255.8
Ω
Condition
Possible cause
Correction / Reference Item
Low fuel warning light
does not come ON when
fuel level is lower than
specification
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check ECM for DTC referring to “DTC Check
in Section 1A”.
Fuel level sensor faulty
Check fuel level sensor referring to “Fuel Level
Sensor Inspection”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
ECM faulty
Replace after making sure that none of above
parts is faulty.
Low fuel warning light
comes ON steady
Low fuel
Refill fuel.
Data (information) can not be received
by CAN communication
Check ECM for DTC referring to “DTC Check
in Section 1A”.
Fuel level sensor faulty
Check fuel level sensor referring to “Fuel Level
Sensor Inspection”.
Combination meter faulty
Replace combination meter.
ECM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Oil pressure warning light
does not light up when
ignition switch is turned
to ON position at engine
off
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Oil pressure switch faulty
Check oil pressure switch referring to “Oil
Pressure Switch Inspection”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Oil pressure warning light
stays ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Oil pressure switch faulty
Check oil pressure switch referring to “Oil
Pressure Switch Inspection”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Instrumentation / Driver Info. / Horn: 9C-6
Brake and Parking Brake Warning Light Symptom Diagnosis
S5JB0A9304028
Seat Belt Reminder Light Symptom Diagnosis (If Equipped)
S5JB0A9304029
NOTE
Seat belt reminder can be canceled by scan tool or specified procedure. If neither warning buzzer nor
seat belt reminder light operates, first confirm that seat belt reminder is not selected referring to “Scan
Tool Data in Section 10B”. For further details, refer to “Seat Belt Construction in Section 8A”.
Condition
Possible cause
Correction / Reference Item
Brake warning light does
not light up when brake
fluid level is low or
parking brake is pulled up
or for 5 seconds after
turning ON ignition switch
(with ABS vehicle only)
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Brake fluid level switch faulty
Check brake fluid level switch referring to
“Brake Fluid Level Switch Inspection”.
Parking brake switch faulty
Check parking brake switch referring to
“Parking Brake Switch Inspection”.
ABS system faulty
Refer to “ABS Check in Section 4E”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Brake warning light stays
ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Brake fluid level switch faulty
Check brake fluid level switch referring to
“Brake Fluid Level Switch Inspection”.
Parking brake switch faulty
Check parking brake switch referring to
“Parking Brake Switch Inspection”.
EBD system faulty
Refer to “EBD Warning Lamp (Brake Warning
Lamp) Check in Section 4E”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Seat belt reminder light
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Seat belt switch faulty
Check seat belt switch referring to “Front Seat
Belt Inspection in Section 8A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Seat belt reminder light
stays ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Seat belt switch faulty
Check seat belt switch referring to “Front Seat
Belt Inspection in Section 8A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
9C-7 Instrumentation / Driver Info. / Horn:
Illumination Indicator Symptom Diagnosis
S5JB0A9304031
Headlight Auto Leveling Indicator Symptom Diagnosis (If Equipped)
S5JB0A9304032
A/T Power Mode Indicator Symptom Diagnosis (A/T Model Only)
S5JB0A9304033
Condition
Possible cause
Correction / Reference Item
Illumination indicator
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Lighting switch faulty
Check lighting switch referring to “Headlight
Switch (in Lighting Switch) Inspection in
Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Illumination indicator
stays ON
Lighting switch faulty
Check lighting switch referring to “Headlight
Switch (in Lighting Switch) Inspection in
Section 9B”.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Headlight auto leveling
indicator does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Headlight auto leveling control module
faulty
Check headlight auto leveling control module
referring to “Inspection of Headlight Leveling
Control Module and Its Circuit (Vehicle
Equipped With Auto Leveling Headlight
System) in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
Headlight auto leveling
indicator stays ON
Headlight auto leveling control module
faulty
Check headlight auto leveling control module
referring to “Inspection of Headlight Leveling
Control Module and Its Circuit (Vehicle
Equipped With Auto Leveling Headlight
System) in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
Condition
Possible cause
Correction / Reference Item
A/T power mode indicator
does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
A/T power mode switch faulty
Check mode select switch referring to “Mode
Select Switch Inspection in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Instrumentation / Driver Info. / Horn: 9C-8
A/T Shift Position Indicator (A/T Model Only) Symptom Diagnosis
S5JB0A9304034
Charge Warning Light Symptom Diagnosis
S5JB0A9304035
Main Beam (High Beam) Indicator Symptom Diagnosis
S5JB0A9304036
A/T power mode indicator
stays ON
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
A/T power mode switch faulty
Check mode select switch referring to “Mode
Select Switch Inspection in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Condition
Possible cause
Correction / Reference Item
All A/T shift position
indicator does not light up
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check TCM for DTC referring to “DTC Check
in Section 5A”.
Transmission range sensor (shift switch)
faulty
Check transmission range sensor referring to
“Transmission Range Sensor Inspection and
Adjustment in Section 5A”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
TCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Charge warning light
does not come ON
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Charge warning light stay
ON
Charging system faulty
Check charging system.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Condition
Possible cause
Correction / Reference Item
Main beam (high beam)
indicator does not come
ON
Circuit fuse blown
Replace fuse and check for short circuit.
Data (information) can not be received
by CAN communication
Check BCM for DTC referring to “DTC Check
in Section 10B”.
Relay faulty
Replace relay
Combination switch faulty
Check combination switch referring to
“Headlight Switch (in Lighting Switch)
Inspection in Section 9B”.
Wiring or ground faulty
Repair circuit.
Combination meter faulty
Replace combination meter.
BCM faulty
Replace after making sure that none of above
parts is faulty.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст