BMW 325xi Sports Wagon (2006 year). Instruction — part 8
131
Changing route criteria
1.
Select "Navigation" and press the control-
ler.
2.
Move the highlight marker to the third field
from the top. Turn the controller until
"Route preference" is selected and press
the controller.
The various criteria are listed on the Control
Display.
3.
Select a route criterion for the route:
>
"With highways"
Highways and major traffic arteries are
given priority.
>
"Avoid highways"
Highways are avoided as far as possible.
>
"Fast route"
The fast route, being a combination of
the shortest possible route and the fast-
est roads
>
"Short route"
Short route, irrespective of how fast or
slow progress will be
4.
Press the controller.
The route criterion is highlighted.
5.
If necessary, select an additional route cri-
terion and then press the controller:
>
"Avoid tollroads"
Toll roads are avoided as far as possible.
>
"Avoid ferries"
Ferries are avoided as far as possible.
To exit from the menu:
Select the
arrow and press the controller.
With the Professional navigation system, the
route criteria can also be changed in the arrow
or map display:
Select the corresponding symbol and press
the controller.
Word-matching principle
The system's word-matching principle makes it
easier for you to enter the names of streets or
towns. The system runs ongoing checks, com-
paring your destination entries with the data
stored on the navigation DVD as the basis for
instant response. The benefits for you include:
>
Names of specific locations can also vary
from the official versions if you are using a
spelling that is customary in another coun-
try.
Example:
Instead of the German spelling "München"
you can also enter the English spelling
"Munich" or the Italian spelling "Monaco".
>
When you are entering the names of towns
and streets the system will complete them
automatically as soon as enough letters are
available to ensure unambiguous identifica-
tion.
>
The system only accepts name entries
beginning with letters that are stored on the
navigation DVD. The system will not accept
non-existent names and addresses.
Destination guidance
132
Destination guidance
Starting destination
guidance
.
1.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Navigation" is selected and press the
controller.
2.
Select the destination from the destination
list and press the controller or enter a new
destination, refer to page
.
3.
Select "Start guidance" and press the con-
troller.
After the route has been calculated, destination
guidance is indicated by arrows or a map on the
Control Display.
The destination guidance can also be started in
the arrow or map display:
Select the
symbol and press the controller.
During destination guidance, you can operate
other equipment items at any time via iDrive.
You will be notified in time of any necessary
change of direction by means of spoken
instructions and the display of the direction
arrow.
Terminating/continuing
destination guidance
In the arrow or map display
Select the
symbol and press the controller.
In the destination list
This symbol indicates the current destina-
tion.
1.
Select the current destination and press the
controller.
133
2.
Select "Start guidance" and press the con-
troller.
If you did not reach your destination before the
end of your last journey, the following question
will appear in the display at the start of the next
journey:
"Continue guidance to destination?".
The destination guidance starts automatically
after a short time.
To start destination guidance immediately:
Select "Yes" and press the controller.
Route display
You have the option of displaying various views
of the route during destination guidance.
From another menu, you can switch
directly to the screen last displayed, refer
to Convenient call-up of menu items on
page
.
<
Displaying arrow view
1.
Select "Navigation" and press the control-
ler.
2.
Move the highlight marker to the fourth field
from the top. Turn the controller until
"Arrow display" is selected and press the
controller.
The arrow display is shown.
1 Switching voice instructions on/off
2 Selecting route criteria
3 Starting/stopping destination guidance
4 Arrow to destination as the crow flies
5 Distance to the next change of direction
6 Current location
7 Direction of travel
>
Outline of an arrow:
Destination guidance on the calculated
route
>
Solid arrow:
Arrow points as the crow flies to the cal-
culated route whenever the vehicle is
not in an area recorded on the navigation
DVD, e.g. in a parking garage.
Depending on your vehicle's equipment, the
projected time of arrival and distance to the
destination is displayed in the top or bottom line
of the Control Display.
The arrows change appearance before a
change of direction.
Destination guidance
134
1 Street name for change of direction
2 Distance to change of direction
3 Change of direction
To exit from the menu:
Select the
arrow and press the controller.
Displaying maps
You can have your current position displayed on
a map. After starting the destination guidance,
the planned route is shown on the map.
1.
Select "Navigation" and press the control-
ler.
2.
Move the highlight marker to the fourth field
from the top. Turn the controller until the
desired map view is selected:
>
"Map facing north"
>
"Map direction of travel"
>
"Perspective"
3.
Press the controller.
1 Switching voice instructions on/off
2 Starting/stopping destination guidance
3 Map-guided destination selection
4 Showing/hiding information last selected,
refer to Selecting destination using infor-
mation on page
5 Changing map view
>
"Map facing north"
>
"Map direction of travel"
>
"Perspective"
6 Changing route criteria
7 Arrow to destination as the crow flies
The projected time of arrival and distance to the
destination is displayed in the bottom line of the
Control Display.
To exit from the menu:
Select the
arrow and press the controller.
At scales of less than 300 miles/500 km, you
have the option of deciding whether to orient
the map to north, toward your current direction
of travel, or show the map in perspective. At
scales of 300 miles/500 km or greater, the map
always points toward north.
Changing map view
Select the corresponding symbol and press the
controller.
The next map view is displayed.
To change scale
Turn the controller to adjust the scale.
135
Displaying towns/cities and streets
along the route
You can have the roads and towns along the
route displayed during destination guidance.
The distances remaining to be traveled within
each section of the route are also displayed.
1.
Select "Navigation" and press the control-
ler.
2.
Move the highlight marker to the third field
from the top. Turn the controller until
"Route list" is selected and press the con-
troller.
To exit from the menu:
Select the
arrow and press the controller.
Destination guidance
through voice instructions
Switching voice instructions on/off
Voice instructions can be switched on or off
during the destination guidance in the arrow or
map view:
Select the
symbol and press the controller.
To switch the voice instructions on/off at any
time:
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Turn the controller until "Display settings"
is selected and press the controller.
4.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Languages" is selected and press the
controller.
5.
Select "Navigation voice instructions on"
and press the controller.
The voice instructions are switched on.
Repeat voice instructions and cancel
With the programmable buttons on the steering
wheel, you can also execute the following func-
tions, refer to page
:
>
Repeat the voice instruction:
Press the button.
>
Switch voice instructions on/off:
Press the button for a longer period.
Adjusting volume of voice instructions
The volume can be adjusted only while a voice
instruction is being issued.
Destination guidance
136
1.
Repeat the last voice instruction, if neces-
sary.
2.
Turn the button during the voice instruction
to select the desired volume.
This volume is independent of the volume of the
audio sources.
The setting is stored for the remote control cur-
rently in use.
Bypassing route sections
During destination guidance, you can revise the
navigation system's route recommendations to
avoid particular stretches of road. Enter the
number of miles/kilometers that you want to
travel before returning to the original route.
1.
Select "Navigation" and press the control-
ler.
2.
Move the highlight marker to the third field
from the top. Turn the controller until "New
route" is selected and press the controller.
3.
Turn the controller to enter the desired
number and press the controller.
The route is recalculated.
To exit from the menu without changing the
route:
Select the
arrow and press the controller.
Displaying current position
You can have your current position displayed
even when the destination guidance is
switched off.
1.
Select "Navigation" and press the control-
ler.
2.
Move the highlight marker to the fourth field
from the top. Turn the controller until "Cur-
rent position" is selected and press the
controller.
The current position of your BMW is displayed.
If the navigation system is unable to identify a
town or city, your current map coordinates will
appear.
To exit from the menu:
Select the
arrow and press the controller.
You can also have the current position dis-
played on a map, refer to page
.
137
What to do if …
What to do if …
>
a navigation DVD is inserted, but an instruc-
tion to insert the DVD appears on the Con-
trol Display?
The navigation DVD may not be the correct
DVD for the navigation system. This infor-
mation is indicated on the DVD label.
>
you request the current position of your
vehicle, but do not receive a precise dis-
play?
The system is unable to receive enough
GPS signals at your current position owing
to obstructions, your current position is not
yet available on your navigation DVD, or the
system is in the process of calculating your
current position. As a rule, reception is
guaranteed when you are in the open.
>
the destination guidance does not accept a
destination?
The data of the destination is not stored on
the navigation DVD that is loaded. Choose a
destination as close as possible to the orig-
inal one.
>
the destination guidance does not accept
an address without the street name?
On the navigation DVD, no downtown area
can be determined for the city or town
entered. Enter any street, or a destination
such as the railway station in the selected
town, and then start the destination guid-
ance.
>
you want to enter a destination for the des-
tination guidance, but it is not possible to
select the letters for your desired entry?
The data of the destination is not stored on
the navigation DVD that is loaded. In this
case, the system will not offer you any let-
ters to choose from. Choose a destination
as close as possible to the original one.
>
the system stops furnishing directions on
which way to turn as you approach intersec-
tions?
You are driving in an area that has not yet
been completely recorded on the naviga-
tion DVD. Instead of an arrow indicating a
turn, you will see an arrow which indicates
the general direction of your planned route.
Or you have left the recommended route
and the system requires a few seconds to
calculate a new recommended route.
>
the navigation system does not react to
entries?
If the battery was disconnected, it takes
about 10 minutes before the system is once
again operational.
On/off and s
e
tt
ings
140
On/off and settings
The following audio sources have shared con-
trols and setting options:
>
Radio
>
CD player
>
CD changer
*
Controls
The audio sources can be operated using:
>
Buttons near the CD player
>
iDrive
>
Buttons
on the steering wheel, refer to
Buttons near the CD player
1 Sound output for entertainment on/off, vol-
ume
>
Press: switch on/off.
When you switch on, the last set radio
station or CD track is played.
>
Turn: adjust volume.
2 Drive for audio CDs
3
Eject CD
4
Station scan/track search
>
Change radio station.
>
Select track for CD player and CD
changer.
5 Drive for navigation DVD
Operation via iDrive
.
1.
Press the
button.
This opens the start menu.
2.
Move the controller backwards to call up
"Entertainment".
You have the following choices:
>
"FM" and "AM": radio reception
>
"WB": Weather Band station
>
"SAT": satellite radio
>
"CD": CD player or changer
>
"Audio Aux": external audio device
>
"Set": depending on the audio source,
other adjustments can be made, e.g. with
the radio: update station with strongest
reception, store station, tone control, sam-
ple stations.
From another menu, you can switch
directly to the screen last displayed, refer
to Convenient call-up of menu items on
page
<
The selected audio source is stored for the
remote control currently in use.
Switching on/off
In order to switch the entertainment sound out-
put on and off:
Press button
1 on the CD player.
This symbol on the Control Display indi-
cates that sound output is switched off.
141
Adjusting volume
Turn knob
1 on the CD player until the desired
volume is obtained.
You can also adjust the volume with buttons on
the steering wheel, refer to page
.
The setting is stored for the remote control cur-
rently in use.
Tone control
You can alter various tone settings, e.g. treble
and bass or the speed-dependent volume
increase.
The tone settings are applied to all audio
sources.
The settings are stored for the remote control
currently in use.
Changing tone settings
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Select "Entertainment settings" and press
the controller.
4.
Select "Audio" and press the controller.
The tone settings can also be selected if you
have called up "Entertainment" in the start
menu:
Select "Set" and then "Tone", and press the
controller.
Treble and bass
1.
Select "Treble / Bass" and press the con-
troller.
2.
Move the controller to the left or right to
select "Treble" or "Bass".
3.
Turn the controller until the desired setting
is selected.
Balance and fader
You can adjust the volume distribution in the
same manner as "Treble / Bass".
>
"Balance": left/right volume distribution
>
"Fader": front/rear volume distribution
Speed-dependent volume control
The speed-dependent volume control auto-
matically increases the volume with increasing
driving speed. You can set various stages for
the increase in volume.
On/off and s
e
tt
ings
142
1.
Select "Speed volume" and press the con-
troller.
2.
Turn the controller:
The adjustment is applied; the field can be
changed.
Professional LOGIC7 HiFi System*
You can select a spatial sound effect that
improves the spatial acoustics in all frequency
ranges.
1.
Select "LOGIC7" and press the controller.
2.
Select "Concert hall" or "Theater".
3.
Press the controller.
LOGIC7 spatial sound is switched on.
To switch off the spatial sound effect:
Select "Off" and press the controller.
LOGIC7 and the LOGIC7 logo are registered
trade marks of Lexicon, Inc., a company of the
Harman International Group.
Equalizer
You can set individual sound frequency ranges.
1.
Select "Equalizer" and press the controller.
2.
Move the controller to the left or right to
select the desired frequency range.
3.
Turn the controller until the desired setting
is selected.
143
Resetting tone settings
You can reset all tone settings to the default
setting.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Entertainment settings" and press
the controller.
4.
Select "Audio" and press the controller.
5.
Select "Reset" and press the controller.
Ra
di
o
144
Radio
Your radio provides reception of the FM and AM
wavebands:
Listening to the radio
Press the button if the sound output is switched
off.
iDrive concept, refer to page
.
1.
Press the
button.
This opens the start menu.
2.
Move the controller backwards to call up
"Entertainment".
3.
If necessary, move the highlight marker to
the uppermost field. Select "FM" or "AM".
4.
Press the controller.
Stations are shown on the Control Display on
the basis of various selection criteria, e.g. "Pre-
sets".
If "Autostore" does not show a station in the AM
waveband or if the displayed stations are no
longer receivable, update the stations with the
strongest received signal, refer to page
Changing stations
Turn the controller.
Buttons on the CD player
Press the button for the corre-
sponding direction.
The system switches to the next displayed sta-
tion.
You can also change the station with buttons on
the steering wheel, refer to page
Changing selection criteria
In addition to the stations currently displayed,
you can have stations with another selection
criterion displayed.
You can choose from the following selection
criteria:
>
"All stations":
Stations that can currently be received on
the "FM" waveband.
>
"Autostore":
The stations with the strongest received
signals in the "AM" waveband.
>
"Presets":
Stations you have previously stored, refer to
page
To change the selection criterion:
145
1.
Move the highlight marker to the second
field from the top.
2.
Choose a selection criterion and press the
controller.
Sampling stations, scan
The stations on the current waveband are auto-
matically sampled in succession.
1.
Select "FM" or "AM" and press the control-
ler.
"Set" is selected.
2.
Press the controller.
Other menu items are displayed.
3.
Select "Scan" and press the controller.
Scan starts.
To stop the scan:
1.
Press the controller.
2.
Select "Scan" and press the controller.
This cancels the scan search, and the radio
remains on the current station.
Buttons on the CD player
To start scan, hold down the corre-
sponding direction button.
To stop scanning, press the button again.
Selecting the frequency manually
With "Manual" you can select stations that are
received in addition to those displayed.
1.
Select "FM" or "AM" and press the control-
ler.
2.
Move the highlight marker to the second
field from the top.
3.
Select "Manual" and press the controller.
4.
Turn the controller to set a certain fre-
quency.
Updating stations with best reception
If on a longer journey you move out of the
reception range of the stations originally
received, you can update the list of stations
received with the strongest signals in the AM
waveband.
1.
Select "AM" and press the controller.
2.
Move the highlight marker to the second
field from the top.
3.
Select "Autostore" and press the controller.
"Set" is selected.
4.
Press the controller.
Other menu items are displayed.
Ra
di
o
146
5.
Select "Autostore" and press the controller.
The display of the stations with the strongest
reception is updated. The frequencies of the
stations are displayed.
Storing stations
1.
Select "FM" or "AM" and press the control-
ler.
2.
Move the highlight marker to the second
field from the top. Turn the controller until
the desired selection criterion is chosen
and press the controller.
3.
Select the desired frequency or station.
"Set" is selected.
4.
Press the controller.
Other menu items are displayed.
5.
Select "Store" and press the controller.
"Presets" is displayed.
6.
Turn the controller until the desired mem-
ory position is selected.
The number of the memory position
appears beside the name or frequency of
the station.
7.
Press the controller.
The station is stored.
The channels of the last selection criterion are
displayed once again after a short time.
The stations are stored for the remote control
currently in use.
Changing a memory position
1.
Select "Presets" and press the controller.
2.
Select the desired station.
"Set" is selected.
3.
Press the controller.
Other menu items are displayed.
147
4.
Select "Store" and press the controller.
5.
Turn the controller until the desired mem-
ory position is selected.
The number of the memory position
appears beside the name or frequency of
the station.
6.
Press the controller.
The station is stored.
RDS Radio Data System
RDS transmits additional information in the FM
frequency range. If the reception conditions are
good, the station names are shown on the Con-
trol Display. Where reception is poor or in the
event of interference, it may take some time
before the station names will appear in the dis-
play.
Switching RDS on/off*
1.
Select "FM" or "AM" and press the control-
ler.
"Set" is selected.
2.
Press the controller.
Other menu items are displayed.
3.
Select "RDS" and press the controller.
RDS is activated.
Weather reports*
Weather Radio is a service provided by the
National Oceanic and Atmospheric Administra-
tion (NOAA) of the US Department of Com-
merce. Weather reports are repeated every four
to six minutes and routinely updated in intervals
of one to three hours, or more frequently if nec-
essary. Most stations operate 24 hours a day. In
the event of storms, the National Weather Ser-
vice interrupts the routine weather reports to
broadcast special warnings. If you have any
questions regarding NOAA Weather Radio,
please contact your local National Weather Ser-
vice office. You can also obtain more informa-
tion from the Internet at www.nws.noaa.gov.
Calling up weather reports
1.
Select "WB" and press the controller.
2.
Select the station.
The station for weather reports may be unavail-
able in some regions.
High Definition Radio*
Many stations transmit analog as well as digital
signals. You can receive these stations digitally,
resulting in better sound quality.
Switching digital radio reception on
and off
iDrive concept, refer to page
.
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
Ra
di
o
148
3.
Select "Entertainment settings" and press
the controller.
4.
Select "HD radio" and press the controller.
5.
Select "Off" and press the controller.
Digital radio reception is switched on.
This symbol appears in the display when a
station is being received digitally.
Some stations do not transmit digital signals
simultaneously with analog signals. If you are
driving through an area in which digital signals
are not consistently received from the selected
station, the system switches between analog
and digital reception. This can result in repeti-
tions or interruptions. In such cases, it may be
advisable to switch off digital radio reception.
Updating digitally receivable stations
If on a longer journey you move out of the
reception range of the stations originally
received, you can update the list of stations
received with the strongest signals.
1.
Select "FM" or "AM" and press the control-
ler.
2.
Move the highlight marker to the second
field from the top.
3.
Select "Autostore" and press the controller.
4.
Press the controller.
Other menu items are displayed.
5.
Select "Autostore
" and press the con-
troller.
The display of digitally receivable stations is
updated. This can take up to 2 minutes.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст